INTERNATIONAL VC OFFSHORE HARD RACING ANTIFOULING

Land: Australien

Sprog: engelsk

Kilde: APVMA (Australian Pesticides and Veterinary Medicines Authority)

Aktiv bestanddel:

CUPROUS OXIDE; XYLENE

Tilgængelig fra:

AKZO NOBEL PTY LIMITED

INN (International Name):

Cu as cuprous oxide(344g/L)

Lægemiddelform:

PAINT

Sammensætning:

CUPROUS OXIDE MINERAL-COPPER Active 1000.0 g/kg; XYLENE SOLVENT Active 546.0 g/L

Enheder i pakken:

2L; 800g

Klasse:

A - Agricultural

Fremstillet af:

AKZO NOBEL

Terapeutisk område:

ANTIFOULING

Produkt oversigt:

Poison schedule: 6; Withholding period: ; Host/pest details: RACING CRAFT: [FOULING - FOR ANTIFOULING ON BOATS]; Use as a finish below the waterline on regularly maintained & cleaned racing craft to control short term fouling growthDO NOT use on aluminium, alloy or zinc hulls

Autorisation status:

Registered

Autorisation dato:

2023-07-01

Indlægsseddel

Page 1 of 4
INTERNATIONAL VC OFFSHORE RACING FINISH
81981/104599A
Product Name:
APVMA Approval No:
Label Name:
INTERNATIONAL VC OFFSHORE HARD RACING ANTIFOULING
Signal Headings:
WARNING: KEEP OUT OF REACH OF CHILDREN, BREATHING VAPOUR IS DANGEROUS,
PROVIDE ADEQUATE VENTILATION DURING APPLICATION, DO NOT USE IN THE
PRESENCE OF A NAKED
FLAME, DO NOT SMOKE, READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Constituent
Statements:
SHELL WHITE
Contains: XYLENE 546g/L
WHEN PART A AND PART B ARE MIXED: SUFFICIENT CUPROUS OXIDE TO
PROVIDE 344g/L COPPER, XYLENE 510g/L
MIST GREY
Contains: XYLENE 546g/L
WHEN PART A AND PART B ARE MIXED: SUFFICIENT CUPROUS OXIDE TO
PROVIDE 344g/L COPPER, XYLENE 510g/L
Statement of Claims:
Part A
USE AS A FINISH BELOW THE WATERLINE ON REGULARLY MAINTAINED AND
CLEANED RACING CRAFT TO CONTROL SHORT TERM FOULING GROWTH
IMPORTANT: ONLY TO BE USED IN COMBINATION WITH PART B AS PER
DIRECTIONS FOR USE. SALE OF THIS CONTAINER EXCEPT IN COMBINATION WITH
PART B IS ILLEGAL.
Net Contents:
2 Litre (When mixed with Part B)
Directions for Use:
DIRECTIONS FOR USE
RESTRAINT: Do not use on Aluminium / Alloy or Zinc
VC Offshore Hard Racing Antifouling has been specifically formulated
to assist in reducing
drag and increasing boat speed. It is ideal for the performance
conscious yacht racing or
high speed power craft owners.
PREPARATION RLP APPROVED
Page 2 of 4
New Surfaces: Timber: Surfaces must be clean,
dry and well sanded. Prime with either Primocon
(single pack option) or Interprotect (two pack
option).
Epoxy Sheathed Timber/Epoxy
Composite/Polyester GRP: Ensure all traces of
release agent and/or amine bloom are removed
from the surfaces using water and detergent. Sand
to remove gloss. Prime with Interprotect.
Steel: Grit blast to Australian Standard 1627.4
Class 2.5-3. Prime with Interprotect (two pack) or
Primocon (Single pack).
Aluminium: Do not use this product.
Important Notes: Refer to primer labels for details
of primer application. Refer to filler labels and/or
literature for any filling and fairing in