ALTEX YACHT & BOAT PAINT N05 ANTIFOULING OYSTER WHITE

국가: 오스트레일리아

언어: 영어

출처: APVMA (Australian Pesticides and Veterinary Medicines Authority)

지금 구매하세요

환자 정보 전단 (PIL)

20-06-2017

제품 특성 요약 (SPC)

20-06-2017

유효 성분:

THIRAM; COPPER PRESENT AS CUPROUS OXIDE; XYLENE

제공처:

RESENE PAINTS (AUSTRALIA) LIMITED

INN (International Name):

Cu as cuprous oxide(332g/L)+thiram(44g/L)

약제 형태:

PAINT

구성:

THIRAM CARBAMATE-DITHIOCARBAMATE Active 44.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 332.0 g/L; XYLENE SOLVENT Other 205.0 g/L

패키지 단위:

10L; 1L; 4L

수업:

A - Agricultural

Manufactured by:

RESENE PAINTS

치료 그룹:

치료 영역:

ANTIFOULING

치료 징후:

FOULING - FOR ANTIFOULING ON BOATS

제품 요약:

Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [FOULING - FOR ANTIFOULING ON BOATS]; FERRO-CEMENT HULL: [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [FOULING - FOR ANTIFOULING ON BOATS]; FERRO-CEMENT HULL: [FOULING - FOR ANTIFOULING ON BOATS]; An ablative antifouling for use on suitably prepared steel, fibreglass, ferro-cement and wooden hulls.DO NOT USE on aluminium hulls or stern drives

승인 상태:

Registered

승인 날짜:

2023-07-01

환자 정보 전단

--
-
--
--
-
-------
--
----
---
---
------
----
-
---
-
------
-----
---
---
---
- - -
-----
-------
------
----
-
--
--
~--
Aitex Yacht
&
Boat No.5 Antifouling Oyster Whi
te-
4
&
10
~i
t
res
Page
1
o{q
.
·
Primary
pack-
Front panel
.
·
251
10110
POIS
.
ON
KEEP
.
OUT
OF
REACH OF CHILDREN
READ
SAFETY
DIRECTIONS BEFORE OPENING
OR
USING.
ALTEX
YACHT
&
BOAT PAINT
Oyst
er
White
•
·NO.5 .ANTIFOULING .
RL
P
Appro
ve
d
Active constituents:
332 g/L COPPER present as cuprous oxide
44
g/L TH I
RAM
SOL
VE
NT:
205 g/L Xylene
AN ABLATIVE ANTiFOULING FOR USE ON SUITABLY PREPAR.ED STEEL,
FIBREGLASS, FERROCEMENT AND
WOODEN
HULLS
:
.
.
Info
PEST

Verified
DIRECTIONS FOR USE
RESTRAINTS: DO
NOT
use
on
aluminium hulls or stern drives
.
.
SURFACE PREPARATION: ALTEX · No.5 Antifouling paint is designed
to.
overcoat. Altex
Yacht & Boat Bottom Systems.
AL
TEX
No.5 Antifouling is compatible with a wide range
of
antr:corrosive and antifouling paints.
Its use over products other than Altex Yacht & Boat
~ottom
Systems
should
be
referred
to
Resene
Paints
(Australia)
Limited
for
specific
recomme.ndation.
s.
If
AL
TEX No:5 Antifouling is applied over an .epoxy hull coating, it must
be
applied before the epoxy has fully cured hard,
ie
when the epoxy is
tack
free hut still soft to
fing'er nail pressure.
For
the repainting
of
existing antifouling and to facilitate bottom cleaning
we
· recommend high
pressure
water
blast cleaning
(5000 psi
minimum) and wash with
At
lEX
P40 Pre-Painting Cleaner diluted 1 part to 10 parts water. It is
recommended that
after 3-4 repaints that the old antifouling coatings be removed arid
then repaint the hull with
Alt~x
Yacht & Boat Bottom System and ALTEX No.5 Antifouling as above.
MIXING AND THINNING:
Stir thoroughly before use.
ALTEX
No.5 Antifouling
does not
require
th
inning, except possibly in hot windy conditions.
If
thinned, additional coats
may
be ·
req~ired
to attain correct .film thickness. Film thickness is critical to the
performance
of
the
coa.ting.
·
APPLICATION: Apply two coats to achieve a m

전체 문서 읽기

제품 특성 요약

MSDS: No.5 Antifouling Oyster White Low Odour
Page 1 of 8
Printed:23/09/10
Revision No. 01
Resene Paints (Australia) Limited trading as Altex Coatings.
07/07/2010
MATERIAL SAFETY DATA SHEET
SECTION 1.
IDENTIFICATION OF THE MATERIAL AND SUPPLIER
PRODUCT NAME
ALTEX YACHT & BOAT NO.5 ANTIFOULING OYSTER WHITE. LOW
ODOUR
OTHER NAMES
Paint. Product Code N5LWHS.
RECOMMENDED USE
Antifouling paint for application by brush, roller or spray for the
control of marine
growth on the hulls of ships.
COMPANY NAME
ADDRESS
Resene Paints (Australia) Limited T/A Altex Coatings.
7 Production Avenue
Ernest Junction, Queensland 4214.
EMERGENCY TEL
Available Monday – Friday, 8:00 a.m. – 5:00 p.m.
FREE CALL
PHONE
FAX
1800 738 383
07 5512 6600
07 5512 6698
SECTION 2.
HAZARDS IDENTIFICATION
HAZARD STATEMENT
HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According
to the criteria of NOHSC and the ADG Code.
HAZARD CLASSIFICATION
Xn Harmful
Xi Irritant
N Dangerous for the environment
RISK PHRASES
R10 Flammable.
R20/21 Harmful by inhalation and in contact with skin.
R43 May cause sensitization by skin contact.
R50 Very toxic to aquatic organisms.
R53 May cause long term adverse effects in the aquatic environment.
SAFETY PHRASES
S16 Keep away from source of ignition-No smoking.
S23 Do not breathe gas/fumes/vapour/spray.
S24/25 Avoid contact with skin and eyes.
S37 Wear suitable gloves.
S60 This material and its container must be disposed of as hazardous
waste.
S61 Avoid release to the environment. Refer to special
instructions/Material Safety
Data Sheets.
SECTION 3.
COMPOSITION/INFORMATION ON INGREDIENTS
INGREDIENTS
NAME
CAS
PROPORTION (V/V)%
Xylene
1330-20-7
10 - < 30
Rosin
8050-09-7
10 - < 30
Dicopper Oxide
1317-39-1
< 10
Pigments
Mixture
< 10
Zinc oxide
1314-13-2
< 10
Thiram
137-26-8
< 10
Ethanol
64-17-5
< 10
Ingredients determined not to be hazardous
-
balance
MSDS: No.5 Antifouling Oyster White Low Odour
Page 2 of 8
Printed:23/09/10
Revision No. 01
Resene Paints (Australia) Limited trading as Altex Coatings.
07/07/2010
SECTION 4.
FIRST AID MEAS

전체 문서 읽기