INTERNATIONAL BOTTOMKOTE ERODING ANTIFOULING

Australia - English - APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:
CUPROUS OXIDE
Available from:
AKZO NOBEL PTY LIMITED
INN (International Name):
cuprous oxide(530g/L)
Pharmaceutical form:
PAINT
Composition:
CUPROUS OXIDE MINERAL-COPPER Active 530.0 g/L
Units in package:
4L
Class:
A - Agricultural
Manufactured by:
AKZO NOBEL
Therapeutic group:
BOAT - EXTERIOR (ANTIFOULING)
Therapeutic area:
ANTIFOULING
Therapeutic indications:
FOULING - FOR ANTIFOULING ON BOATS
Product summary:
Poison schedule: 0; Withholding period: WHP: N/A; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Poison schedule: 0; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [FOULING - FOR ANTIFOULING ON BOATS]; Use as an antifouling paint to control marine growth below the waterline on vessels.DO NOT use on Aluminium/Alloy or Zinc sprayed surfaces.
Authorization status:
Stopped
Authorization number:
49610
Authorization date:
2020-07-01

Bottomkote

is a medium strength antifouling that

offers good protection in moderate fouling conditions.

The eroding nature of the coating ensures minimal

build up of old paint on the surface of the hull.

Restraint: Do NOT use on Aluminium/Alloy or Zinc

sprayed surfaces.

May be applied over:

Yacht Primer, Primocon,

Interprotect, and most types of antifoulings provided

they are in sound condition.

Can be overcoated with:

Itself and other selected

antifoulings.

New Surfaces: Timber:

Surfaces must be clean, dry

and well sanded. Prime with either Yacht Primer or

Primocon (single pack options) or Interprotect (two

pack option).

Epoxy Sheathed Timber/Epoxy Composite/Polyester

GRP:

Ensure all traces of release agent and/or

amine bloom are removed from the surfaces using

Surface-Prep. Sand to remove gloss.

Prime with Interprotect.

Steel:

Grit blast to Australian Standard 1627.4 Class

2.5-3 or angle grind to bright shiny steel. Apply

Interprotect (2 pack) or Primocon (Single pack).

Aluminium:

Do not use this product.

Important Notes:

Refer to primer labels for details

of primer application. Refer to filler labels and/or

literature for any filling and fairing information

required.

Props and Shafts:

Longlife or Interspeed 2000 are

recommended, refer label data.

Preparation: Previously Antifouled Surfaces:

Check

existing antifouling may be overcoated with this

product. Desalinate by fresh water wash down.

Follow by wet sanding with typically 150-180 grit if

the surface is in sound condition or typically 80 grit if

it is in poor condition. When the surface is free of

old slime/fouling build up, any loose and flaking

coatings and any other contamination, allow to dry

thoroughly. Patch prime any bare areas as for new

work above and then apply new antifouling.

Preparation: Vessels of suitable construction but

incorporating aluminium out drive units.

Aluminium unit MUST be primed with Interprotect

or Primocon. The unit and areas on the hull 30

centimetres from the unit MUST be antifouled with

Interspeed 2000 before the remainder of the hull is

coated with Bottomkote. It is important to ensure

that the alloy components are well protected with

sacrificial zinc blocks and that the paint system and

the zinc blocks are maintained in excellent order.

Paint preparation:

Stir well and ensure paint

is uniform.

Number of coats:

Apply 2 coats per season on

the hull and 3 on the leading and trailing edges,

waterline, rudder, keel, and skeg.

Practical coverage per coat:

8.5 Sq m/l brushing

7.5 Sq m/l spraying

Thinner:

Antifouling Thinner #3. Thin only when

necessary. Do not exceed 10% by volume.

Equipment Cleaner:

Antifouling Thinner #3.

NOT TO BE USED FOR ANY PURPOSE OR IN ANY

OTHER MANNER CONTRARY TO THIS L ABEL

UNLESS AUTHORISED UNDER APPROPRIATE

LEGISLATION.

If in season maintenance is required lightly wipe

surface with a sponge or equivalent. Avoid wiping

too hard otherwise the in service life of the

coating may be reduced.

Do not dry sand antifoulings.

Wear gloves and goggles.

True colour will develop after immersion.

To prevent premature failure, ensure correct

amount of paint is applied.

Do not allow to dry out.

For further information see appropriate International

literature.

PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND THE

ENVIRONMENT:

As this product is an antifouling paint it contains

certain active materials which if used incorrectly

can have detrimental effects on marine life.

DO NOT contaminate streams,rivers or waterways

with the chemical or used container.

STORAGE AND DISPOSAL:

Store in original container, tightly closed in a cool

dry place. Do not re-use any empty containers.

Dispose of containers by crushing and disposing in

an industrial waste bin or at a Municipal refuse

disposal site. Do not pour left over paint down

drains. Keep unwanted paint in sealed containers

for disposal via special chemical waste collections.

SAFETY DIRECTIONS:

Harmful if swallowed. May irritate the eyes and skin.

Avoid contact with eyes and skin. Do not inhale

vapour or spray mist. When opening the container

wear cotton overalls buttoned to the neck and wrist

(or equivalent clothing), a washable hat and elbow-

length rubber gloves. When mixing or using the

product wear cotton overalls buttoned to the neck

and wrist (or equivalent clothing), a washable hat,

elbow-length rubber gloves and goggles. If product

gets in eyes, wash it out immediately with water.

Wash hands after use. After each day’s use, wash

gloves, goggles and contaminated clothing.

FIRST AID:

If swallowed, do NOT induce vomiting. Give a glass

of water. If poisoning occurs, contact a doctor or

Poisons Information Centre. Phone Australia 13 11

26; New Zealand 0800 764 766; Asia +65 626 150

MSDS:

Additional information is listed in

the Material Safety Data Sheet.

COMPATIBILITY

PREPARATION

APPLICATION

6 hrs

4 hrs

4 hrs

3 hrs

6 hrs

4 hrs

4 hrs

3 hrs

7 days

5 days

5 days

4 days

16 hrs

6 hrs

5 hrs

4 hrs

36 hrs

24 hrs

24 hrs

24 hrs

Overcoating Time

Immersion Time

Temp

Touch

All products referenced on this label are branded

International products.

0800

808807

New Zealand

Australia

Australia

Akzo Nobel Pty Ltd

115 Hyde Road, Yeronga, Qld, 4104.

New Zealand

Akzo Nobel Coatings Ltd

686 Rosebank Road, Avondale, Auckland.

www.yachtpaint.com

L0267B

and International are trademarks of

International Coatings Limited.

PAINT

U.N.No. 1263

READ SAFETY DIRECTIONS BEFORE OPENING

Bottomkote

ACTIVE CONSTITUENTS 530g/L CUPROUS OXIDE

Use as an Antifouling Paint to control marine growth below the waterline on vessels.

4 litres

hrs = hours

Eroding Antifouling

is a trademark of Akzo Nobel Pty Ltd

NOTES

Below Waterline

Glass Fibres

Wood

Steel

Lead

DIRECTIONS FOR USE

APVMA

Approval No.

49610/RED/0308

1800

251 431

9 311344 244366

FILE NAME: 49610/44037/4LRED/LABEL/MPL/V04

DIMENSION: 570x184MM 570x200MM (including dimension box)

SCALE: 68%

DATE: V04

49610_44037_4L RED_LABEL_MPL_V4:Bottomkote blue 4 Litre OP 8/10/08 4:09 PM Page 1

APPROVED

LABEL

Info

pest

Verified

Bottomkote

is a medium strength antifouling that

offers good protection in moderate fouling conditions.

The eroding nature of the coating ensures minimal

build up of old paint on the surface of the hull.

Restraint: Do NOT use on Aluminium/Alloy or Zinc

sprayed surfaces.

May be applied over:

Yacht Primer, Primocon,

Interprotect, and most types of antifoulings provided

they are in sound condition.

Can be overcoated with:

Itself and other selected

antifoulings.

New Surfaces: Timber:

Surfaces must be clean, dry

and well sanded. Prime with either Yacht Primer or

Primocon (single pack options) or Interprotect (two

pack option).

Epoxy Sheathed Timber/Epoxy Composite/Polyester

GRP:

Ensure all traces of release agent and/or

amine bloom are removed from the surfaces using

Surface-Prep. Sand to remove gloss.

Prime with Interprotect.

Steel:

Grit blast to Australian Standard 1627.4 Class

2.5-3 or angle grind to bright shiny steel. Apply

Interprotect (2 pack) or Primocon (Single pack).

Aluminium:

Do not use this product.

Important Notes:

Refer to primer labels for details

of primer application. Refer to filler labels and/or

literature for any filling and fairing information

required.

Props and Shafts:

Longlife or Interspeed 2000 are

recommended, refer label data.

Preparation: Previously Antifouled Surfaces:

Check

existing antifouling may be overcoated with this

product. Desalinate by fresh water wash down.

Follow by wet sanding with typically 150-180 grit if

the surface is in sound condition or typically 80 grit if

it is in poor condition. When the surface is free of

old slime/fouling build up, any loose and flaking

coatings and any other contamination, allow to dry

thoroughly. Patch prime any bare areas as for new

work above and then apply new antifouling.

Preparation: Vessels of suitable construction but

incorporating aluminium out drive units.

Aluminium unit MUST be primed with Interprotect

or Primocon. The unit and areas on the hull 30

centimetres from the unit MUST be antifouled with

Interspeed 2000 before the remainder of the hull is

coated with Bottomkote. It is important to ensure

that the alloy components are well protected with

sacrificial zinc blocks and that the paint system and

the zinc blocks are maintained in excellent order.

Paint preparation:

Stir well and ensure paint

is uniform.

Number of coats:

Apply 2 coats per season on

the hull and 3 on the leading and trailing edges,

waterline, rudder, keel, and skeg.

Practical coverage per coat:

8.5 Sq m/l brushing

7.5 Sq m/l spraying

Thinner:

Antifouling Thinner #3. Thin only when

necessary. Do not exceed 10% by volume.

Equipment Cleaner:

Antifouling Thinner #3.

NOT TO BE USED FOR ANY PURPOSE OR IN ANY

OTHER MANNER CONTRARY TO THIS LABEL

UNLESS AUTHORISED UNDER APPROPRIATE

LEGISLATION.

If in season maintenance is required lightly wipe

surface with a sponge or equivalent. Avoid wiping

too hard otherwise the in service life of the

coating may be reduced.

Do not dry sand antifoulings.

Wear gloves and goggles.

True colour will develop after immersion.

To prevent premature failure, ensure correct

amount of paint is applied.

Do not allow to dry out.

For further information see appropriateInternational

literature.

PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND THE

ENVIRONMENT:

As this product is an antifouling paint it contains

certain active materials which if used incorrectly

can have detrimental effects on marine life.

DO NOT contaminate streams,rivers or waterways

with the chemical or used container.

STORAGE AND DISPOSAL:

Store in original container, tightly closed in a cool

dry place. Do not re-use any empty containers.

Dispose of containers by crushing and disposing in

an industrial waste bin or at a Municipal refuse

disposal site. Do not pour left over paint down

drains. Keep unwanted paint in sealed containers

for disposal via special chemical waste collections.

SAFETY DIRECTIONS:

Harmful if swallowed. May irritate the eyes and skin.

Avoid contact with eyes and skin. Do not inhale

vapour or spray mist. When opening the container

wear cotton overalls buttoned to the neck and wrist

(or equivalent clothing), a washable hat and elbow-

length rubber gloves. When mixing or using the

product wear cotton overalls buttoned to the neck

and wrist (or equivalent clothing), a washable hat,

elbow-length rubber gloves and goggles. If product

gets in eyes, wash it out immediately with water.

Wash hands after use. After each day’s use, wash

gloves, goggles and contaminated clothing.

FIRST AID:

If swallowed, do NOT induce vomiting. Give a glass

of water. If poisoning occurs, contact a doctor or

Poisons Information Centre. Phone Australia 13 11

26; New Zealand 0800 764 766; Asia +65 626 150

MSDS:

Additional information is listed in

the Material Safety Data Sheet.

COMPATIBILITY

PREPARATION

APPLICATION

6 hrs

4 hrs

4 hrs

3 hrs

6 hrs

4 hrs

4 hrs

3 hrs

7 days

5 days

5 days

4 days

16 hrs

6 hrs

5 hrs

4 hrs

36 hrs

24 hrs

24 hrs

24 hrs

Overcoating Time

Immersion Time

Temp

Touch

All products referenced on this label are branded

International products.

0800

808807

New Zealand

Australia

Australia

Akzo Nobel Pty Ltd

115 Hyde Road, Yeronga, Qld, 4104.

New Zealand

Akzo Nobel Coatings Ltd

686 Rosebank Road, Avondale, Auckland.

www.yachtpaint.com

L0267B

and International are trademarks of

International Coatings Limited.

PAINT

U.N.No. 1263

READ SAFETY DIRECTIONS BEFORE OPENING

Bottomkote

ACTIVE CONSTITUENTS 530g/L CUPROUS OXIDE

Use as an Antifouling Paint to control marine growth below the waterline on vessels.

4 litres

hrs = hours

Eroding Antifouling

is a trademark of Akzo Nobel Pty Ltd

NOTES

Below Waterline

Glass Fibres

Wood

Steel

Lead

DIRECTIONS FOR USE

APVMA

Approval No.

49610/BLACK/0308

1800

251 431

BLACK

after immersion

9 311344 244380

FILE NAME: 49610/44037/4LBLACK/LABEL/MPL/V04

DIMENSION: 570x184MM 570x200MM (including dimension box)

SCALE: 68%

DATE: V04

49610_44037_4LBLACK_LABEL_MPL_V4:Bottomkote blue 4 Litre OP 8/10/08 4:07 PM Page 1

APPROVED

LABEL

Bottomkote

is a medium strength antifouling that

offers good protection in moderate fouling conditions.

The eroding nature of the coating ensures minimal

build up of old paint on the surface of the hull.

Restraint: Do NOT use on Aluminium/Alloy or Zinc

sprayed surfaces.

May be applied over:

Yacht Primer, Primocon,

Interprotect, and most types of antifoulings provided

they are in sound condition.

Can be overcoated with:

Itself and other selected

antifoulings.

New Surfaces: Timber:

Surfaces must be clean, dry

and well sanded. Prime with either Yacht Primer or

Primocon (single pack options) or Interprotect (two

pack option).

Epoxy Sheathed Timber/Epoxy Composite/Polyester

GRP:

Ensure all traces of release agent and/or

amine bloom are removed from the surfaces using

Surface-Prep. Sand to remove gloss.

Prime with Interprotect.

Steel:

Grit blast to Australian Standard 1627.4 Class

2.5-3 or angle grind to bright shiny steel. Apply

Interprotect (2 pack) or Primocon (Single pack).

Aluminium:

Do not use this product.

Important Notes:

Refer to primer labels for details

of primer application. Refer to filler labels and/or

literature for any filling and fairing information

required.

Props and Shafts:

Longlife or Interspeed 2000 are

recommended, refer label data.

Preparation: Previously Antifouled Surfaces:

Check

existing antifouling may be overcoated with this

product. Desalinate by fresh water wash down.

Follow by wet sanding with typically 150-180 grit if

the surface is in sound condition or typically 80 grit if

it is in poor condition. When the surface is free of

old slime/fouling build up, any loose and flaking

coatings and any other contamination, allow to dry

thoroughly. Patch prime any bare areas as for new

work above and then apply new antifouling.

Preparation: Vessels of suitable construction but

incorporating aluminium out drive units.

Aluminium unit MUST be primed with Interprotect

or Primocon. The unit and areas on the hull 30

centimetres from the unit MUST be antifouled with

Interspeed 2000 before the remainder of the hull is

coated with Bottomkote. It is important to ensure

that the alloy components are well protected with

sacrificial zinc blocks and that the paint system and

the zinc blocks are maintained in excellent order.

Paint preparation:

Stir well and ensure paint

is uniform.

Number of coats:

Apply 2 coats per season on

the hull and 3 on the leading and trailing edges,

waterline, rudder, keel, and skeg.

Practical coverage per coat:

8.5 Sq m/l brushing

7.5 Sq m/l spraying

Thinner:

Antifouling Thinner #3. Thin only when

necessary. Do not exceed 10% by volume.

Equipment Cleaner:

Antifouling Thinner #3.

NOT TO BE USED FOR ANY PURPOSE OR IN ANY

OTHER MANNER CONTRARY TO THIS LABEL

UNLESS AUTHORISED UNDER APPROPRIATE

LEGISLATION.

If in season maintenance is required lightly wipe

surface with a sponge or equivalent. Avoid wiping

too hard otherwise the in service life of the

coating may be reduced.

Do not dry sand antifoulings.

Wear gloves and goggles.

True colour will develop after immersion.

To prevent premature failure, ensure correct

amount of paint is applied.

Do not allow to dry out.

For further information see appropriateInternational

literature.

PROTECTION OF WILDLIFE, FISH, CRUSTACEA AND THE

ENVIRONMENT:

As this product is an antifouling paint it contains

certain active materials which if used incorrectly

can have detrimental effects on marine life.

DO NOT contaminate streams,rivers or waterways

with the chemical or used container.

STORAGE AND DISPOSAL:

Store in original container, tightly closed in a cool

dry place. Do not re-use any empty containers.

Dispose of containers by crushing and disposing in

an industrial waste bin or at a Municipal refuse

disposal site. Do not pour left over paint down

drains. Keep unwanted paint in sealed containers

for disposal via special chemical waste collections.

SAFETY DIRECTIONS:

Harmful if swallowed. May irritate the eyes and skin.

Avoid contact with eyes and skin. Do not inhale

vapour or spray mist. When opening the container

wear cotton overalls buttoned to the neck and wrist

(or equivalent clothing), a washable hat and elbow-

length rubber gloves. When mixing or using the

product wear cotton overalls buttoned to the neck

and wrist (or equivalent clothing), a washable hat,

elbow-length rubber gloves and goggles. If product

gets in eyes, wash it out immediately with water.

Wash hands after use. After each day’s use, wash

gloves, goggles and contaminated clothing.

FIRST AID:

If swallowed, do NOT induce vomiting. Give a glass

of water. If poisoning occurs, contact a doctor or

Poisons Information Centre. Phone Australia 13 11

26; New Zealand 0800 764 766; Asia +65 626 150

MSDS:

Additional information is listed in

the Material Safety Data Sheet.

COMPATIBILITY

PREPARATION

APPLICATION

6 hrs

4 hrs

4 hrs

3 hrs

6 hrs

4 hrs

4 hrs

3 hrs

7 days

5 days

5 days

4 days

16 hrs

6 hrs

5 hrs

4 hrs

36 hrs

24 hrs

24 hrs

24 hrs

Overcoating Time

Immersion Time

Temp

Touch

All products referenced on this label are branded

International products.

0800

808807

New Zealand

Australia

Australia

Akzo Nobel Pty Ltd

115 Hyde Road, Yeronga, Qld, 4104.

New Zealand

Akzo Nobel Coatings Ltd

686 Rosebank Road, Avondale, Auckland.

www.yachtpaint.com

L0267B

and International are trademarks of

International Coatings Limited.

PAINT

U.N.No. 1263

READ SAFETY DIRECTIONS BEFORE OPENING

Bottomkote

ACTIVE CONSTITUENTS 530g/L CUPROUS OXIDE

Use as an Antifouling Paint to control marine growth below the waterline on vessels.

BLUE

4 litres

hrs = hours

Eroding Antifouling

is a trademark of Akzo Nobel Pty Ltd

NOTES

Below Waterline

Glass Fibres

Wood

Steel

Lead

9 311344 244373

DIRECTIONS FOR USE

APVMA

Approval No.

49610/BLUE/0308

1800

251 431

FILE NAME: 49610/44037/4LBLUE/LABEL/MPL/V04

DIMENSION: 570x184MM 570x200MM (including dimension box)

SCALE: 68%

DATE: V04

49610_44037_4LBLUE_LABEL_MPL_V4:Bottomkote blue 4 Litre OP 10/10/08 10:17 AM Page 1

APPROVED

LABEL

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

1. Product and company identification

Hazardous according to criteria of the Australian Safety and Compensation Council.

Classified as a Dangerous Good for transport.

Product Name

BOTTOMKOTE ANTIFOULING BLACK

Product Code

YBA154

Intended use

This product is intended for use in the yacht and

boat market.

Refer Technical Data Sheet.

Application Method

Apply by brush and roller for small areas. Airless

spray for large areas.

Refer Technical Data Sheet.

Company Name

International Paint

Unit E54, 76 Waterway Drive

Coomera

Queensland 4209

Australia

Telephone No.

(07) 5573 9600

Fax No.

(07) 5573 9677

24 hour Emergency Telephone No.

1800 680 071

For Poisons Advice telephone

131 126 For Advice to Doctors & Hospitals only

2. Hazard Identification

R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic

environment.

R10 - Flammable.

R22 - Harmful if swallowed.

R43 - May cause sensitisation by skin contact.

S53 - Attention - Avoid exposure - obtain special instructions before use.

S2 - Keep out of the reach of children.

S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where

possible).

Poison Schedule: S5 Signal word CAUTION

HSNO Number

: HSR000921

Further information is given in section 11.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 1

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

3. Composition / information on ingredients

This product contains the following substances that present a hazard within the meaning of the relevant

State and Federal Hazardous Substances regulations. Users are refered to the Australian Safety and

Compensation Council (ASCC) website www.ascc.gov.au for more information.

Ingredient

CAS Number

Concentration

Range%

Symbol

Risk phrases (*)

Rosin

0008050-09-7

25 - 50

Copper(i)oxide

0001317-39-1

25 - 50

Calcium carbonate

0001317-65-3

2.5 - 10

Zinc oxide

0001314-13-2

2.5 - 10

R50/53

Iron(III) oxide

0001317-61-9

2.5 - 10

Naphtha (petroleum), hydrodesulfurized

heavy

0064742-82-1

1 - 2.5

Other ingredients in this product have been determined not to be hazardous

* The full text of the above phrases are shown in section 16.

4. First aid measures

General

In all cases of doubt, or when symptoms persist, seek medical attention.

Never give anything by mouth to an unconscious person.

Inhalation

Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial

respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give

nothing by mouth.

Eye Contact

Irrigate copiously with clean fresh water for at least 10 minutes, holding the eyelids apart and seek

medical attention.

Skin Contact

Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognised skin

cleanser. Do NOT use solvents or thinners.

Ingestion

If accidentally swallowed obtain immediate medical attention. Keep at rest. Do NOT induce vomiting.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 2

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

5. Fire-fighting measures

Recommended extinguishing media; alcohol resistant foam, CO2, powder, water spray.

Do not use - water jet.

Note; Fire will produce dense black smoke. Decomposition products may be hazardous to health. Avoid

exposure and use breathing apparatus as appropriate.

Cool closed containers exposed to fire by spraying them with water. Do not allow run off water and

contaminants from fire fighting to enter drains or water courses.

6. Accidental release measures

Remove sources of ignition, do not turn lights or unprotected electrical equipment on or off. In case of a

major spill or spillage in a confined space evacuate the area and check that solvent vapour levels are

below the Lower Explosive Limit before re-entering.

Ventilate the area to avoid breathing vapours. Take the personal protective measures listed in Section 8.

Contain and absorb spillage with non-combustible materials e.g. sand, earth, vermiculite. Place in closed

containers outside buildings and dispose of according to relevant State and Federal regulations. (See

section 13).

Clean, preferably with a detergent. Do not use solvents.

Do not allow spills to enter drains or watercourses.

If drains, sewers, streams or lakes are contaminated, inform the relevant Environment Protection

Agency.

Empty containers may contain product residues, including flammable or explosive vapours. Do not cut,

puncture or weld on or near containers. All label warnings must be observed until the containers have

been cleaned or reconditioned.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 3

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

7. Handling and storage

Handling

This product contains solvents. Solvent vapours are heavier than air and may spread along floors.

Vapours may form explosive mixtures with air. Areas of storage, preparation and application should be

ventilated to prevent the creation of flammable or explosive concentrations of vapour in air and avoid

vapour concentrations higher than the occupational exposure limits.

In Storage

Handle containers carefully to prevent damage and spillage.

Naked flames and smoking should not be permitted in storage areas. It is recommended that fork lift

trucks and electrical equipment are protected to the appropriate standard.

In Use

Avoid skin and eye contact. Avoid inhalation of vapours and spray mists. Observe label precautions. Use

personal protection as shown in section 8.

Smoking, eating and drinking should be prohibited in all preparation and application areas.

Never use pressure to empty a container; containers are not pressure vessels.

All sources of ignition (hot surfaces, sparks, open flames etc) should be excluded from areas of

preparation and application. All electrical equipment (including torches) should be protected (Ex) to the

appropriate standard.

The product may charge electrostatically. Always use earthing leads when pouring solvents and

transferring product. Operators should wear clothing which does not generate static (at least 60% natural

fibre) and antistatic footwear; floors should be of conducting type.

Storage

Store in a well ventilated, dry place away from sources of heat and direct sunlight.

Store on concrete or other impervious floor, preferably with bunding to contain any spillage. Do not

stack more than 3 pallets high.

Keep container tightly closed. Containers which are opened must be carefully resealed and kept upright

to prevent leakage. Keep in the original container or one of the same material.

Prevent unauthorised access.

The requirements of AS/NZS1940 (Storage and Handling of Flammable and Combustible Liquids) apply

to all products with a Flash Point less than 61C. Refer to this standard and to State Dangerous Goods

Storage and Handling regulations.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 4

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

8. Exposure controls and personal protection

Engineering Measures

Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local

exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of

particulates and any vapour below occupational exposure limits suitable respiratory protection must be

worn.

Exposure Limits

From the ASCC "Exposure Standards for Atmospheric Contaminants in the Occupational Environment".

For detailed information refer to the ASCC web site (www.ascc.gov.au).

Material

Short term (15 min. ave)

Long term (8hr time weighted

average)

mg/M3

mg/M3

Calcium carbonate

Zinc oxide

Chemicals classified as hazardous by the ASCC may have a notification alongside the exposure

standard. If such a notification is necessary, it will appear in the far right hand column. The legend is as

follows:

(P) Peak exposure limit

(R) Suppliers Recommended Limit

(Sk) There is a risk of absorption through unbroken skin

(Sen) Sensitiser

(Cat1) Category 1 - established human carcinogen

(Cat2) Category 2 - probable human carcinogen

(Cat3) Category 3 - substances suspected of having carcinogenic potential.

There is no biological limit allocated.

Personal Protection

Respiratory Protection

When concentrations exceed the exposure limits shown above workers must wear appropriate respirators

approved in accordance AS/NZS1716. Provision of other controls such as exhaust ventilation should be

considered if practical.

Eye Protection

Wear safety eyewear, e.g. safety spectacles, goggles or visors to protect against the splash of liquids.

Eyewear should comply with AS/NZS1337.

Wear a full face shield if mixing or pouring operations pose a risk of splashes.

An eye wash station is suggested as a good work place practice.

Hand Protection

Gloves of an appropriate material should be worn during mixing and application. Nitrile or PVC gloves

are generally recommended for products containing solvents.

Skin Protection

Overalls which cover the body, arms and legs should be worn. Skin should not be exposed. Barrier

creams may help to protect areas which are difficult to cover such as the face and neck. They should

however not be applied once exposure has occurred. Petroleum jelly based types such as Vaseline should

not be used. All parts of the body should be washed after contact.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 5

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

9. Physical and chemical properties

Physical State

Liquid

Colour

Flash Point (deg C closed cup)

Autoignition temperature

Viscosity (cSt)

Specific Gravity

1.738

Solvent Weight %

1.39

Vapour Density

Heavier than air.

pH

Lower Explosive Limit (%v/v air)

Solubility in Water

Immiscible

R.A.Q. to ventilate to 10% of the LEL (M3/l)

4.79

Odour

Smell of Solvent

10. Stability and reactivity

Chemical stability

Stable under recommended storage and handling conditions (see section 7).

Conditions to avoid

Keep away from oxidising agents, strongly alkaline and strongly acid materials in order to avoid possible

exothermic reactions.

Incompatible materials

Strong acids, bases, oxidising agents.

Hazardous decomposition products

When exposed to high temperatures may produce hazardous decomposition products such as carbon

monoxide, carbon dioxide, oxides of nitrogen and smoke.

Hazardous reactions

None.

11. Toxicological information

There are no data available on the product itself.

Exposure to solvent vapour concentrations from the component solvents in excess of the stated

occupational exposure limits may result in adverse health effects such as mucous membrane and

respiratory system irritation and adverse effects on the kidneys, liver and central nervous system.

Symptoms include headache, nausea, dizziness, fatigue, muscular weakness, drowsiness and in extreme

cases, loss of consciousness.

Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin

resulting in dryness, irritation and possible non-allergic contact dermatitis. Solvents may also be

absorbed through the skin. Splashes of liquid in the eyes may cause irritation and soreness with possible

reversible damage.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 6

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

12. Ecological information

There are no data available on the product itself.

The product should not be allowed to enter drains or water courses.

13. Disposal considerations

Do not allow into drains or water courses. Wastes and empty containers should be disposed of in

accordance with State and Federal regulations.

Using information provided in this data sheet advice should be obtained from the local Waste Regulation

Authority as to whether special waste regulations apply.

14. Transport information

Transport only in accordance with the following regulations:

Road and Rail

Transport

1263, Paint, 3, III, .3Y

IMDG

reference :

Class/Div.

Subsidiary Class

Proper Shipping Name

Paint

UN No.

1263

MFAG

F-E,S-E

Packaging Group

Marine pollutant

ICAO/IATA

Shipping Name

Paint

Class

UN No.

1263

Packaging Group

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 7

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

15. Regulatory information

The following information is provided in accordance with ASCC guidelines for the labelling of

Hazardous Substances.

Symbol(s)

Harmful

Environmentally Hazardous

Contains;

Copper(i)oxide

Rosin

R. Phrases;

R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic

environment.

R10 - Flammable.

R22 - Harmful if swallowed.

R43 - May cause sensitisation by skin contact.

S. Phrases;

S53 - Attention - Avoid exposure - obtain special instructions before use.

S2 - Keep out of the reach of children.

S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where

possible).

P. Phrases;

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 8

International Paint

Material Safety Data Sheet

YBA154

BOTTOMKOTE ANTIFOULING BLACK

Version Number

Revision Date

02/23/10

16. Other information

Contact point:

HSE Department - Health and Safety Advisor

+61 (0)3 9313 4555

The information on this MSDS is based upon the present state of our knowledge and on current State and

Federal laws.

The product should not be used for purposes other than shown in the product data sheet without first

obtaining written advice.

It is always the responsibility of the user to take all necessary steps to meet the demands of applicable

legislation.

The information in this Material Safety Data Sheet is required according to State and Federal legislation

and following ASCC guidance (as amended).

The full text of the R phrases appearing in section 3 is:

R22 - Harmful if swallowed.

R43 - May cause sensitisation by skin contact.

R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic

environment.

R65 - Harmful: May cause lung damage if swallowed.

All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith

and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such

information.

Page 9

Similar products

Search alerts related to this product

View documents history

Share this information