DELAVAL TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT

Quốc gia: Úc

Ngôn ngữ: Tiếng Anh

Nguồn: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Thành phần hoạt chất:

AVAILABLE IODINE; GLYCERINE; PROPYLENE GLYCOL

Sẵn có từ:

DELAVAL PTY LTD

INN (Tên quốc tế):

propylene glycol(220g/L)+glycerol(215g/L)+available iodine(40g/L)

Dạng dược phẩm:

TOPICAL SOLUTION/SUSPENSION

Thành phần:

AVAILABLE IODINE MINERAL Active 40.0 g/L; GLYCERINE SOLVENT Active 215.0 g/L; PROPYLENE GLYCOL SOLVENT Active 220.0 g/L

Các đơn vị trong gói:

1000L; 100L; 110L; 200L; 20L; 25L; 5L

Lớp học:

VM - Veterinary Medicine

Khu trị liệu:

DERMATOLOGICAL PREPS.

Tóm tắt sản phẩm:

Poison schedule: 6; Withholding period: WITHHOLDING PERIOD: EXPORT SLAUGHTER I NTERVAL (ESI): ZERO (0) DAYS BEFORE US ING THIS PRODUCT CONFIRM THE CURRENT ESI FROM DELAVAL ON [phone] OR APVMA WEBSITE (www.apvma.gov.au/resid ues); Host/pest details: COW (TEAT/UDDER): [MASTITIS, TEAT SANITISER]; An aid in reducing the spread of mastitis -causing organisms in lactating dairy cows.

Tình trạng ủy quyền:

Registered

Ngày ủy quyền:

2023-07-01

Tờ rơi thông tin

Page 1 of 2
DELAVAL TEATSAN EXTRA CONCENTRATED POST MILKING TEAT
SANITISER WITH EMOLLIENT
69709/110455
Product Name:
APVMA Approval No:
Label Name:
DELAVAL TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER
WITH EMOLLIENT
Signal Headings:
POISON
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
FOR ANIMAL TREATMENT ONLY
Constituent
Statements:
220g/L PROPYLENE GLYCOL, 215g/L GLYCERINE
40g/L AVAILABLE IODINE
Mode of Action:
Statement of Claims:
An aid in reducing the spread of mastitis-causing organisms in
lactating dairy cows
Net Contents:
5L, 20L, 25L, 100L, 110L, 200L, 1000L
Dosage and
Adminstration:
Ensure teats are CLEAN and DRY before milking to reduce organic and
bacterial
contaminations and iodine residue in the milk. If washing is required
for heavily soiled
udders or teats, ensure they are properly dried. Thoroughly spray or
dip all teats after every
milking. Mix fresh solutions daily. Do not top up solutions made up on
a previous day.
To make a 0.5% available iodine solution (also containing 5%
emollient), dilute 1 part
Teatsan' with 7 parts of clean potable water or cooled boiled tap
water. Emollient such as
DeLaval's udder emollient may be included to a maximum of 10% of the
final solution. If
emollient is added, dilute 2.5 parts of `Teatsan' in 16.5 parts of
water with 1 part of
emollient.
Dip: Use a plastic or other non-metal type container for iodine
solution. Clean out dip cup as
teat dip gets low. Do not top up the dip cup.
Spray: Spray upwards from underneath the teats, not from the side and
ensure the whole
surface of each teat is covered and a droplet forms on the teat end. RLP APPROVED
Page 2 of 2
Environmental
statements:
First Aid:
Disposal:
Metal drums and plastic containers: This container can be recycled if
it is clean, dry, free of
visible residues and has the drumMUSTER logo visible. Triple or
pressure rinse container
for disposal. Dispose of rinsate or any undiluted chemical according
to State legislative
requirements. Wash outside of the container and t

Bảng dữ liệu an toàn

DeLaval Pty. Ltd. ACN 004 210 459, 1 Global Drive, Westmeadows,
Victoria 3049, Australia. Ph. [phone], Fax [phone]
www.delaval.com.au
20 L
TEATSAN
EXTRA CONCENTRATED POST MILKING TEAT
SANITISER WITH EMOLLIENT
ACTIVE CONSTITUENTS: 220g/L PROPYLENE GLYCOL
215g/L GLYCERINE
40g/L AVAILABLE IODINE
An aid in reducing the spread of mastitis-causing organisms in
lactating
dairy cows
TEATSAN EXTRA CONCENTRATED POST MILKING TEAT SANITISER WITH EMOLLIENT
DIRECTIONS FOR USE
Ensure teats are CLEAN and DRY before milking to reduce organic and
bacterial
contaminations and iodine residue in the milk. If washing is required
for heavily
soiled udders or teats, ensure they are properly dried. Thoroughly
spray or dip all
teats after every milking. Mix fresh solutions daily. Do not top up
solutions made up
on a previous day.
DOSAGE AND ADMINISTRATION: To make a minimum of 0.5% available iodine
solution
(also containing 5% emollient), dilute 1 part “Teatsan” with 7
parts of clean potable
water or cooled boiled tap water. Emollient such as “DeLaval Udder
Emollient” may
be included to a maximum of 10% of the final solution. lf emollient is
added, dilute
2.5 parts of “Teatsan” in 16.5 parts of water with 1 part of
emollient.
To mix up a 20L batch 
of
‘Teatsan’ solution:
Without additional
emollient (5% emollient)
With additional emollient
(10% emollient)
Teatsan
2.5L
2.5L
Emollient
None
1L
Water
17.5L
16.5L
20 Litres
20 Litres
Dip: Use a plastic or other non-metal type container for iodine
solution. Clean out
dip cup as teat dip gets low. Do not top up the dip cup.
Spray: Spray upwards from underneath the teats, not from the side and
ensure the
whole surface of each teat is covered and a droplet forms on teat end.
WITHHOLDING PERIOD(S): ZERO (0) DAYS
EXPORT SLAUGHTER INTERVAL (ESI): ZERO (0) DAYS
SAFETY DIRECTIONS
If skin contact occurs, remove contaminated clothing and wash skin
thoroughly. If
in eyes, hold eyes open, flood with water for at least 15 minutes and
see a doctor. If
poisoning occurs contact