HEMPELS ANTIFOULING MILLE DYNAMIC ALU 7160A

Država: Avstralija

Jezik: angleščina

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Kupite ga zdaj

Navodilo za uporabo Navodilo za uporabo (PIL)
19-06-2017
Lastnosti izdelka Lastnosti izdelka (SPC)
19-06-2017

Aktivna sestavina:

COPPER PRESENT AS CUPROUS THIOCYANATE; DIURON; DIURON

Dostopno od:

HEMPEL (AUSTRALIA) PTY LTD

INN (mednarodno ime):

Cu as CuCNS(132-143g/L)+diuron(64-68g/L)

Farmacevtska oblika:

PAINT

Sestava:

COPPER PRESENT AS CUPROUS THIOCYANATE CYANIDE Active 127.6 g/L; DIURON UREA-SUBSTITUTED Active 62.1 g/L; DIURON UREA-SUBSTITUTED Active 63.2 g/L

Enote v paketu:

1L; 20L; 5L

Razred:

A - Agricultural

Izdeluje:

HEMPEL

Terapevtska skupina:

BOAT - EXTERIOR (ANTIFOULING)

Terapevtsko območje:

ANTIFOULING

Terapevtske indikacije:

FOULING - FOR ANTIFOULING ON BOATS

Povzetek izdelek:

Poison schedule: 5; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 5; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; A polishing antifouling controlling marine growth on aluminium vessels.

Status dovoljenje:

Stopped

Datum dovoljenje:

2022-07-01

Navodilo za uporabo

                                Page 1 of 2
HEMPEL (AUSTRALIA) PTY LTD
HEMPEL'S ANTIFOULING MILLE DYNAMIC ALU 7160A
46918/101121
COMPANY NAME:
PRODUCT NAME:
APVMA APPROVAL NO:
LABEL NAME:
HEMPEL'S ANTIFOULING MILLE DYNAMIC ALU 7160A
SIGNAL HEADINGS:
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
CONSTITUENT
STATEMENTS:
Blue:
Active Constituent: 127.6 Copper present as Cuprous thiocyanate, 62.1
g/L DIURON
Black:
Active Constituent: 127.6 Copper present as Cuprous thiocyanate, 63.2
g/L DIURON
STATEMENT OF
CLAIMS:
A polishing antifouling to control marine growth on aluminium vessels
NET CONTENTS:
1L
5L
20L
DIRECTIONS FOR USE:
DIRECTIONS FOR USE-
Hempel’s ANTIFOULING MILLE DYNAMIC ALU 7160A is a TIN FREE
self-polishing
antifouling.
STIR WELL BEFORE AND DURING USE
Recommended use: Each coat may be applied at 40 micron dry film (65
micron wet film)
and usually 2 coats are required to protect the vessel during a 12
month period. First coat
of Hempel’s Antifouling Mille Dynamic ALU may be applied on top of
Underwater Primer
26030 (as a sealer coat) or according to specification.
Hempel’s Antifouling Mille Dynamic ALU may usually be applied
“directly” on top of other
self-polishing based antifoulings, subject to confirmation from the
manufacturer.
At 40 micron dry film the theoretical consumption is 15m2 per litre.
Thinner: THINNER 808, maximum 5% when airless spraying.
Application conditions: The surface should be completely clean and
dry. Application should
only take place in dry weather with temperatures above 5o C and the
temperature of the
surface should be above the dew point to avoid condensation.
Method of application: Airless spray gun, roller, brush. Use
respiratory protection. RLP APPROVED
Page 2 of 2
Launching: Allow a minimum of 18 hours after the last coat of paint
prior to launching (note:
Apply 2 coats, each at 40 micron dry film. Allow a minimum overcoating
interval of 8 hours
at 20o C between coats).
NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY TO THIS
LABEL UNLESS AUTHORISED UNDER AP
                                
                                Preberite celoten dokument
                                
                            

Lastnosti izdelka

                                1.1 PRODUCT IDENTIFIER
1.3 DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET
1.2 RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES
ADVISED AGAINST
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE
COMPANY/UNDERTAKING
HEMPEL'S MILLE DYNAMIC ALU 7160A
Conforms to Model Code of Practice - Preparation of Safety Data Sheets
for Hazardous Chemicals - Australia
Product identity :
7160A19990
Product type :
antifouling paint
Field of application :
yacht, ships and shipyards.
Identified uses :
Consumer applications, Industrial applications, Used by spraying.
Emergency telephone number (with hours of operation)
Company details :
Poisons Information Centre.
Tel.: 13 11 26 (24 hour)
Hempel (Australia) Pty Ltd
12 Fitzgerald Road
Laverton North, VIC 3026
Tel: (03) 8369 4900
Fax: (03) 9360 0894
Email: sales.au@hempel.com
Date of issue :
12 November 2015
No previous validation.
Date of previous issue :
HEMPEL'S MILLE DYNAMIC ALU 7160A
Product name :
1.4 EMERGENCY TELEPHONE NUMBER
SAFETY DATA SHEET
See Section 11 for more detailed information on health effects and
symptoms.
SECTION 2: HAZARDS IDENTIFICATION
2.1 CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
Product definition :
Mixture
2.2 LABEL ELEMENTS
HAZARDOUS SUBSTANCE. DANGEROUS GOODS.
GHS CLASSIFICATION
Hazard pictograms :
Signal word :
Hazard statements :
Prevention :
Precautionary statements :
Response :
Storage :
Disposal :
Warning
H226 - Flammable liquid and vapor.
H319 - Causes serious eye irritation.
H315 - Causes skin irritation.
H351 - Suspected of causing cancer.
H335 - May cause respiratory irritation.
H410 - Very toxic to aquatic life with long lasting effects.
Obtain special instructions before use. Avoid breathing vapors, spray
or mists. Wear protective gloves/
protective clothing/eye protection/face protection. Keep away from
heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and
easy to do. Continue rinsing. If skin ir
                                
                                Preberite celoten dokument