WATTYL PROTECTIVE AND MARINE COATINGS SEAPRO PLUS 100 ANTIFOULING

Nchi: Australia

Lugha: Kiingereza

Chanzo: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Viambatanisho vya kazi:

COPPER PRESENT AS CUPROUS THIOCYANATE; DIURON

Inapatikana kutoka:

HEMPEL (WATTYL) AUSTRALIA PTY LTD

INN (Jina la Kimataifa):

Cu as CuCNS(172g/L)+diuron(65g/L)

Dawa fomu:

PAINT

Tungo:

COPPER PRESENT AS CUPROUS THIOCYANATE CYANIDE Active 172.0 g/L; DIURON UREA-SUBSTITUTED Active 65.0 g/L

Vitengo katika mfuko:

1L-20L

Darasa:

A - Agricultural

Viwandani na:

VALSPAR PAINT

Kundi la matibabu:

BOAT - EXTERIOR (ANTIFOULING)

Eneo la matibabu:

ANTIFOULING

Matibabu dalili:

MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS

Bidhaa muhtasari:

Poison schedule: 0; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; Poison schedule: 0; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; A single-pack, tin free, antifouling.

Idhini hali ya:

Stopped

Idhini ya tarehe:

2023-07-01

Taarifa za kipeperushi

READ SAFETY DIRECTIONS BEFORE OPENING OR USING
WATTYL
PROTECTIVE AND MARINE COATINGS
SEAPRO PLUS 100 ANTIFOULING
ACTIVE CONSTITUENTS: 172 G/L COPPER PRESENT AS 290 G/L CUPROUS
THIOCYANATE
65 G/L DIURON
A single - pack, tin free, antifouling
OFF WHITE
CLEANER: ...............................
L703
THINNER: ................................
L703
REFER TECHNICAL DATA SHEET: ..
P60.02
CONTENTS 20 LITRES
{Insert bar code here}
BN:
DOM:
Manufactured by WATTYL Australia Pty Ltd, 4 Steel Street, Blacktown,
NSW 2148
APPROVED
LABEL
Info
PEST


Verified
DIRECTIONS FOR USE: The success of an antifouling job depends on the
dry film build applied,
which has a direct effect on the life expectancy. Irrespective of how
this product is applied, it is the
owner’s responsibility to ensure that the total nominated film
thickness is achieved. Depending upon
method of application and prevailing conditions multiple coats may be
necessary. The preferred
method of application is by spray.
APPLICATION: Ensure surface is dry and free from any contamination and
sufficiently roughened if
necessary. Substrate temperature must be at least 3°C above dew
point. Each coat may be applied at
75 microns dry film (150 microns wet film) and usually 2 coats are
required to protect the vessel during
a 12 - 24 month period. (Spray application only - brush and roller
coats are thinner and the number of
coats adjusted to account for thinner coats)
METHOD OF APPLICATION: Spray gun (use respiratory protection), brush
or roller. STIR WELL
BEFORE AND DURING USE. Use over a suitable high-performance
anti-corrosive coating such as
the Wattyl recommended coal-tar epoxy, epoxy, chlorinated rubber, or
vinyl tar.
LAUNCHING: Allow a minimum of 10 hours (at 20°C) after the last coat
of paint prior to launching.
Check data sheet for drying times at higher dry film thickness and
less favourable weather conditions.
Treated surfaces must be immersed within 30 days of application of
this antifouling.
NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS
LABEL

Tabia za bidhaa

WATTYL (VALSPAR PAINT (AUSTRALIA))
Chemwatch Hazard Alert Code: 2
WATTYL SEAPRO PLUS 100 ANTIFOULING MCR
Chemwatch: 5104-09
Version No: 8.1.1.1
Safety Data Sheet according to WHS and ADG requirements
Issue Date: 09/01/2014
Print Date: 09/03/2016
Initial Date: NOT AVAILABLE
S.GHS.AUS.EN
SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY
/ UNDERTAKING
PRODUCT IDENTIFIER
PRODUCT NAME
Wattyl Seapro Plus 100 Antifouling MCR
SYNONYMS
Seapro Plus 100 Antifouling MCR
PROPER SHIPPING NAME
PAINT (including paint, lacquer, enamel, stain, shellac, varnish,
polish, liquid filler and liquid lacquer base) or PAINT RELATED
MATERIAL (including paint thinning or reducing compound)
OTHER MEANS OF
IDENTIFICATION
Not Available
RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED
AGAINST
RELEVANT IDENTIFIED
USES
The use of a quantity of material in an unventilated or confined space
may result in increased exposure and an irritating
atmosphere developing. Before starting consider control of exposure by
mechanical ventilation.
Use according to manufacturer's directions.
DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET
REGISTERED COMPANY
NAME
Wattyl (Valspar Paint (Australia))
ADDRESS
Level 4, 2 Burbank Place Baulkham Hills 2153 NSW Australia
TELEPHONE
[phone]
FAX
[phone]
WEBSITE
Not Available
EMAIL
Not Available
EMERGENCY TELEPHONE NUMBER
ASSOCIATION /
ORGANISATION
Not Available
EMERGENCY TELEPHONE
NUMBERS
1800 039 008
OTHER EMERGENCY
TELEPHONE NUMBERS
1800 039 008
SECTION 2 HAZARDS IDENTIFICATION
CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
HAZARDOUS CHEMICAL. DANGEROUS GOODS. ACCORDING TO THE WHS REGULATIONS
AND THE ADG CODE.
CHEMWATCH HAZARD RATINGS
Max
Min
Flammability
2
Toxicity
2
Body Contact
2
Reactivity
1
Chronic
0
0 = Minimum
1 = Low
2 = Moderate
3 = High
4 = Extreme
POISONS SCHEDULE
Not Applicable
CONTINUED...
CLASSIFICATION
[1]
Flammable Liquid Category 3, Acute Toxicity (Oral) Category 4, Acute
Toxicity (Dermal) Category 4, Acute Toxicity
(Inhalation) Category 4, Chronic Aqu