neoform D plus

País: Reino Unido

Idioma: inglés

Fuente: DrWeigert

Disponible desde:

Dr. Weigert

Ficha técnica

WWW.DRWEIGERT.COM
Surface disinfectant for medical
devices
Liquid concentrate
Fields of application:
•
For the cleaning and disinfection of bed-frames
and other washable medical devices in hospitals,
doctor´s practices and nursing homes.
•
Bactericidal and yeasticidal activity. Confirmed by
certification.
Special properties:
•
Good material compatibility.
•
Low odour.
•
Free of formaldehyde and phosphates.
Application and Dosage:
neoform D plus is used for the combined surface
cleaning and disinfection at room temperature via
wiping or mechanical cleaning equipment such as
rotating brushes or spray cleaners.
Depending on the desired activity dilute neoform D
plus according to the below mentioned concentration.
Wipe the surface to be cleaned and disinfected with
the working solution and adhere to the contact time.
After the expiry of the contact time rinse the surface
thoroughly with water of drinking quality.
General instructions for use:
•
For professional use only.
•
It is generally recommended to wear gloves when
using disinfectants manually.
•
For economical and controlled dosage manual
dosing and application ancillaries are available,
e.g. mixing equipment or dosing accessories.
Please contact us.
•
The neoform D plus working solution has to be
rinsed off with water (preferably deionised water).
•
Do not mix with other products.
neoform
®
D plus
Under dirty conditions
(pre-cleaned and not
pre-cleaned surfaces) 20 °C
Bactericidal /
yeasticidal
30 ml/l (3.0 %), 15 min
20 ml/l (2.0 %), 30 min
15 ml/l (1.5 %), 1h
5 ml/l (0.5 %), 4 h
Chemische Fabrik Dr. Weigert GmbH & Co. KG
Mühlenhagen 85 • D-20539 Hamburg
Tel.: [phone]
Fax: [phone]
info@drweigert. de
www. drweigert. de
Expert reports / listings:
The disinfecting activity has been confirmed by certifi-
cation. Expert reports are available on request.
Technical data:
pH-range
5.4 – 4.7 (5 - 30 ml/l, determined in
deionised water, 20 °C)
Viscosity
< 50 mPa s
Density
1,05 g/cm
3
(20 °C)
Ingredients:
Ingredients acc