INTERNATIONAL VC OFFSHORE RACING ANTIFOULING

Country: Australia

Language: English

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:

DIURON; XYLENE

Available from:

AKZO NOBEL PTY LIMITED

INN (International Name):

diuron(20g/L)+cuprous oxide(1000g/kg)

Pharmaceutical form:

PAINT

Composition:

DIURON UREA-SUBSTITUTED Active 20.0 g/L; XYLENE SOLVENT Other 600.0 g/L

Units in package:

2L; 800g

Class:

A - Agricultural

Manufactured by:

AKZO NOBEL

Therapeutic group:

BOAT - EXTERIOR (ANTIFOULING)

Therapeutic area:

ANTIFOULING

Therapeutic indications:

FOULING - FOR ANTIFOULING ON BOATS

Product summary:

Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Use as an antifouling paint to control marine growth below the waterline on vessels.Parts A & B NOT to be sold separately

Authorization status:

Stopped

Authorization date:

2022-07-01

Patient Information leaflet

2 litres
VC OFFSHORE
(when mixed with Part B)
WARNING
Use as an Antifouling Paint to control marine growth below the
waterline on vessels.
Parts A and B not to be sold seperately.
GREY
RACING ANTIFOULING
Part A
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING
YACHTPAINT.COM
APVMA Approval No.
49609/2L/0809
VC OFFSHORE
is a medium strength thin film antifouling, which has been
specifically formulated to reduce surface friction and drag thus
increasing boat speed. It is ideal for the perform ance
conscious racing
yachtperson or high speed powercraft owner.
RESTRAINT: DO NOT USE ON ALUMINIUM/ALLOY OR ZINC SPRAYED SURFACES.
MAY BE APPLIED OVER:
Yacht Primer, Interprotect, and most types of
hard antifoulings.
CAN BE OVERCOATED WITH:
Itself and selected other antifoulings.
NEW SURFACES:
TIMBER:
Surfaces must be clean, dry and well sanded. Prime with
either Yacht Primer (single pack ) or Interprotect (two pack ).
EPOXY SHEATHED TIMBER/EPOXY COMPOSITE/POLYESTER GRP:
Ensure all
traces of release agent and/or amine bloom are removed from the
surfaces using Surface Cleaner. Sand to remove gloss. Prime with
Interprotect.
STEEL:
Grit blast to Australian Standard 1627. 4 Class 2.5-3. Prime
with Interprotect.
ALUMINIUM:
Do not use this product.
PROPS AND SHAFTS:
Abrade surfaces well to a bright shiny finish. Apply
PA 10 primer (1-2 coats).
IMPORTANT NOTES:
Refer to primer labels for details of primer application.
Refer to filler labels and/or literature for any filling and fairing
information required.
PREPARATION: PREVIOUSLY ANTIFOULED SURFACES:
Check existing antifouling
may be overcoated with this product. Desalinate by fresh water wash
down. Follow by wet sanding with typically 150-180 grit if the surface
is in sound condition or typically 80 grit if it is in poor condition.
When
the surface is free of old slime/fouling build up, any loose and
flaking
coatings and any other contamination, allow to dry thoroughly. Patch
prime any bare areas as for new work above and then apply new
antifouling.
PREPAR

Summary of Product characteristics

AKZO NOBEL PTY LTD.
MATERIAL SAFETY DATA SHEET
YBA764 VC OFFSHORE GREY PART A
VERSION NUMBER 7 REVISION DATE 02/03/14
1. PRODUCT AND COMPANY IDENTIFICATION
Hazardous according to criteria of Australian WHS Regulations.
Classified as a Dangerous Good for transport according to the latest
ADG code.
1.1. PRODUCT IDENTIFIER
VC OFFSHORE GREY PART A
Product Code
YBA764
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES
ADVISED AGAINST
Intended use
Refer Technical Data Sheet.
For professional use only.
This product is intended for use in the Yacht market.
Application Method
Refer Technical Data Sheet.
Apply by brush and roller for small areas.
Airless spray for large areas.
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET
MANUFACTURER
Akzo Nobel Pty Ltd.
8 Kellaway Place
Wetherill Park
New South Wales
Australia, 2164
TELEPHONE NO.
[phone]
FAX NO.
[phone]
1.4. EMERGENCY TELEPHONE NUMBER
1800 680 071
FOR POISONS ADVICE TELEPHONE
131 126 For Advice to Doctors & Hospitals only
2. HAZARD IDENTIFICATION OF THE PRODUCT
2.1. CLASSIFICATION OF THE SUBSTANCE OR MIXTURE
Flam. Liq. 3;H226
Flammable liquid and vapour.
Acute Tox. 4;H312
Harmful in contact with skin.
Acute Tox. 4;H332
Harmful if inhaled.
Skin Irrit. 2;H315
Causes skin irritation.
Skin Sens. 1;H317
May cause an allergic skin reaction.
Carc. 2;H351
Suspected of causing cancer.
Aquatic Chronic 1;H410
Very toxic to aquatic life with long lasting effects.
2.2. LABEL ELEMENTS
Using the Toxicity Data listed in section 11 & 12 the product is
labelled as follows.
WARNING
H226 Flammable liquid and vapour.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H351 Suspected of causing cancer.
H410 Very toxic to aquatic life with long lasting effects.
Poison Schedule: 5
Precautionary Phrases (P) listed below:
[PREVENTION]:
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and
understood.
P210 Keep away from heat