Материал стоматологический для фиксации:

Страна: Беларусь

Язык: русский

Источник: Министерством здравоохранения Республики (Центр экспертиз и испытаний в здравоохранении)

Доступна с:

GC Europe N.V., БЕЛЬГИЯ

класс:

изделия медицинского назначения

Производитель:

GC Europe N.V.

Дата Авторизация:

2021-10-07

Характеристики продукта

GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
GC FUJI PLUS
TM
ДЖИ СИ ФУДЖИ ПЛЮС
RADIOPAQUE REINFORCED GLASS IONOMER LUTING
CEMENT
For use only by a dental professional in the recommended
indications.
RECOMMENDED INDICATIONS
1. Cementation of metal-based inlays, onlays, crowns and bridges
2. Cementation of resin inlays, onlays, crowns and bridges
3. Cementation of all ceramic inlays
4. Cementation of high strength (zirconia based) all ceramic
crowns and bridges
5. Cementation of metal, ceramic and fiber posts
CONTRAINDICATIONS
1. Pulp capping.
2. Avoid use of this product in patients with known allergies to
glass ionomer cement, methacrylate monomer or methacrylate
polymer.
DIRECTIONS FOR USE
1. TOOTH PREPARATION
a) Prepare tooth in usual manner. For pulp capping, use calcium
hydroxide.
b) Clean the prepared tooth with pumice and water.
Note:
Use GC Fuji PLUS CONDITIONER on the prepared tooth
surface for 20 seconds for optimal adhesion.
c) Rinse thoroughly with water. Remove excess moisture by
blotting with a cotton pellet or gently blowing with an oil-free
air. DO NOT DESICCATE. Prepared surfaces should appear
moist (glistening).
2. RESTORATION PREPARATION
Make sure that the restoration is pretreated and handled
according to the manufacturer’s instructions.
3. POWDER AND LIQUID DISPENSING
a) The standard powder to liquid ratio is 2.0 g / 1.0 g. (1 level
large scoop of powder to 3 drops of liquid, or 1 level small
scoop of powder to 1 drop of liquid).
b) For accurate dispensing of powder, lightly tap the bottle
against the hand. Do not shake or invert.
c) Hold the liquid bottle vertically and squeeze gently.
d) Close bottles immediately after use.
4. MIXING
Dispense powder and liquid onto the pad. Using the plastic
spatula, add all the powder to the liquid. Mix rapidly for 20
seconds.
Note:
When mixing larger amounts, divide the powder into 2 equal
parts. Mix the first portion with all of the liquid for 15 seconds.
Incorporate the re