Valsts: Austrālija
Valoda: angļu
Klimata pārmaiņas: APVMA (Australian Pesticides and Veterinary Medicines Authority)
COPPER PRESENT AS CUPROUS OXIDE; COPPER PYRITHIONE; LIQUID HYDROCARBON; XYLENE
JOTUN AUSTRALIA PTY LTD
Cu as cuprous oxide(690-697g/L)+copper pyrithione(65g/L)
PAINT
COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 687.0 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 72.5 g/L; LIQUID HYDROCARBON SOLVENT Other 146.7 g/L; XYLENE SOLVENT Other 273.0 g/L
10L; 20L; 5L
A - Agricultural
COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS | FIBREGLASS HULL | STEEL HULL | TIMBER HULL
ANTIFOULING
MARINE FOULING
Poison schedule: 5; Withholding period: WHP: N/A; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE FOULING]; Poison schedule: 5; Withholding period: ; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE FOULING]; To control general marine fouling on vessels constructed from steel, fibreglass & timber.Not recommended for use on high speed vessels. Not recommended for use on high-wash areas such as propellers and bow thrusters. Not recommended for use on aluminium vessels unless an effective anti-corrosive primer is used.
Registered
2023-07-01
ANTIFOULING SEAQUANTUM ULTRA III 64505/138169 Product Name: APVMA A pproval No: Label Name: ANTIFOULING SEAQUANTUM ULTRA III Signal Headings: POISON KEEP OUT OF REACH OF CHILDREN READ SAFETY DIRECTIONS BEFORE OPENING OR USING Constituent Statements: ACTIVE CONSTITUENTS 687 g/L COPPER PRESENT AS CUPROUS OXIDE 72.5 g/L COPPER PYRITHIONE SOLVENTS 273 g/L XYLENE 146.7 g/L LIQUID HYDROCARBONS Statement of Claims: A tin-free self-polishing antifouling paint for the control of marine growth below the waterline on vessels Net Contents: 5L 10L 20L Directions for Use: ANTIFOULING SEAQUANTUM ULTRA III is used to control general marine fouling on vessels constructed from Steel, Fibreglass & Timber. Recommended for use on aluminium vessels ONLY WHEN an effective anti-corrosive primer is used. Not recommended for use on high speed vessels. Not for use on high-wash areas such as propellers and bow thrusters. SURFACE PREPARATION: ANTIFOULING SEAQUANTUM ULTRA III is applied over an anti-corrosive coating (such as SAFEGUARD UNIVERSAL ES) or existing ANTIFOULING SEAQUANTUM ULTRA III which has been high pressure water washed and allowed to dry thoroughly. MIXING: Thoroughly power mix before use. THINNING: Thin up to 15% with THINNER No. 7 Re -entry : RE-ENTRY STATEMENT Do not enter treated areas until the spray has dried, unless wearing cotton overalls buttoned to the neck and wrist (or equivalent clothing) and chemical resistant gloves. Clothing must be laundered after each day's use. RLP APPROVED APPLICATION METHOD: Spray is preferred, brush/roller are acceptable but extra coats may be required to achieve the correct thickness. COVERAGE: Theoretical coverage is 4.3 m²/L per coat. DRY FILM THICKNESS: Recommended at 125 μm per coat. Normally 2 – 3 coats are required. Contact Jotun for specific advice. DRYING TIME @ 23°C. Allow minimum of 7 hours between coats. TIME BEFORE LAUNCHING @ 23°C: Allow min. 7 hours and max. 48 hours. Consult Product Data Sheet for detailed information. NOT TO BE USED FOR ANY OTHER PURPOSE OR IN ANY M Izlasiet visu dokumentu
SeaQuantum Ultra S IDENTIFICATION OF THE MATERIAL AND SUPPLIER MATERIAL SAFETY DATA SHEET PRODUCT NAME SEAQUANTUM ULTRA S 1 . : AREA OF APPLICATION Industrial applications, Used by spraying. MATERIAL USES Antifouling. Solvent-borne. : : EMERGENCY TELEPHONE NUMBER : Medical Emergencies 24 hours: Poisons Information Centre (Australia) 131 126 SUPPLIER/MANUFACTURER : Jotun Australia 9 Cawley Road Brooklyn 3012 Australia Telephone + 61 39314 0722 Fax + 61 39314 0423 SDSJotun@jotun.com LABEL NO. : 20760 HAZARDS IDENTIFICATION 2 . SAFETY PHRASES S23- Do not breathe vapour / spray. S36/37- Wear suitable protective clothing and gloves. S38- In case of insufficient ventilation, wear suitable respiratory equipment. S45- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S61- Avoid release to the environment. Refer to special instructions/safety data sheet. : CLASSIFICATION R10 T; R23 Xn; R21/22 Xi; R38 R43 N; R50/53 : RISK PHRASES R10- Flammable. R23- Toxic by inhalation. R21/22- Harmful in contact with skin and if swallowed. R38- Irritating to skin. R43- May cause sensitisation by skin contact. R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. : STATEMENT OF HAZARDOUS/DANGEROUS NATURE : HAZARDOUS SUBSTANCE. DANGEROUS GOODS. The preparation is classified in accordance with NOHSC as follows: MIXTURE INGREDIENT NAME CAS NUMBER % BY WEIGHT dicopper oxide 1317-39-1 25 - 50 Xn; R22 N; R50/53 xylene 1330-20-7 10 - 25 R10 Xn; R20/21 Xi; R38 colophony 8050-09-7 2.5 - 10 R43 Solvent naphtha (petroleum), light aromatic 64742-95-6 2.5 - 10 R10 Xn; R20, R65 Xi; R37 R66 N; R51/53 zinc oxide 1314-13-2 2.5 - 10 N; R50/53 bis(1-hydroxy-1h-pyridine-2-thionato-o,s)copper 14915-37-8 2.5 - 10 T+; R26 Xn; R22 : Yes. COMPOSITION/INFORMATION ON INGREDIENTS 3 . CLASSIFICATION DATE OF ISSUE PAGE: 1/8 : 16.10.2012. _SEAQUANTUM ULTRA S_ Xi; R41, R38 N; R50 ethylbenzene 100-41-4 2.5 - 10 F; R11 Xn; R20 Other ingredients, determined not Izlasiet visu dokumentu