Country: Belarus
Bahasa: Rusia
Sumber: Министерством здравоохранения Республики (Центр экспертиз и испытаний в здравоохранении)
Ormco Corporation, СОЕДИНЕННЫЕ ШТАТЫ АМЕРИКИ
изделия медицинского назначения
Ormco Corporation
2021-01-05
INSTRUCTIONS FOR USE 1 BLŪGLOO ™ TWO-WAY COLOR-CHANGE ADHESIVE FOR AESTHETIC BRACKETS INSTRUCTIONS FOR USE_ _ ENGLISH BLŪGLOO ™ is a two-way color-change adhesive for aesthetic brackets. BLŪGLOO contains a temperature-sensitive blue dye that becomes clear when it approaches body temperature and reverts to a blue color when it falls below body temperature. The blue tint makes any excess or remaining adhesive easier to see when bonding and debonding. TOOTH PREPARATION x Place lip/cheek retractor and saliva ejector in the mouth. x Apply etching solution to the bonding surfaces with applicator sponges. Dab gently and continuously for 30 seconds per tooth (one arch at a time) – do not rub. Rinse thoroughly for a minimum of 5 seconds per tooth with a forceful airway spray and suction using a high-speed evacuator. Maintain a dry field. Do not allow moisture, saliva or mucosal tissue to contact the etched enamel. x Dry the etched enamel with clean, dry air. Inspect to ensure a uniform, dull frosty appearance. BONDING PROCEDURE x Dispense small amount of Ortho Solo ™ sealant on the mixing pad. Replace the cap immediately after dispensing. Apply very thin, uniform coat of Ortho Solo to prepared enamel surface using the brushes provided. x Extrude small amount of BLŪGLOO adhesive paste onto the base of the bracket pad. After application, clean the tip and replace the cap. x Place bracket onto the tooth surface immediately after applying the adhesive. x Position bracket, and press down firmly. A slight excess of BLŪGLOO (blue tint) should be visible around the periphery of the bracket. x Remove excess adhesive from the bracket base periphery. (The blue color will disappear when the adhesive reaches body temperature.) x With conventional light-curing units (i.e. Optilux 501), light-cure the adhesive for 10-15 seconds for clear and 20 seconds for metal brackets. Light-cure clear brackets by shining the light directly through the bracket. Light-cure metal brackets by shining the light from as many directions as pos Baca dokumen lengkap