INTERNATIONAL BIOLUX NEW TECHNOLOGY TRILUX 33 HARD ANTIFOULING FOR ALUMINIUM

Country: Australia

Language: English

Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Buy It Now

Active ingredient:

COPPER PRESENT AS CUPROUS THIOCYANATE; ZINC PYRITHIONE

Available from:

AKZO NOBEL PTY LIMITED

INN (International Name):

Cu as CuCNS(138g/L)+zinc pyrithione(56g/L)

Pharmaceutical form:

PAINT

Composition:

COPPER PRESENT AS CUPROUS THIOCYANATE CYANIDE Active 125.0 g/L; ZINC PYRITHIONE MINERAL-ZINC Active 50.0 g/L

Units in package:

BLACK 10L; BLACK 1L; BLACK 4L; BLUE 10L; BLUE 1L; BLUE 4L; GREY 1L; GREY 4L; RED 4L; WHITE 1L; WHITE 4L

Class:

A - Agricultural

Manufactured by:

AKZO NOBEL

Therapeutic group:

BOAT - ALUMINIUM | ALUMINIUM BOAT

Therapeutic area:

ANTIFOULING

Therapeutic indications:

MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS

Product summary:

Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BOAT - ALUMINIUM: [MARINE GROWTH]; Poison schedule: 6; Withholding period: ; Host/pest details: BOAT - ALUMINIUM: [MARINE GROWTH]; Use as an antifouling paint to control marine growth below the waterline on vessels.

Authorization status:

Registered

Authorization date:

2023-07-01

Patient Information leaflet

                                TRILUX
33
Use
as an
Antifouling Paint to control
marine
growth
below
the
weterisne
on
vessels..
Hard Antifouling for Aluminium
CONSTITUENTS 138
COPPER (Cu) present as CUPROUS
THIOCYA
56 g/L ZINC PYRITHIONE
*ANT3R 114X368*
114MM (H)X 368MM (140
(INCLUDING LOMM GLUE MARGIN)
POISON
KEEP
OUT OF REACH OF
CHILDREN
READ
SAFETY DIRECTIONS BEFORE OPEMNG
INTERNATIONALE
DIRECTIONS FOR USE
00805 33 Is
•
highly effective antrl cuing for um on correctly primed
aluminium surf... It is suitable for use on
SI
types of aluminium craft,
out-drives and outboards.
Special Warnings: Ensure correct primers are used before applying
this product.
COMPATIBILITY
May be applied m. Mimocoo. Interpnatect. Taus, Interspood 2000.
CanM overcoat. with: Itself.
PREPARATION
New Surfece.: Th.. Surfaces must be clean. dry and well sanded.
Prima with either Primocon (single pack) or Interprolect too pack).
Epoxy Sheathed TImber/Eposy Compo.M/Polyester GPM Ensure all
In al release agent and/or amine bloom are removed from the
surfaces using Squid detergent and water. Send to remove glom Prime
with Inteprotect.
Steel:Grit blest to Australian Standard 1827.4 Clem 2.5-3. Prkne with
Into/protect (two pack) or Pernocon (single pack).
Aluminium Mar grit bleat to whey., profile of 50-75 microns. or
power grind with 80 grit dens to obtain bright shiny metal. Prime with
Intel/protect cr PrImscon.
Important Note Refer to primer label Mr details of primer application.
Helen to filer labels Wor literature FOR ANY
Sling and taking Information.
Previotely AritHouled Surfecers: Check misting antifouling may be
overcoa(ed with this product.
In SOMA
mem
•
meter coat of
PI
-
14110cm
may be required. Desalinate by
fresh vorla wash down. Follow by wet sanding with typically 150-180
gat
If the surface kr Or sound condition
or
typically
aa
9M if it is
it
Poor
condition. 1011.0 the surface le free of old slimenouling build up,
any loose
and Naing coatings and any other contamination. allow to dry
thorougay.
Patch prime any bare Imes
as
for new work above and then
*WY
Pri
                                
                                Read the complete document
                                
                            

Summary of Product characteristics

                                AKZO NOBEL YACHT COATINGS
MATERIAL SAFETY DATA SHEET
YBA064
TRILUX 33 WHITE
VERSION NUMBER 1 REVISION DATE 04/11/13
1. Product and company identification
Hazardous according to criteria of Safework Australia.
Classified as a Dangerous Good for transport according to the ADG code
(7th edition).
Product Name
TRILUX 33 WHITE
Product Code
YBA064
Intended use
This product is intended for use in the Yacht
market.
Refer Technical Data Sheet.
Application Method
Apply by brush and roller for small areas.
Airless spray for large areas.
Refer Technical Data Sheet.
Company Name
Akzo Nobel Yacht Coatings
Unit E54, 76 Waterway Drive
Coomera
Queensland 4209
Australia
Telephone No.
(07) 5573 9600
Fax No.
(07) 5573 9677
24 hour Emergency Telephone No.
1800 680 071
For Poisons Advice telephone
131 126 For Advice to Doctors & Hospitals only
2. Hazard Identification
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse
effects in the aquatic
environment.
R62 - Possible risk of impaired fertility.
R63 - Possible risk of harm to the unborn child.
R10 - Flammable.
R21 - Harmful in contact with skin.
R23 - Toxic by inhalation.
R38 - Irritating to skin.
R43 - May cause sensitisation by skin contact.
S1/2 - Keep locked up and out of the reach of children.
S23 - Do not breathe vapour/spray.
S36/37 - Wear suitable protective clothing and gloves.
S45 - In case of accident or if you feel unwell, seek medical advice
immediately (show the label where
possible).
S50 - Do not mix with acid.
S51 - Use only in well-ventilated areas.
Poison Schedule: S6 Signal word POISON
HSNO NUMBER
: HSR000121
Further information is given in section 11.
All information concerning this product and/or suggestions for
handling and use contained herein are offered in good faith
and are believed to be reliable. Akzo Nobel however makes no warranty
as to the accuracy of and/or sufficiency of such
information.
PAGE 1
AKZO NOBEL YACHT COATINGS
MATERIAL SAFETY DATA SHEET
YBA064
TRILUX 33 WHITE
VERSION NUMBER 1 REVISION DATE 04/11/13
3. Composition / informa
                                
                                Read the complete document