INTERSMOOTH 7460HS SPC ANTIFOULING

Country: Australia

Language: English

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:

COPPER PRESENT AS CUPROUS OXIDE; COPPER PYRITHIONE

Available from:

AKZO NOBEL PTY LIMITED

INN (International Name):

Cu as cuprous oxide(794g/L)+copper pyrithione(84g/L)

Pharmaceutical form:

PAINT

Composition:

COPPER PRESENT AS CUPROUS OXIDE MINERAL-COPPER Active 794.0 g/L; COPPER PYRITHIONE MINERAL-COPPER Active 84.0 g/L

Units in package:

10L

Class:

A - Agricultural

Therapeutic area:

ANTIFOULING

Product summary:

Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE FOULING, MARINE GROWTH]; Use as an antifouling paint to control marine growth.Do not use on aluminium hulls. Do not use on pleasurecraft or other vessels that may be moored in marinas.

Authorization status:

Registered

Authorization date:

2023-07-01

Patient Information leaflet

Page 1 of 2
AKZO NOBEL PTY LIMITED
INTERSMOOTH 7460HS SPC ANTIFOULING
65261/108327
Company Name:
Product Name:
APVMA Approval No:
Label Name:
INTERSMOOTH 7370HS SPC ANTIFOULING
Signal Headings:
POISON
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Constituent
Statements:
794 g/L COPPER PRESENT AS CUPROUS OXIDE
84 g/L COPPER PYRITHIONE
Statement of Claims:
Use as an antifouling paint to control marine growth
Net Contents:
10L
Colours Red, Brown
Mix thoroughly before use
Directions for Use:
DIRECTION FOR USE: ALL STATES
RESTRAINTS: Do not use on Aluminium hulls.
DO NOT use on pleasurecraft or other vessels that may be moored in
marinas.
APPLICATION AT NEWBUILDING
The anticorrosive coating should be dry and free from all
contamination (oil, grease, salt,
etc.) and overcoated within a specific overcoating time.
APPLICATION AT MAINTENANCE DOCKING
The existing coatings should be dry and free of marine fouling and all
other contamination
(oil, grease, salt, etc.). Fresh water should be used for washing
down. Damaged and
corroded areas should be touched up with anticorrosive paint. If the
existing antifouling will
not provide a suitable substrate, a barrier coating of anticorrosive
should be applied before
overcoating with antifouling.
PRODUCT APPLICATION: Airless Spray at 4.8 square meters per litre.
AIRLESS SPRAY: Tip range 0.66-0.79mm (26-31 thou)
Total output pressure 2100kPa (210 kg/square centimeter).
THINNING: Not recommended, if necessary use up to 5% International
Thinner GTA007.
CLEAN UP: Use International Thinner GTA007.
Please refer to the detailed product data sheet for full instructions
on use.
Http://www.international-marine.com
NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS
LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION RLP APPROVED
Page 2 of 2
Other Limitations:
General Instructions:
Protections:
PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND THE ENVIRONMENT
Very toxic to aquatic life. During application of the coating, employ
methods designed
to prev

Summary of Product characteristics

AKZO NOBEL PTY LTD.
MATERIAL SAFETY DATA SHEET
BEA754 INTERSMOOTH 7460HS SPC BROWN
VERSION NUMBER 1 REVISION DATE 02/03/14
1. PRODUCT AND COMPANY IDENTIFICATION
Hazardous according to criteria of Australian WHS Regulations.
Classified as a Dangerous Good for transport according to the latest
ADG code.
1.1. PRODUCT IDENTIFIER
INTERSMOOTH 7460HS SPC BROWN
Product Code
BEA754
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES
ADVISED AGAINST
Intended use
Refer Technical Data Sheet.
For professional use only.
This product is intended for use in the Marine coatings market.
Application Method
Refer Technical Data Sheet.
Apply by brush and roller for small areas.
Airless spray for large areas.
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET
MANUFACTURER
Akzo Nobel Pty Ltd.
8 Kellaway Place
Wetherill Park
New South Wales
Australia, 2164
TELEPHONE NO.
[phone]
FAX NO.
[phone]
1.4. EMERGENCY TELEPHONE NUMBER
1800 680 071
FOR POISONS ADVICE TELEPHONE
131 126 For Advice to Doctors & Hospitals only
2. HAZARD IDENTIFICATION OF THE PRODUCT
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
Flam. Liq. 3;H226
Flammable liquid and vapour.
Acute Tox. 4;H302
Harmful if swallowed.
Acute Tox. 4;H312
Harmful in contact with skin.
Acute Tox. 4;H332
Harmful if inhaled.
Skin Irrit. 2;H315
Causes skin irritation.
Eye Dam. 1;H318
Causes serious eye damage.
Aquatic Chronic 1;H410
Very toxic to aquatic life with long lasting effects.
2.2. LABEL ELEMENTS
Using the Toxicity Data listed in section 11 & 12 the product is
labelled as follows.
DANGER
H226 Flammable liquid and vapour.
H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H410 Very toxic to aquatic life with long lasting effects.
AUH208 Contains polyamide dispersion . May produce an allergic
reaction.
Poison Schedule: S6 Signal word POISON
Precautionary Phrases (P) listed below:
[PREVENTION]:
P210 Keep away from heat / sparks / open flames / hot surfaces - No