Land: Australien
Sprog: engelsk
Kilde: APVMA (Australian Pesticides and Veterinary Medicines Authority)
THIRAM; COPPER PRESENT AS CUPROUS OXIDE; XYLENE
RESENE PAINTS (AUSTRALIA) LIMITED
Cu as cuprous oxide(332g/L)+thiram(44g/L)
PAINT
THIRAM CARBAMATE-DITHIOCARBAMATE Active 44.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 332.0 g/L; XYLENE SOLVENT Other 205.0 g/L
10L; 1L; 4L
A - Agricultural
RESENE PAINTS
BOAT - EXTERIOR (ANTIFOULING) | COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS | FERRO-CEMENT HULL | FIBREGLASS HULL | STEEL HULL | TI
ANTIFOULING
FOULING - FOR ANTIFOULING ON BOATS
Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [FOULING - FOR ANTIFOULING ON BOATS]; FERRO-CEMENT HULL: [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [FOULING - FOR ANTIFOULING ON BOATS]; FERRO-CEMENT HULL: [FOULING - FOR ANTIFOULING ON BOATS]; An ablative antifouling for use on suitably prepared steel, fibreglass, ferro-cement and wooden hulls.DO NOT USE on aluminium hulls or stern drives
Registered
2023-07-01
-- - -- -- - ------- -- ---- --- --- ------ ---- - --- - ------ ----- --- --- --- - - - ----- ------- ------ ---- - -- -- ~-- Aitex Yacht & Boat No.5 Antifouling Oyster Whi te- 4 & 10 ~i t res Page 1 o{q . · Primary pack- Front panel . · 251 10110 POIS . ON KEEP . OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING. ALTEX YACHT & BOAT PAINT Oyst er White • ·NO.5 .ANTIFOULING . RL P Appro ve d Active constituents: 332 g/L COPPER present as cuprous oxide 44 g/L TH I RAM SOL VE NT: 205 g/L Xylene AN ABLATIVE ANTiFOULING FOR USE ON SUITABLY PREPAR.ED STEEL, FIBREGLASS, FERROCEMENT AND WOODEN HULLS : . . Info PEST Verified DIRECTIONS FOR USE RESTRAINTS: DO NOT use on aluminium hulls or stern drives . . SURFACE PREPARATION: ALTEX · No.5 Antifouling paint is designed to. overcoat. Altex Yacht & Boat Bottom Systems. AL TEX No.5 Antifouling is compatible with a wide range of antr:corrosive and antifouling paints. Its use over products other than Altex Yacht & Boat ~ottom Systems should be referred to Resene Paints (Australia) Limited for specific recomme.ndation. s. If AL TEX No:5 Antifouling is applied over an .epoxy hull coating, it must be applied before the epoxy has fully cured hard, ie when the epoxy is tack free hut still soft to fing'er nail pressure. For the repainting of existing antifouling and to facilitate bottom cleaning we · recommend high pressure water blast cleaning (5000 psi minimum) and wash with At lEX P40 Pre-Painting Cleaner diluted 1 part to 10 parts water. It is recommended that after 3-4 repaints that the old antifouling coatings be removed arid then repaint the hull with Alt~x Yacht & Boat Bottom System and ALTEX No.5 Antifouling as above. MIXING AND THINNING: Stir thoroughly before use. ALTEX No.5 Antifouling does not require th inning, except possibly in hot windy conditions. If thinned, additional coats may be · req~ired to attain correct .film thickness. Film thickness is critical to the performance of the coa.ting. · APPLICATION: Apply two coats to achieve a m Læs hele dokumentet
MSDS: No.5 Antifouling Oyster White Low Odour Page 1 of 8 Printed:23/09/10 Revision No. 01 Resene Paints (Australia) Limited trading as Altex Coatings. 07/07/2010 MATERIAL SAFETY DATA SHEET SECTION 1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER PRODUCT NAME ALTEX YACHT & BOAT NO.5 ANTIFOULING OYSTER WHITE. LOW ODOUR OTHER NAMES Paint. Product Code N5LWHS. RECOMMENDED USE Antifouling paint for application by brush, roller or spray for the control of marine growth on the hulls of ships. COMPANY NAME ADDRESS Resene Paints (Australia) Limited T/A Altex Coatings. 7 Production Avenue Ernest Junction, Queensland 4214. EMERGENCY TEL Available Monday – Friday, 8:00 a.m. – 5:00 p.m. FREE CALL PHONE FAX 1800 738 383 07 5512 6600 07 5512 6698 SECTION 2. HAZARDS IDENTIFICATION HAZARD STATEMENT HAZARDOUS SUBSTANCE. DANGEROUS GOODS. According to the criteria of NOHSC and the ADG Code. HAZARD CLASSIFICATION Xn Harmful Xi Irritant N Dangerous for the environment RISK PHRASES R10 Flammable. R20/21 Harmful by inhalation and in contact with skin. R43 May cause sensitization by skin contact. R50 Very toxic to aquatic organisms. R53 May cause long term adverse effects in the aquatic environment. SAFETY PHRASES S16 Keep away from source of ignition-No smoking. S23 Do not breathe gas/fumes/vapour/spray. S24/25 Avoid contact with skin and eyes. S37 Wear suitable gloves. S60 This material and its container must be disposed of as hazardous waste. S61 Avoid release to the environment. Refer to special instructions/Material Safety Data Sheets. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS INGREDIENTS NAME CAS PROPORTION (V/V)% Xylene 1330-20-7 10 - < 30 Rosin 8050-09-7 10 - < 30 Dicopper Oxide 1317-39-1 < 10 Pigments Mixture < 10 Zinc oxide 1314-13-2 < 10 Thiram 137-26-8 < 10 Ethanol 64-17-5 < 10 Ingredients determined not to be hazardous - balance MSDS: No.5 Antifouling Oyster White Low Odour Page 2 of 8 Printed:23/09/10 Revision No. 01 Resene Paints (Australia) Limited trading as Altex Coatings. 07/07/2010 SECTION 4. FIRST AID MEAS Læs hele dokumentet