Country: Australia
Language: English
Source: APVMA (Australian Pesticides and Veterinary Medicines Authority)
CUPROUS OXIDE; CUPROUS OXIDE; DIURON; DIURON
AKZO NOBEL PTY LIMITED
cuprous oxide(700-900g/L)+diuron(60-70g/L)
PAINT
CUPROUS OXIDE MINERAL-COPPER Active 700.0 g/L; CUPROUS OXIDE MINERAL-COPPER Active 900.0 g/L; DIURON UREA-SUBSTITUTED Active 70.0 g/L; DIURON UREA-SUBSTITUTED Active 60.0 g/L
10L; 4L
A - Agricultural
AKZO NOBEL
BOAT - EXTERIOR (ANTIFOULING)
ANTIFOULING
MARINE FOULING
Poison schedule: 0; Withholding period: ; Host/pest details: BOAT - EXTERIOR (ANTIFOULING): [MARINE FOULING]; Use as an antifouling paint to control marine growth below the waterline on pleasure craft.DO NOT use on aluminium/alloy or zinc sprayed surfaces.
Stopped
2018-06-30
10 litres MICRON EXTRA is a high strength antifouling, incorporating Biolux technology, that offers protection in most fouling conditions. Self polishing technology ensures a continuous renewal of the active layer of the paint which results in a hull that stays cleaner for longer and without a heavy build up of old paint. RESTRAINT: DO NOT USE ON ALUMINIUM/ALLOY OR ZINC SPRAYED SURFACES. NOT TO BE USED FOR ANY PURPOSE OR IN ANY OTHER MANNER CONTRARY TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION. MAY BE APPLIED OVER: Yacht Primer, Primocon, Interprotect, and most types of antifoulings provided they are in sound condition. CAN BE OVERCOATED WITH: itself and selected other antifoulings. NEW SURFACES: TIMBER: Surfaces must be clean, dry and well sanded. Prime with either Yacht Primer or Primocon (single pack options) or Interprotect (two pack option). EPOXY SHEATHED TIMBER/EPOXY COMPOSITE/POLYESTER GRP: Ensure all traces of release agent and/or amine bloom are removed from the surfaces using Surface-Prep. Sand to remove gloss. Prime with Interprotect. STEEL: Grit blast to Australian Standard 1627.4 Class 2.5-3 or angle grind to bright shiny steel. Prime with Interprotect (2 pack) or Primocon (Single pack). ALUMINIUM: Do not use this product. IMPORTANT NOTES: Refer to primer labels for details of primer application. Refer to filler labels and/or literature for any filling and fairing information required. PROPS AND SHAFTS: Longlife or Interspeed 2000 are recommended, refer label data. PREVIOUSLY ANTIFOULED SURFACES: Check existing antifouling may be overcoated with this product. Desalinate by fresh water wash down. Follow by wet sanding with typically 150-180 grit if the surface is in sound condition or typically 80 grit if it is in poor condition. When the surface is free of old slime/fouling build up, any loose and flaking coatings and any other contamination, allow to dry thoroughly. Patch prime any bare areas as for new work above and then apply new antifouling. On old antifouling in good condition Read the complete document
INTERNATIONAL PAINT MATERIAL SAFETY DATA SHEET YBA904 MICRON EXTRA DOVER WHITE VERSION NUMBER 3 REVISION DATE 03/10/09 1. Product and company identification Hazardous according to criteria of the Australian Safety and Compensation Council. Classified as a Dangerous Good for transport. Product Name Micron Extra Dover White Product Code YBA904 Intended use This product is intended for use in the yacht and boat market. Refer Technical Data Sheet. Application Method Apply by brush and roller for small areas. Airless spray for large areas. Refer Technical Data Sheet. Company Name International Paint Unit E54, 76 Waterway Drive Coomera Queensland 4209 Australia Telephone No. (07) 5573 9600 Fax No. (07) 5573 9677 24 hour Emergency Telephone No. 1800 680 071 For Poisons Advice telephone 131 126 For Advice to Doctors & Hospitals only 2. Hazard Identification R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R10 - Flammable. R22 - Harmful if swallowed. R43 - May cause sensitisation by skin contact. R65 - Harmful: May cause lung damage if swallowed. S53 - Attention - Avoid exposure - obtain special instructions before use. S2 - Keep out of the reach of children. S23 - Do not breathe vapour/spray. S24 - Avoid contact with skin. S37 - Wear suitable gloves. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). S51 - Use only in well-ventilated areas. Poison Schedule: S5 Signal word CAUTION HSNO NUMBER : HSR000924 Further information is given in section 11. All information concerning this product and/or suggestions for handling and use contained herein are offered in good faith and are believed to be reliable. Akzo Nobel however makes no warranty as to the accuracy of and/or sufficiency of such information. PAGE 1 INTERNATIONAL PAINT MATERIAL SAFETY DATA SHEET YBA904 MICRON EXTRA DOVER WHITE VERSION NUMBER 3 REVISION DATE 03/10/09 3. Composition / information on ingredients This product contains the following subs Read the complete document