Valsts: Austrālija
Valoda: angļu
Klimata pārmaiņas: APVMA (Australian Pesticides and Veterinary Medicines Authority)
COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; LIQUID HYDROCARBON; LIQUID HYDROCARBON; LIQUID HYDROCARBON
WAGON PAINTS AUSTRALIA PTY LTD
PAINT
COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 407.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 416.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 417.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 413.0 g/L; LIQUID HYDROCARBON SOLVENT Other 385.0 g/L; LIQUID HYDROCARBON SOLVENT Other 379.0 g/L; LIQUID HYDROCARBON SOLVENT Other 388.0 g/L
10L; 1L; 20L; 5L
A - Agricultural
ANTIFOULING
Poison schedule: 5; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE FOULING]; BOAT HULL (REFER TO LABEL): [MARINE FOULING]
Registered
2023-07-01
Transocean Optima Antifouling 2.32 84506/131928 Product Name: APVMA Approval No: Label Name: Transocean Optima Antifouling 2.32 Signal Headings: CAUTION KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING Constituent Statements: RED-BROWN ACTIVE CONSTITUENT: 417 g/L COPPER PRESENT AS CUPROUS OXIDE SOLVENT: 388 g/L LIQUID HYDROCARBONS PINK ACTIVE CONSTITUENT: 416 g/L COPPER PRESENT AS CUPROUS OXIDE SOLVENT: 388 g/L LIQUID HYDROCARBONS BLUE ACTIVE CONSTITUENT: 413 g/L COPPER PRESENT AS CUPROUS OXIDE SOLVENT: 385 g/L LIQUID HYDROCARBONS BLACK ACTIVE CONSTITUENT: 407 g/L COPPER PRESENT AS CUPROUS OXIDE SOLVENT: 379 g/L LIQUID HYDROCARBONS Statement of Claims: A tin-free, conventional antifouling for the control of marine growth below the waterline on vessels Net Contents: 1L 5L 10L 20L RLP APPROVED Restraints: Directions for Use: Stir well before use. Application: May be applied by airless spray, brush or roller. Recommended dry film thickness per coat 75 μm (range 50 - 75 μm), wet film thickness 130 μm (range 90 – 130 μm). Theoretical spreading rate 7.6 m2/l at 130 μm dft. When applying by brush or roller, multicoats may be needed to achieve the specified dry film thickness. For technical details, refer to product data sheet available from Wagon Paints (address at bottom of this label) Thinner: Transocean Standard Thinner 6.01, maximum 3% for airless spray, 5% for brush/ roller. Surface Preparation: The product can be applied on all Transocean anticorrosive systems. For system repair/recoat, all surfaces should be clean, dry and free from contamination. Contact your local Transocean representative for advice and a full specification. Application conditions: Refer to product data sheet. Drying and recoating times: At 23oC substrate temperature, touch dry 1 hour, dry to recoat minimum 6 hours, maximum 5 days. Refer to product data sheet for further detail and other temperatures. Undocking: As soon as possible after application of the final layer, but no sooner than the minimum drying ti Izlasiet visu dokumentu