国: オーストラリア
言語: 英語
ソース: APVMA (Australian Pesticides and Veterinary Medicines Authority)
ZINEB; CUPROUS OXIDE; COPPER PYRITHIONE
JOTUN AUSTRALIA PTY LTD
PAINT
ZINEB CARBAMATE-DITHIOCARBAMATE Active 90.0 g/L; CUPROUS OXIDE MINERAL-COPPER Active 503.0 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 24.0 g/L
10L; 20L; 5L
A - Agricultural
ANTIFOULING
Poison schedule: 6; Withholding period: ; Host/pest details: MARINE VESSELS BELOW THE WATERLINE: [MARINE GROWTH]
Registered
2023-07-01
Product Name: APVMA Approval No: Antifouling SeaForce Active Plus 87840 / 119538 Label Name: Antifouling SeaForce Active Plus Signal Headings: POISON KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING Constituent Statements: ACTIVE CONSTITUENTS: 432 grams/L COPPER AS CUPROUS OXIDE 85 grams/L ZINEB 24 grams/L COPPER PYRITHIONE SOLVENT: 352 g/L liquid hydrocarbons Statement of Claims: Antifouling SeaForce Active Plus is used for control of marine growth beneath the water line on vessels Net Contents: 5L, 10L 20L Restraints: For professional use only Directions for Use: ANTIFOULING SEAFORCE ACTIVE PLUS is applied over an anti-corrosive coating (such as SAFEGUARD UNIVERSAL ES) or existing ANTIFOULING SEAFORCE ACTIVE PLUS which has been high pressure washed and allowed to dry thoroughly. MIXING: thoroughly power mix before use THINNING: Thin up to 15% with Jotun THINNER NO 7 APPLICATION METHOD: spray is preferred, brush/roller are acceptable but extra coats may be required to achieve the correct thickness. COVERAGE: theoretical coverage is 5.5 m2/L per coat DRY FILM THICKNESS: Recommended at 125 microns per coat. Normally 2-3 coats are required. Contact Jotun for specific advice. DRYING TIME: at 23°C: allow minimum of 7 hours between coats. TIME BEFORE LAUNCHING at 23°C: Allow minimum 7 hours and max. 48 hours Other Limitations: NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS LABEL, UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION RLP APPROVED Precaution: Protections: Storage and Disposal: STORAGE & DISPOSAL Store in the closed original container, in a cool, well ventilated area. Do not store for prolonged periods in direct sunlight. Do not re-use any empty container; small amounts of paint can be allowed to solidify by leaving the container unsealed. Dispose of empty containers by crushing and disposing in an industrial waste bin or at a municipal refuse disposal site. DO NOT pour leftover paint down drains. Keep unwanted paint in sealed containers for disposal via specifie 完全なドキュメントを読む