INTERNATIONAL BIOLUX NEW TECHNOLOGY MICRON EXTRA HIGH STRENGTH SELF POLISHING ANTIFOULING

Држава: Аустралија

Језик: Енглески

Извор: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Активни састојак:

COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; DICHLOFLUANID; DICHLOFLUANID; DICHLOFLUANID; DICHLOFLUANID

Доступно од:

AKZO NOBEL PTY LIMITED

INN (Међународно име):

Cu as cuprous oxide(602.6-769g/L)+dichlofluanid(13-16.6g/L)

Фармацеутски облик:

PAINT

Састав:

COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 759.4 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 602.6 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 737.9 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 768.8 g/L; DICHLOFLUANID SULFANYL Active 16.4 g/L; DICHLOFLUANID SULFANYL Active 13.0 g/L; DICHLOFLUANID SULFANYL Active 15.9 g/L; DICHLOFLUANID SULFANYL Active 16.6 g/L

Јединице у пакету:

10L; 4L

Класа:

A - Agricultural

Произведен од:

AKZO NOBEL

Терапеутска група:

BOAT - EXTERIOR (ANTIFOULING)

Терапеутска област:

ANTIFOULING

Терапеутске индикације:

MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS

Резиме производа:

Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE GROWTH]; Use as an antifouling paint to control marine growth below the waterline on pleasure craft.DO NOT use on aluminium/alloy or zinc sprayed surfaces

Статус ауторизације:

Stopped

Датум одобрења:

2019-06-30

Информативни летак

MICRON EXTRA
is a high strength antifouling,
incorporating Biolux technology, that offers
protection in most fouling conditions. Self polishing
technology ensures a continuous renewal of the
active layer of the paint which results in a hull that
stays cleaner for longer and without a heavy build
up of old paint.
RESTRAINT: DO NOT USE ON ALUMINIUM/ALLOY OR ZINC
SPRAYED SURFACES.
MAY BE APPLIED OVER:
Yacht Primer, Primocon,
Interprotect, and most types of antifoulings
provided they are in sound condition.
CAN BE OVERCOATED WITH:
Itself and selected other
antifoulings.
NEW SURFACES: TIMBER:
Surfaces must be clean, dry
and well sanded. Prime with either Yacht Primer
or Primocon (single pack options) or Interprotect
(two pack option).
EPOXY SHEATHED TIMBER/EPOXY COMPOSITE/POLYESTER GRP:
Ensure all traces of release agent and/or amine
bloom are removed from the surfaces using
Surface-Prep. Sand to remove gloss. Prime with
Interprotect.
STEEL:
Grit blast to Australian Standard 1627.4 Class
2.5-3 or angle grind to bright shiny steel. Prime with
Interprotect (2 pack) or Primocon (Single pack).
ALUMINIUM:
Do not use this product.
IMPORTANT NOTES:
Refer to primer labels for details of
primer application. Refer to filler labels and/or
literature for any filling and fairing information
required.
PROPS AND SHAFTS:
Longlife or Interspeed 2000 are
recommended, refer label data.
PREVIOUSLY ANTIFOULED SURFACES:
Check existing
antifouling may be overcoated with this product.
Desalinate by fresh water wash down. Follow by
wet sanding with typically 150-180 grit if the surface
is in sound condition or typically 80 grit if it is in poor
condition. When the surface is free of old
slime/fouling build up, any loose and flaking coatings
and any other contamination, allow to dry thoroughly.
Patch prime any bare areas as for new work above
and then apply new antifouling. On old antifouling in
good condition but of unknown type, seal with one
brushed coat of Primocon, after washing and
sanding down
VESSELS OF SUITABLE CONSTRUCTION BUT INC

Карактеристике производа

AKZO NOBEL YACHT COATINGS 
MATERIAL SAFETY DATA SHEET 
YBA904
MICRON EXTRA DOVER WHITE
VERSION NUMBER 5    REVISION DATE 10/13/11 
1. Product and company identification 
Hazardous according to criteria of Safework Australia. 
Classified as a Dangerous Good for transport according to the
ADG code (7th edition).
Product Name
MICRON EXTRA DOVER WHITE

Product Code
YBA904

Intended use
This product is intended for use in the 
Marine and Protective Coatings markets.
Refer Technical Data Sheet.

Application Method
Apply by brush and roller for small areas. 
Airless spray for large areas.
Refer Technical Data Sheet. 

Company Name
Akzo Nobel Yacht Coatings
Unit E54, 76 Waterway Drive
Coomera
Queensland 4209
Australia
Telephone No.
[phone]
Fax No.
[phone]
24 hour Emergency Telephone No.
1800 680 071
For Poisons Advice telephone 
131 126 For Advice to Doctors & Hospitals only
2. Hazard Identification 
R50/53 - Very toxic to aquatic
organisms, may cause long-term adverse effects in the aquatic 
environment.
R62 - Possible risk of impaired fertility.
R63 - Possible risk of harm to the unborn child.
R10 - Flammable.
R20/22 - Harmful by inhalation and if swallowed.
R41 - Risk of serious damage to eyes.
R43 - May cause sensitisation by skin contact.
R65 - Harmful: May cause lung damage if swallowed.
S2 - Keep out of the reach of children.
S9 - Keep container in a well-ventilated place.
S16 - Keep away from sources of ignition - No Smoking.
S23 - Do not breathe vapour/spray.
S26 - In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and
eye/face protection.
S46
- If swallowed, seek medical advice immediately and show this container or label.
S51 - Use only in well-ventilated areas.

Poison Schedule: S6 Si