INTERSMOOTH 460 SPC ANTIFOULING

País: Austrália

Língua: inglês

Origem: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Ingredientes ativos:

CUPROUS OXIDE | ZINC PYRITHIONE

Disponível em:

AKZO NOBEL PTY LIMITED

Classe:

AgChem

Grupo terapêutico:

COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS | FIBREGLASS HULL | STEEL HULL | TIMBER HULL

Área terapêutica:

ANTIFOULING

Indicações terapêuticas:

FOULING - FOR ANTIFOULING ON BOATS | MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS

Status de autorização:

Registered

Data de autorização:

2003-09-16

Folheto informativo - Bula

APPROVED 
LABEL 

Info

PEST

Verified
 

Características técnicas

High performance, TBT free, self polishing copolymer (SPC) antifouling
system with patented Copper Acrylate technology.
PRODUCT DESCRIPTION
Specifically designed for Deep Sea Vessels.
For use at Maintenance & Repair.
INTENDED USES
BEA461-Black, BEA462-Blue, BEA468-Dark Brown, BEA469-Dark Red
40% ±2% (ISO 3233:1998)
125 microns dry (313 microns wet)
3.20 m²/litre at 125 microns dft, allow appropriate loss factors
Airless Spray, Brush, Roller
PRODUCT INFORMATION
VOLUME SOLIDS
TYPICAL FILM THICKNESS
THEORETICAL COVERAGE
METHOD OF APPLICATION
FINISH/SHEEN
Not applicable
PART B (CURING AGENT)
Not applicable
MIX RATIO
Not applicable
FLASH POINT
Single Pack 22°C (Product produced and supplied in North America has
a flashpoint of 
21°C due to locally sourced solvents. There is no detrimental effect
on product 
performance.)
INDUCTION PERIOD
Not applicable
OVERCOATING DATA - SEE LIMITATIONS
SUBSTRATE TEMPERATURE
COLOUR
DRYING INFORMATION 
-5°C
5°C
25°C
35°C
 Touch Dry [ISO 1517:73]
2 hrs
60 mins
40 mins
30 mins
 Before Flooding 0-36 Month Schemes
30 hrs
20 hrs
16 hrs
10 hrs
 Before Flooding 48-60 Month Schemes
48 hrs
36 hrs
24 hrs
OVERCOATED BY 
-5°C
5°C
25°C
35°C
Min
Max
Min
Max
Min
Max
Min
Max
For 48-60 month schemes the times before flooding can revert to the
times for 0-36 month schemes if:
1) the antifouling scheme is less than 375µm dft in total or
2) the vessel service speed is less than 15 knots
3) for applications at -5°C only 2 coat schemes should be specified.
 It is not recommended that 3 or 4 coat schemes are applied at this 
temperature.
Consult your International Paint representative for specific
recommendations.
NOTE
Intersmooth 460 SPC
0-36 Month Schemes
12 hrs
28 days
6 hrs
28 days
4 hrs
28 days
3 hrs
28 days
Intersmooth 460 SPC
48-60 Month Schemes
 -
 -
18 hrs
28 days
12 hrs
28 days
9 hrs
28 days
REGULATORY DATA
VOC
NOTE: VOC values are typical and are provided for guidance purposes
only. These may be subject to variation depending on 
factors such as differences in colour and