Држава: Аустралија
Језик: Енглески
Извор: APVMA (Australian Pesticides and Veterinary Medicines Authority)
COPPER PRESENT AS CUPROUS OXIDE; COPPER PYRITHIONE; LIQUID HYDROCARBON; XYLENE
Chugoku Paints B.V.
PAINT
COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 480.0 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 51.9 g/L; LIQUID HYDROCARBON SOLVENT Other 122.0 g/L; XYLENE SOLVENT Other 335.0 g/L
0.75, 2.5 and 5 L
A - Agricultural
ANTIFOULING
Poison schedule: 6; Withholding period: ; Host/pest details: SHIP: [FOULING - FOR ANTIFOULING ON BOATS]
Registered
2023-07-01
Seajet 039 Platinum Mono-Component Antifouling 89111/123644 Product Name: APVMA Approval No: Label Name: Seajet 039 Platinum Mono-Component Antifouling Signal Headings: POISON KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING PRODUCT AND PRODUCT VAPOUR ARE FLAMMABLE KEEP AWAY FROM HEAT, SPARKS AND NAKED FLAMES Constituent Statements: ACTIVE CONSTITUENTS 480.0 g/L COPPER AS CUPROUS OXIDE 51.9 g/L COPPER PYRITHIONE SOLVENTS 335 g/L XYLENE 122 g/L LIQUID HYDROCARBONS Statement of Claims: A tin-free self-polishing antifouling paint suited to coastal environments and ideal for application to yachts and boats in high fouling areas. Net Contents: 0.75 L , 2.5 L , 5 L RLP APPROVED Restraints: Directions for Use: DIRECTIONS FOR USE- SEAJET 039 PLATINUM MONO-COMPONENT ANTIFOULING is a tin-free, self-polishing antifouling suitable for coastal marine environments, and recommended for yachts and motor boats in high fouling areas. Recommended use: For technical particulars refer to product data sheet available from Chugoku Paints. Surface preparation: High pressure wash (+200 bar) to remove any fouling and salt. Existing antifouling in good condition: check the SEAJET compatibility table before applying. Existing antifouling in poor condition: remove antifouling. Antifouling should only be wet sanded or chemically stripped. Never burn-off or dry sand old antifouling. New application: GRP/Steel: first apply SEAJET 015 or SEAJET 117. Wood: first apply SEAJET 015. Aluminium: DO NOT USE SEAJET 039 PLATINUM MONO-COMPONENT ANTIFOULING on aluminium surfaces. Preferable preceding coating SEAJET 015 UNDERWATER PRIMER. When applying direct to SEAJET 117, apply within 48 hours. Application conditions: Ensure the surface is dry and free of contamination such as salt, grease or oil. Degrease if required. Min. temperature: -5oC. Max humidity: 85% R.H. Application details: Recommended film thickness, wet, 114 μm; dry, 50 μm Spreading rate (theoretical): 8.8 m2/L Apply two coats. Apply an extra coat on leading edg Прочитајте комплетан документ