Antifouling SeaForce Active

Država: Australija

Jezik: engleski

Izvor: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Aktivni sastojci:

ZINEB; ZINEB; ZINEB; ZINEB; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PRESENT AS CUPROUS OXIDE; COPPER PYRITHIONE; COPPER PYRITHIONE; COPPER PYRITHIONE; LIQUID HYDROCARBON; LIQUID HYDROCARBON; LIQUID HYDROCARBON; LIQUID HYDROCARBON

Dostupno od:

JOTUN AUSTRALIA PTY LTD

Farmaceutski oblik:

PAINT

Sastav:

ZINEB CARBAMATE-DITHIOCARBAMATE Active 77.1 g/L; ZINEB CARBAMATE-DITHIOCARBAMATE Active 77.7 g/L; ZINEB CARBAMATE-DITHIOCARBAMATE Active 78.0 g/L; ZINEB CARBAMATE-DITHIOCARBAMATE Active 78.3 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 378.8 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 383.8 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 380.0 g/L; COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 389.5 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 22.5 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 22.3 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 22.6 g/L; LIQUID HYDROCARBON SOLVENT Other 344.6 g/L; LIQUID HYDROCARBON SOLVENT Other 346.1 g/L; LIQUID HYDROCARBON SOLVENT Other 344.9 g/L; LIQUID HYDROCARBON SOLVENT Other 345.3 g/L

Jedinice u paketu:

5L / 10L / 20L

Razred:

A - Agricultural

Područje terapije:

ANTIFOULING

Proizvod sažetak:

Poison schedule: 6; Withholding period: N/A; Host/pest details: MARINE VESSELS BELOW THE WATERLINE: [MARINE GROWTH]

Status autorizacije:

Registered

Datum autorizacije:

2023-07-01

Uputa o lijeku

Product Name:
APVMA Approval No:
Antifouling SeaForce Active
91723/133264
Label Name:
Antifouling SeaForce Active
Signal Headings:
POISON
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING RLP APPROVED
Constituent
Statements:
SEAFORCE ACTIVE DARK RED
ACTIVE CONSTITUENTS:
22.6 g/L COPPER PYRITHIONE
380 g/L COPPER PRESENT AS CUPROUS OXIDE
78.0 g/L ZINEB
SOLVENTS:
346.1 g/L LIQUID HYDROCARBONS
SEAFORCE ACTIVE LIGHT RED
ACTIVE CONSTITUENTS:
22.5 g/L COPPER PYRITHIONE
378.8 g/L COPPER PRESENT AS CUPROUS OXIDE
77.7 g/L ZINEB
SOLVENTS:
344.9 g/L LIQUID HYDROCARBONS
SEAFORCE ACTIVE BLACK
ACTIVE CONSTITUENTS:
22.6 g/L COPPER PYRITHIONE
389.5 g/L COPPER PRESENT AS CUPROUS OXIDE
78.3 g/L ZINEB
SOLVENTS:
344.6 g/L LIQUID HYDROCARBONS
SEAFORCE ACTIVE BLUE
ACTIVE CONSTITUENTS:
22.3 g/L COPPER PYRITHIONE
383.8 g/L COPPER PRESENT AS CUPROUS OXIDE
77.1 g/L ZINEB
SOLVENTS:
345.3 g/L LIQUID HYDROCARBONS
Statement of Claims:
ANTIFOULING SEAFORCE ACTIVE is used for the control of marine growth
below the
water line on vessels
Net Contents:
5L, 10L, 20L
Restraints:
FOR PROFESSIONAL USE ONLY
Directions for Use:
DIRECTIONS FOR USE-
ANTIFOULING SEAFORCE ACTIVE is applied over an anti-corrosive coating
(such as
SAFEGUARD UNIVERSAL ES) or existing ANTIFOULING SEAFORCE ACTIVE which
has
been high pressure washed and allowed to dry thoroughly.
MIXING: thoroughly power mix before use.
THINNING: thin up to 15% with THINNER NO. 7
APPLICATION METHOD: spray is preferable, brush/roller are acceptable
but extra coats
may be required to achieve the correct thickness
COVERAGE: theoretical coverage is 5.5 m2/L per coat.
DRY FILM THICKNESS: recommended at 125 microns per coat. Normally 2 -
3 coats are
required. Contact Jotun for specific advice.
DRYING TIME at 23°C: allow minimum of 7 hours between coats.
TIME BEFORE LAUNCHING at 23°C: allow minimum 7 hours and maximum 48
hours,
Other Limitations:
NOT TO BE USED FOR ANY PURPOSE OR IN A MANNER CONTRARY TO THIS LABEL
UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION
General Instru