Šalis: Kanada
kalba: prancūzų
Šaltinis: Health Canada
Chlorite de sodium; Acide lactique
LONDON DAIRY SUPPLY LTD
0.64%; 2.64%
Solution
Chlorite de sodium 0.64%; Acide lactique 2.64%
Topique
100
En vente libre
Bétails
Numéro de groupe d'ingrédients actifs (GIA) :0220524001
APPROUVÉ
2021-09-20
July 26, 2021 DLS-7 ACTIVATOR LACTIC ACID TEAT SOLUTION _(FOR USE ONLY WITH DLS-7 BASE) _ VETERINARY USE ONLY | PRE AND POST MILKING ANTISEPTIC TEAT SOLUTION INDICATIONS: DLS-7 is a pre and post-milking antiseptic teat solution to be used as an aid in reducing the spread of organisms which may cause mastitis in dairy cattle. ====================================================================================================================== ACTIVE INGREDIENTS: Lactic acid, 2.64% w/w EMOLLIENTS: Glycerin 9.00% w/w DIRECTIONS FOR USE: Measure equal volumes of DLS-7 base and DLS-7 activator into a clean container and mix until the color is uniform throughout . Do not dilute . Mix only enough product for one milking of the herd. Always use freshly mixed, full strength DLS- 7 . PRE-MILKING: Use at full strength. Do not dilute. Before milking, apply DLS-7 to each teat, ensuring complete coverage of all teats with the solution. After 15 to 30 seconds, dry each teat thoroughly. If the udder and teats are heavily soiled, clean with an antiseptic udder wash and dry thoroughly before application of DLS-7 . POST-MILKING: Use at full strength. Do not dilute. Apply DLS-7 to each teat immediately after milking. Ensure that the solution thoroughly covers the entire surface of all teats. Allow teats to dry. Do not wipe. If outside temperature is below 0⁰C, allow to air dry on the teats before turning cows out to cold weather to prevent freezing. When a cow is being dried off, continue the application of DLS-7 to all teats once daily for 1 to 2 weeks as required after the last milking. With freshening cows, resume application of DLS-7 to all teats twice daily for 7 to 10 days before calving. A fresh solution should always be used at each milking. The application equipment should be cleaned and rinsed properly after each milking session or when the solution becomes contaminated. Do not pour remaining solution back into the original container. Keep container closed to prevent contamination of the product . CAUTIONS: For external Perskaitykite visą dokumentą