Инструменты медицинские хирургические: картриджи:

Страна: Беларусь

Язык: русский

Источник: Министерством здравоохранения Республики (Центр экспертиз и испытаний в здравоохранении)

Доступна с:

Covidien LLC, СОЕДИНЕННЫЕ ШТАТЫ АМЕРИКИ

класс:

изделия медицинского назначения

Производитель:

Covidien LLC

Дата Авторизация:

2022-12-05

Характеристики продукта

BEFORE USING PRODUCT, READ THE FOLLOWING INFORMATION THOROUGHLY.
IMPORTANT!
This booklet is designed to assist in using this product. It is not a
reference to surgical techniques.
This device was designed, tested and manufactured for single-patient
use only. Reuse or reprocessing of this device may
lead to its failure and subsequent patient injury. Reprocessing and/or
resterilization of this device may create the risk of
contamination and patient infection. Do not reuse, reprocess or
resterilize this device.
DESCRIPTION
The GIA™ stapler with Tri-Staple™ technology places two triple
staggered rows of titanium staples and simultaneously cuts
and divides tissue between these two triple rows. The GIA™ stapler
and cartridges with Tri-Staple™ technology are currently
available in 60 mm and 80 mm length.
The GIA™ stapler with Tri-Staple™ technology is currently
available in two staple sizes to accommodate various tissue
thicknesses: medium/thick and extra thick.
Staplers with medium/thick staple size (purple) deploy three
height-progressive rows of 3.0 mm, 3.5 mm and 4.0 mm
titanium staples. Staplers with extra thick staple size (black) deploy
three height progressive rows of 4.0 mm, 4.5 mm and
5.0 mm titanium staples. Please refer to the “SPECIFICATION CHART”
for availability of staple sizes and cartridge lengths.
Each GIA™ stapler with Tri-Staple™ technology may be reloaded up
to 7 times for a total of 8 firings per instrument.
INDICATIONS
The GIA™ stapler with Tri-Staple™ technology has applications in
abdominal and thoracic surgical procedures for resection,
transection and creation of anastomosis.
CONTRAINDICATIONS
1.
The instrument should not be used on tissue such as liver or spleen
where compressibility is such that closure of the
instrument would be destructive.
2.
Tissue thickness should be carefully evaluated before firing any
stapler. Refer to “SPECIFICATION CHART” and the “Tissue
Compression Requirements” section.
3.
“Tissue Compression Requirement” refers to the tissue c