ANTIFOULING SEAVICTOR 40

Nchi: Australia

Lugha: Kiingereza

Chanzo: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Viambatanisho vya kazi:

COPPER PRESENT AS CUPROUS OXIDE; XYLENE

Inapatikana kutoka:

JOTUN AUSTRALIA PTY LTD

INN (Jina la Kimataifa):

Cu as cuprous oxide(674-692g/L)

Dawa fomu:

PAINT

Tungo:

COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 695.0 g/L; XYLENE SOLVENT Other 287.0 g/L

Vitengo katika mfuko:

10L; 20L; 4L; 5L

Darasa:

A - Agricultural

Kundi la matibabu:

BOAT - EXTERIOR (ANTIFOULING)

Eneo la matibabu:

ANTIFOULING

Matibabu dalili:

FOULING - FOR ANTIFOULING ON BOATS

Bidhaa muhtasari:

Poison schedule: 5; Withholding period: WHP: N/A.; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 5; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; To control general marine fouling on vessels constructed from steel, fibreglass and timber.

Idhini hali ya:

Registered

Idhini ya tarehe:

2023-07-01

Taarifa za kipeperushi

_'_
_·.: _
JOTUN
AUSTRALIA
PTY
.
LTD
9 Cawley Road, Brooklyn,
Victoria, 3125
Telephone: [phone]
In
a Transport Emergency,
Dial 000 Police or Fire Brigade
I
READ SAFETY DIRECTIONS BEFORE OPENING
OR
USING
ANTIFOULING SEA VICTOR 40
•
RLP
ACTIVE CONSTITUENTS: 674-692 giL COPPER(Cu) present as CUPROUS OXIDE.
Approved
SOLVENT 231-287 giL XYLENE
59-65 giL HYDROCARBONS LIQUID AROMA
TIC
SELF-POLISHING TIN-FREE ANTIFOULING
.___C_O_N_T_E_N_T_S_:(_L_)
__
c_o_L_o_u_R_
t
_B_L_A_c_K_
,
_~_
\V'..
_
·
e..
____,
1
I
?-~
PAINT
Packaging Group III
UNI263
Hazchem 3[Y]
Hazard Class 3
FLAMMABLE
THINNER
is
JOTUN No 7
Product Code OBD099EVA
Batch No: VC 22200100
APVMA APPROVAL NUMBER 46489/53984
Infopest
Verified
ANTIFOULING SEA
VICTOR
40
DIRECTIONS
FOR
USE
-ALL
STATES
ANTIFOULING SEA VICTOR 40
is
used to control general marine fouling on commercial and naval
vessels constructed
fi·om
Steel, Fibreglass
&
Timbe
r.
SURFACE PREPARATION: ANTIFOULING SEA
VICTOR 40
is
applied over an anti-corrosive
coating (such as VINYGUARD SILVERGREY 88) or existing ANTIFOULING SEA
VICTOR 40
which has been high pressure water washed and allowed to dry
thoroughly.
MIXING: Thoroughly power mix before use
THINNING: Thin up to 15% with THINNER No. 7
APPLICATION METHOD: Spray
is
preferred, brush/roller are acceptable but extra coats may be
required to achieve the correct thickness.
COVERAGE: Theoretical coverage
is
5.0 m
2
/L per coat.
DRY FILM THICKNESS: Recommend at
IOOJ.!m
per coat.
Normally 2 coats are required. Contact Jotun for specific advice.
PROVIDE ADEQUATE VENTILATION DURING APPLICATION
DRYING TIMES
:@
23°C: Allow minimum
of8
hours between coats.
TIME BEFORE LAUNCHING: (@ 23°C): Allow min. 8 hours and max. 48
hours.
Consult Product Data Sheet for detailed information.
NOT
TO
BE USED FOR ANY PURPOSE,
OR
IN ANY MANNER, CONTRARY
TO
THIS
LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
PRECAUTION
PROTECTION
OF
WILDLIFE, FISH, CRUSTACEA
&
ENVIRONMENT
This product contains active materials which can have detrimental
effects on marine life

Tabia za bidhaa

Antifouling Seavictor 40
IDENTIFICATION OF THE MATERIAL AND SUPPLIER
MATERIAL SAFETY DATA SHEET
PRODUCT NAME
ANTIFOULING SEAVICTOR 40
1 .
:
MM00000375
SAFETY PHRASES
:
AREA OF APPLICATION
Industrial applications, Used by spraying.
MATERIAL USES
Solvent-borne.
:
:
EMERGENCY TELEPHONE
NUMBER
:
Medical Emergencies 24 hours: Poisons Information Centre (Australia)
131 126
SUPPLIER/MANUFACTURER
:
Jotun Australia
9 Cawley Road
Brooklyn 3012
Australia
Telephone + 61 39314 0722
Fax + 61 39314 0423
[e-mail]
HAZARDS IDENTIFICATION
2 .
SAFETY PHRASES
S23- Do not breathe vapour / spray.
S36/37- Wear suitable protective clothing and gloves.
S38- In case of insufficient ventilation, wear suitable respiratory
equipment.
S61- Avoid release to the environment. Refer to special
instructions/safety data sheet.
:
CLASSIFICATION
R10
Xn; R20/21/22
R43
N; R50/53
:
RISK PHRASES
R10- Flammable.
R20/21/22- Harmful by inhalation, in contact with skin and if
swallowed.
R43- May cause sensitisation by skin contact.
R50/53- Very toxic to aquatic organisms, may cause long-term adverse
effects in the
aquatic environment.
:
STATEMENT OF
HAZARDOUS/DANGEROUS NATURE
:
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
The preparation is classified in accordance with NOHSC as follows:
MIXTURE
INGREDIENT NAME
CAS NUMBER
CONCENTRATION
dicopper oxide
1317-39-1
25 - 50
Xn; R22
N; R50/53
xylene
1330-20-7
10 - 25
R10
Xn; R20/21
Xi; R38
zinc oxide
1314-13-2
10 - 25
N; R50/53
colophony
8050-09-7
2.5 - 10
R43
ethylbenzene
100-41-4
2.5 - 10
F; R11
Xn; R20
Solvent naphtha (petroleum), light aromatic
64742-95-6
2.5 - 10
R10
Xn; R20, R65
Xi; R37
R66
N; R51/53
tricresylphosphate
1330-78-5
2.5 - 10
Xn; R21/22
N; R51/53
1-methoxy-2-propanol
107-98-2
1 - 2.5
R10
:
Yes.
COMPOSITION/INFORMATION ON INGREDIENTS
3 .
CLASSIFICATION
SEE SECTION 16 FOR THE FULL TEXT OF THE R-PHRASES
DECLARED ABOVE
DATE OF ISSUE
PAGE: 1/8
:
17.03.2010.
_ANTIFOULING SEAVICTOR 40_
Other ingredients, determined not to be hazardous according to NOHSC
criteria, and not dangerous according to the
ADG C