Biomet 3i External Hex Abutments and Restorative Components

Country: Singapura

Bahasa: Inggeris

Sumber: HSA (Health Sciences Authority)

Boleh didapati daripada:

IMPLANTEX PTE. LTD.

Kelas:

Class C medical device

Dikeluarkan oleh:

Biomet 3i

Kawasan terapeutik:

Dental

Tanda-tanda terapeutik:

Intended for use as an accessory to endosseous dental implants to support a prosthetic device in a partially or edentulous patient. These are intended for use to support single and multiple tooth prostheses, in the mandible or maxilla. The prostheses can be screw or cement retained to the abutment.

Ringkasan produk:

Device System Info:[Sterile Medical Device], Some of the items are sterilized by gamma/E-beam radiation.; Models: MICROMINI PICK-UP COPING 3.4MM (D) - MEC33, MICROMINI HEALING ABUTMENT 3.4MM (D) X 2MM (H) - MHA32, MICROMINI HEALING ABUTMENT 3.4MM(D) x 2MM (H) - MHA33, MICROMINI HEALING ABUTMENT 3.4MM (D) X 4MM (H) - MHA34, MICROMINI HEALING ABUTMENT 3.4MM (D) X 6MM (H) - MHA36, 2-PC MICROMINI HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 3MM (H) - MT233, EP® HEALING ABUTMENT TWO PIECE 3.8MM(P)X 4.0MM(H) - MT234, 2-PC MICROMINI HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 6MM(H) - MT236, 2-PC MICROMINI HEALING ABUTMENT 3.4MM(D) X 5MM(P) X 3MM(H) - MT253, 2-PC MICROMINI HEALING ABUTMENT 3.4MM(D) X 5MM(P) X 4MM(H) - MT254, 2-PC MICROMINI HEALING ABUTMENT 3.4MM(D) X 5MM(P) X 6MM(H) - MT256, 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5MM(P) X 3MM(H) - TH253, 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5MM(P) X 4MM(H) - TH254, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 6MM (H) - TH256, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 8MM (H) - TH258, 2-PC EP HEALING ABUTMETN 4.1MM(D) X 6MM(P) X 3MM (H) - TH263, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 4MM (H) - TH264, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 6MM (H) - TH266, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 8MM (H) - TH268, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 3MM (H) - TH273, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 4MM (H) - TH274, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 6MM (H) - TH276, 2-PC EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 8MM (H) - TH278, EP HEALING ABUTMENT 4.1MM(D) X 4.1MM(P) X 2MM (H) - THA42, EP HEALING ABUTMENT 4.1MM (D) X 4.1MM (P) X 3MM (H) - THA43, EP HEALING ABUTMENT 4.1MM (D) X 4.1MM (P) X 4MM (H) - THA44, EP HEALING ABUTMENT 4.1MM (D) X 4.1MM (P) X 6MM (H) - THA46, EP HEALING ABUTMENT 4.1MM (D) X 4.1MM (P) X 8MM (H) - THA48, EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 2MM (H) - THA52, EP HEALING ABUTMETN 4.1MM (D) X 5MM (P) X 3MM (H) - THA53, EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 4MM (H) - THA54, EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 6MM (H) - THA56, EP HEALING ABUTMENT 4.1MM (D) X 5MM (P) X 8MM (H) - THA58, EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 3MM (H) - THA63, EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 4MM (H) - THA64, EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 6MM (H) - THA66, EP HEALING ABUTMENT 4.1MM (D) X 6MM (P) X 8MM (H) - THA68, EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 3MM (H) - THA73, EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 4MM (H) - THA74, EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 6MM (H) - THA76, EP HEALING ABUTMENT 4.1MM (D) X 7.5MM (P) X 8MM (H) - THA78, 2-PC EP HEALING ABUTMENT 5MM (D)X 5MM(P)X 3MM(H) - WT2553, 2-PC EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 4MM (H) - WT2554, 2-PC EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 6MM (H) - WT2556, 2-PC EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 8MM (H) - WT2558, 2-PC EP HEALING ABUTMENT 5MM(D) X 6MM (P) X 3MM(H) - WT2563, 2-PC EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 4MM (H) - WT2564, 2-PC EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 6MM (H) - WT2566, 2-PC EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 8MM (H) - WT2568, 2-PC EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 3MM (H) - WT2573, 2-PC EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 4MM (H) - WT2574, 2-PC EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 6MM (H) - WT2576, 2-PC EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 8MM (H) - WT2578, 2-PC EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 3MM (H) - WT2663, 2-PC EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 4MM (H) - WT2664, 2-PC EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 6MM (H) - WT2666, 2-PC EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 8MM (H) - WT2668, 2-PC EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 3MM (H) - WT2673, 2-PC EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 4MM (H) - WT2674, 2-PC EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 6MM (H) - WT2676, 2-PC EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 8MM (H) - WT2678, EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 2MM (H) - WTH52, EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 3MM (H) - WTH53, EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 4MM (H) - WTH54, EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 6MM (H) - WTH56, EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 2MM (H) - WTH562, EP HEALING ABUTMENT 5MM(D) X 6MM (P) X 3MM (H) - WTH563, EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 4MM (H) - WTH564, EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 6MM (H) - WTH566, EP HEALING ABUTMENT 5MM (D) X 6MM (P) X 8MM (H) - WTH568, EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 2MM (H) - WTH572, EP HEALING ABUTMENT 5MM(D) X 7.5MM (P) X 3MM (H) - WTH573, EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 4MM (H) - WTH574, EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 6MM (H) - WTH576, EP HEALING ABUTMENT 5MM (D) X 7.5MM (P) X 8MM (H) - WTH578, EP HEALING ABUTMENT 5MM (D) X 5MM (P) X 8MM (H) - WTH58, EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 2MM (H) - WTH62, EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 3MM (H) - WTH63, EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 4MM (H) - WTH64, EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 6MM (H) - WTH66, EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 2MM (H) - WTH672, EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 3MM (H) - WTH673, EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 4MM (H) - WTH674, EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 6MM (H) - WTH676, EP HEALING ABUTMENT 6MM (D) X 7.5MM (P) X 8MM (H) - WTH678, EP HEALING ABUTMENT 6MM (D) X 6MM (P) X 8MM (H) - WTH68, ENCODE DESIGNER ABUTMENT - EDA, ENCODE LAB DESIGNED ZIRCONIA ABUTMENT - EDAZX, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 3.0MM(H) - EHA343, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 4.0MM(H) - EHA344, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 6.0MM(H) - EHA346, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 3.8MM(P) X 8.0MM(H) - EHA348, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 5.0MM(P) X 3.0MM(H) - EHA353, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 5.0MM(P) X 4.0MM(H) - EHA354, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 5.0MM(P) X 6.0MM(H) - EHA356, ENCODE 2-PC EP HEALING ABUTMENT 3.4MM(D) X 5.0MM(P) X 8.0MM(H) - EHA358, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 4.1MM(P) X 3.0MM(H) - EHA443, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 4.1MM(P) X 4.0MM(H) - EHA444, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 4.1MM(P) X 6.0MM(H) - EHA446, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 4.1MM(P) X 8.0MM(H) - EHA448, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5.0MM(P) X 3.0MM(H) - EHA453, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5.0MM(P) X 4.0MM(H) - EHA454, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5.0MM(P) X 6.0MM(H) - EHA456, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 5.0MM(P) X 8.0MM(H) - EHA458, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 6.0MM(P) X 3.0MM(H) - EHA463, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 6.0MM(P) X 4.0MM(H) - EHA464, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 6.0MM(P) X 6.0MM(H) - EHA466, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 6.0MM(P) X 8.0MM(H) - EHA468, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 7.5MM(P) X 3.0MM(H) - EHA473, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 7.5MM(P) X 4.0MM(H) - EHA474, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 7.5MM(P) X 6.0MM(H) - EHA476, ENCODE 2-PC EP HEALING ABUTMENT 4.1MM(D) X 7.5MM(P) X 8.0MM(H) - EHA478, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 5.5MM(P) X 3.0MM(H) - EHA553, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 5.5MM(P) X 4.0MM(H) - EHA554, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 5.5MM(P) X 6.0MM(H) - EHA556, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 5.5MM(P) X 8.0MM(H) - EHA558, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 6.0MM(P) X 3.0MM(H) - EHA563, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 6.0MM(P) X 4.0MM(H) - EHA564, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 6.0MM(P) X 6.0MM(H) - EHA566, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 6.0MM(P) X 8.0MM(H) - EHA568, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 7.5MM(P) X 3.0MM(H) - EHA573, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 7.5MM(P) X 4.0MM(H) - EHA574, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 7.5MM(P) X 6.0MM(H) - EHA576, ENCODE 2-PC EP HEALING ABUTMENT 5.0MM(D) X 7.5MM(P) X 8.0MM(H) - EHA578, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 6.6MM(P) X 3.0MM(H) - EHA663, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 6.6MM(P) X 4.0MM(H) - EHA664, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 6.6MM(P) X 6.0MM(H) - EHA666, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 6.6MM(P) X 8.0MM(H) - EHA668, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 7.5MM(P) X 3.0MM(H) - EHA673, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 7.5MM(P) X 4.0MM(H) - EHA674, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 7.5MM(P) X 6.0MM(H) - EHA676, ENCODE 2-PC EP HEALING ABUTMENT 6.0MM(D) X 7.5MM(P) X 8.0MM(H) - EHA678, PREP-TITE POST 4.1MM(D) X 5MM(P) X 2MM(H) WITH TI HEXED SCREW - APP42, GingHue® Post 4.1MM (D) X 5MM (P) X 2MM (H) - APP452G, GingHue® Post 4.1MM (D) X 5MM (P) X 4MM (H) - APP454G, GingHue® Post 4.1MM (D) X 6MM (P) X 2MM (H) - APP462G, GingHue® Post 4.1MM (D) X 6MM (P) X 4MM (H) - APP464G, GingHue® Post 4.1MM (D) X 7.5MM (P) X 2MM (H) - APP472G, GingHue® Post 4.1MM (D) X 7.5MM (P) X 4MM (H) - APP474G, MICROMINI GINGIHUE POST 3.4MM (D) X 3.8MM(P) X 2MM (H) - MAP32G, MICROMINI GINGI HUE POST 3.4MM (D) X 3.8MM (P) X 4MM (H) - MAP34G, PRE-ANGLED ABUTMENT 15° - 2MM - PA152C, PRE-ANGLED ABUTMENT 15° - 4MM - PA154C, PRE-ANGLED ABUTMENT 15° -6MM - PA156C, PRE-ANGLED ABUTMENT 25° - 2MM - PA252C, PRE-ANGLED ABUTMENT 25° - 4MM - PA254C, PRE-ANGLED ABUTMENT 25° - 6MM - PA256C, 35° PRE-ANGLED ABUTMENT 4.1MM(D) X 5MM(P)X2MM(H) - PA352C, 35° PRE-ANGLED ABUTMENT 4.1MM(D) X 5MM(P)X4MM(H) - PA354C, 35° PRE-ANGLED ABUTMENT 4.1MM(D) X 5MM(P)X6MM(H) - PA356C, GINGIHUE PRE-ANGLED POST 4MM X 5MM X 2MM - PAP452G, GINGIHUE PRE-ANGLED POST 4MM X 5MM X 4MM - PAP454G, GINGIHUE PRE-ANGLED POST 4MM X 6MM X 2MM - PAP462G, GINGIHUE PRE-ANGLED POST 4MM X 6MM X 4MM - PAP464G, GINGIHUE PRE-ANGLED POST 4MM X 7.5MM X 2MM - PAP472G, GINGIHUE PRE-ANGLED POST 4MM X 7.5MM X 4MM - PAP474G, GINGIHUE PRE-ANGLED POST 5MM X 5MM X 2MM - PAP552G, GINGIHUE PRE-ANGLED POST 5MM X 5MM X 4MM - PAP554G, GINGIHUE PRE-ANGLED POST 5MM X 6MM X 2MM - PAP562G, GINGIHUE PRE-ANGLED POST 5MM X 6MM X 4MM - PAP564G, GINGIHUE PRE-ANGLED POST 5MM X 7.5MM X 2MM - PAP572G, GINGIHUE PRE-ANGLED POST 5MM X 7.5MM X 4MM - PAP574G, GINGIHUE PRE-ANGLED POST 6MM X 6MM X 2MM - PAP662G, GINGIHUE PRE-ANGLED POST 6MM X 6MM X 4MM - PAP664G, GINGIHUE PRE-ANGLED POST 6MM X 7.5MM X 2MM - PAP672G, GINGIHUE PRE-ANGLED POST 6MM X 7.5MM X 4MM - PAP674G, UCLA GINGI HUE® 3.4MM(D) - PPMM1, PREP-TITE POST 5MM(D) X 5MM(P) X 2MM(H) WITH TI HEXED SCREW - WPP552, GINGIHUE POST 5MM (D) X 5MM (P) X 2MM (H) - WPP552G, GINGIHUE POST 5MM (D) X 5MM (P) X 4MM (H) - WPP554G, GINGIHUE POST 5MM (D) X 6MM (P) X 2MM (H) - WPP562G, GINGIHUE POST 5MM (D) X 6MM (P) X 4MM (H) - WPP564G, GINGIHUE POST 5MM (D) X 7.5MM (P) X 2MM (H) - WPP572G, GINGIHUE POST 5MM (D) X 7.5MM (P) X 4MM (H) - WPP574G, PREP-TITE POST 6MM(D) X 6MM(P) X 2MM(H) WITH TI HEXED SCREW - WPP662, GINGIHUE POST 6MM (D) X 6MM (P) X 2MM (H) - WPP662G, GINGIHUE POST 6MM (D) X 6MM (P) X 4MM (H) - WPP664G, GINGIHUE POST 6MM (D) X 7.5MM (P) X 2MM (H) - WPP672G, GINGIHUE POST 6MM (D) X 7.5MM (P) X 4MM (H) - WPP674G, ZIREAL POST 4.1MM(D) X 5MM(P) X 2MM(H) - CAP452, ZIREAL POST 4.1MM(D) X 5MM(P) X 4MM(H) - CAP454, ZIREAL POST 4.1MM(D) X 6MM(P) X 4MM(H) - CAP464, ZIREAL POST 5MM(D) X 6MM(P) X 4MM(H) - WCAP564, ZIREAL POST 5MM(D) X 7.5MM(P) X 4MM(H) - WCAP574, IMPLANT TEMP CYLINDER (HEXED) W/HEX SCREW 4.1MM - ITCH0, IMPLANT TEMP CYLINDER (NON-HEXED) W/HEX SCREW 4.1MM (D) - ITCH1, TEMPORARY HEXED CYLINDER 4.1MM(D) WITH RETENTION - ITCS41, TEMPORARY NON-HEXED CYLINDER 4.1MM(D) WITH RETENTION - ITCS42, TEMPORARY HEXED CYLINDER 3.4MM(D) WITH RETENTION - MMTCS1, MICROMINIMPLANT GINGIHUE 15° PRE-ANGLED POST 3.4MM X 3.8MM 2MM - MPAP32G, MICROMINIMPLANT GINGIHUE 15° PRE-ANGLED POST 3.4MM X 3.8MM 4MM - MPAP34G, MICROIMPLANT IMPLANT LABORATORY ANALOG 3.4MM (D) - MMILA, MICROMINI TEMP CYLINDER-HEXED W/HEX SCREW - MMTC1, MICROMINIPLANT PREFORMANCE 15° PRE-ANGLED POST 3.4MM(D) X 3.8MM(P) X 4MM(H) - MPAPF34, MICROMINIPLANT TM PREFORMANCE TM 15° PRE-ANGLED POST 3.4MM(D) X 3.8MM(P) X 6MM(H) - MPAPF36, MICROMINIPLANT PREFORMANCE POST 3.4MM(D) X 3.8MM(P) X 4MM(H) - MPFP34, MicroMiniplant™ PreFormance™ Post 3.4MM(D) X 3.8MM(P) X 6MM(H) - MPFP36, MicroMiniplant™ PreFormance™ Temporary Cylinder 3.4MM (Non-Hexed) - MPFTC32, MICROMINIPLANT PREFORMANCE TEMPORARY CYLINDER 3.4MM (HEXED) - MPFTC34, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 5MM(P) X 4MM(H) - PAPF454, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 5MM(P) X 6MM(H) - PAPF456, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 6MM(P) X 4MM(H) - PAPF464, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 6MM(P) X 6MM(H) - PAPF466, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 7.5MM(P) X 4MM(H) - PAPF474, PreFormance™ 15º PRE-ANGLED Post 4.1MM(D) X 7.5MM(P) X 6MM(H) - PAPF476, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 5MM(P) X 4MM(H) - PAPF554, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 5MM(P) X 6MM(H) - PAPF556, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 6MM(P) X 4MM(H) - PAPF564, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 6MM(P) X 6MM(H) - PAPF566, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 7.5MM(P) X 4MM(H) - PAPF574, PreFormance™ 15º PRE-ANGLED Post 5MM(D) X 7.5MM(P) X 6MM(H) - PAPF576, PreFormance™ 15º PRE-ANGLED Post 6MM(D) X 6MM(P) X 4MM(H) - PAPF664, PreFormance™ 15º PRE-ANGLED Post 6MM(D) X 6MM(P) X 6MM(H) - PAPF666, PreFormance™ 15º PRE-ANGLED Post 6MM(D) X 7.5MM(P) X 4MM(H) - PAPF674, PreFormance™ 15º PRE-ANGLED Post 6MM(D) X 7.5MM(P) X 6MM(H) - PAPF676, PRE-ANGLED ABUTMENT WASHER - PAW00, PreFormance™ Post 4.1MM(D) X 5MM(P) X 4MM(H) - PFP454, PreFormance™ Post 4.1MM(D) X 5MM(P) X 6MM(H) - PFP456, PreFormance™ Post 4.1MM(D) X 6MM(P) X 4MM(H) - PFP464, PreFormance™ Post 4.1MM(D) X 6MM(P) X 6MM(H) - PFP466, PreFormance™ Post 4.1MM(D) X 7.5MM(P) X 4MM(H) - PFP474, PreFormance™ Post 4.1MM(D) X 7.5MM(P) X 6MM(H) - PFP476, PreFormance™ Temporary Cylinder 4.1MM (Hexed) - PFTC41, PreFormance™ Temporary Cylinder 4.1MM (Non-Hexed) - PFTC42, PreFormance™ Post 5MM(D) X 5MM(P) X 4MM(H) - WPFP554, PreFormance™ Post 5MM(D) X 5MM(P) X 6MM(H) - WPFP556, PreFormance™ Post 5MM(D) X 6MM(P) X 4MM(H) - WPFP564, PreFormance™ Post 5MM(D) X 6MM(P) X 6MM(H) - WPFP566, PreFormance™ Post 5MM(D) X 7.5MM(P) X 4MM(H) - WPFP574, PreFormance™ Post 5MM(D) X 7.5MM(P) X 6MM(H) - WPFP576, PreFormance™ Post 6MM(D) X 6MM(P) X 4MM(H) - WPFP664, PreFormance™ Post 6MM(D) X 6MM(P) X 6MM(H) - WPFP666, PreFormance™ Post 6MM(D) X 7.5MM(P) X 4MM(H) - WPFP674, PreFormance™ Post 6MM(D) X 7.5MM(P) X 6MM(H) - WPFP676, PreFormance™ Temporary Cylinder 5MM (Hexed) - WPFTC51, PreFormance™ Temporary Cylinder 5MM (Non-Hexed) - WPFTC52, PreFormance™ Temporary Cylinder 6MM (Hexed) - WPFTC61, PreFormance™ Temporary Cylinder 6MM (Non-Hexed) - WPFTC62, IMPLANT TEMP CYLINDER (HEXED) W/HEX SCREW 5MM(D) - WTC51, IMPLANT TEMP CYLINDER (NON-HEXED) W/HEX SCREW 5MM(D) - WTC52, IMPLANT TEMP CYLINDER (HEXED) W/HEX SCREW 6MM(D) - WTC61, IMPLANT TEMP CYLINDER (NON-HEXED)W/HEX SCREW 6MM(D) - WTC62, TEMP HEXED CYLINDER 5.0 MM (D) WITH RETENTION - WTCS51, TEMP NON-HEXED CYLINDER 5.0 MM (D) WITH RETENTION - WTCS52, TEMP HEXED CYLINDER 6 MM (D) WITH RETENTION - WTCS61, TEMP NON-HEXED CYLINDER 6 MM (D) WITH RETENTION - WTCS62, UCLA GOLD HEXED ABUTMENT W/HEXED SCREW 4.1MM(D) - GUCA1C, UCLA GOLD NON-HEXED ABUTMENT W/HEXED SCREW 4.1MM(D) - GUCA2C, UCLA Castable (Non-Hexed) MicroMiniplant™ Abutment Cylinder 3.4mm(D) - MUCC2C, UCLA ABUTMENT GOLD HEXED 3.4MM(D) - MUCG1C, UCLA ABUTMENT GOLD NON-HEXED 3.4MM(D) - MUCG2C, UCLA GOLD STANDARD ZR HEXED ABUTMENT CYLINDER 4.1MM(D) - SGUCA1C, UCLA GOLD STANDARD ZR HEXED ABUTMENT CYLINDER 5MM(D) - SWGA51C, UCLA GOLD ZR HEXED ABUTMENT CYLINDER 6MM(D) - SWGA61C, UCLA ABUTMENT TITANIUM NON- HEXED 4.1MM(D) - TUCA2C, UCLA CASTABLE (HEXED) CYLINDER 25 PK - UNA125, UCLA CASTABLE (NON-HEXED) CYLINDER 25 PK - UNA225, UCLA CASTABLE (HEXED) CYLINDER - UNAB1C, UCLA CASTABLE (NON-HEXED) CYLINDER - UNAB2C, UCLA GOLD HEXED ABUT SINGLE UNIT 5MM(D) - WGA51C, UCLA GOLD NON-HEXED ABUT MULTI UNIT 5MM(D) - WGA52C, UCLA GOLD HEXED ABUT SINGLE UNIT 6MM(D) - WGA61C, UCLA GOLD NON-HEXED ABUT MULTI UNIT 6MM(D) - WGA62C, UCLA CASTABLE ABUTMENT HEXED 5MM(D) - WPC51C, UCLA CASTABLE ABUTMENT NON-HEXED 5MM(D) - WPC52C, UCLA CASTABLE ABUTMENT (HEXED) W/HEX SCREW 6MM(D) - WPC61C, UCLA CASTABLE ABUTMENT NON-HEXED 6MM(D) - WPC62C, IMPLANT EP PICK-UP COPING 4.1MM (D) X 5MM (P) - IIC12, IMPLANT EP PICK UP COPING 4.1MM(D) X 4.1MM (P) - IIC41, IMPLANT TWIST LOCK COPING 4.1MM(D) X 4.1MM(P) - IIC44, IMPLANT EP TWIST LOCK COPING 4.1MM (D) X 5MM (P) - IIC45, IMPLANT EP TWIST LOCK COPING 4.1MM (D) X 6MM (P) - IIC46, IMPLANT EP TWIST LOCK COPING 4.1MM (D) X 7.5MM (P) - IIC47, IMPLANT EP PICK-UP COPING 4.1MM (D) X 6MM (P) - IIC60, IMPLANT EP PICK-UP COPING 4.1MM (D) X 7.5MM (P) - IIC75, MICROMINI PICK-UP COPING 3.4MM (D) - MIC33, IMPLANT EP PICK-UP COPING 5MM (D) X 5MM (P) - WIP55, IMPLANT EP PICK-UP COPING 5MM (D) X 6MM (P) - WIP56, IMPLANT EP PICK-UP COPING 5MM (D) X 7.5MM (P) - WIP57, IMPLANT EP PICK-UP COPING 6MM (D) X 6MM (P) - WIP66, IMPLANT EP PICK-UP COPING 6MM (D) X 7.5MM (P) - WIP67, IMPLANT EP TWIST LOCK COPING 5MM (D) X 5MM (P) - WIT55, IMPLANT EP TWIST LOCK COPING 5MM (D) X 6MM (P) - WIT56, IMPLANT EP TWIST LOCK COPING 5MM (D) X 7.5MM (P) - WIT57, IMPLANT EP TWIST LOCK COPING 6MM (D) X 6MM (P) - WIT66, IMPLANT EP TWIST LOCK COPING 6MM (D) X 7.5MM (P) - WIT67, IMPLANT EP TWISTLOCK COPING SCREW (ALL) - WITSC, IMPLANT LABORATORY ANALOG 4.1MM (D) - ILA20, IMPLANT LABORATORY ANALOG 5.0MM (D) - ILAW5, IMPLANT LABORATORY ANALOG 6.0MM (D) - ILAW6, COVER SCREW, HEADLESS - CS275, COVER SCREW - IMPLANT 4.1MM(D) - CS375, COVER SCREW - IMPLANT 5MM(D) - CS500, COVER SCREW - IMPLANT 6MM(D) - CS600, STANDARD ABUTMENT TEMP SCREW 4.1MM (D) - TS250, TITANIUM HEXED SCREW 3MM - TSH30, GOLD-TITE HEXED UNISCREW - UNIHG, TITANIUM HEXED UNISCREW - UNIHT, GOLD-TITE SQUARE UNISCREW - UNISG, TITANIUM SQUARE UNISCREW - UNIST, WAXING SCREW - LPCWS, LABORATORY ABUTMENT HOLDER, 3.4MM(D) - LTAH5, LABORATORY ABUTMENT HOLDER, 4.1MM, 5.0MM AND 6.0MM(D) - LTAH7, SHORT CONE TITANIUM CYLINDER NON-HEXED - MITC2, SQUARE TRY-IN SCREW 3.4MM(D) (5PACK) - MUNITS, POLISHING PROTECTOR 4.1MM(D) - PPIA3, POLISHING PROTECTOR 5.0MM(D) - WPP50, SQUARE TRY-IN SCREW (5PACK) - UNITS, PHOLISHING PROTECTOR 6.0MM(D) - WPP60, 10.0MM WAXING SCREWS/GUIDE PIN- KNURLED - WSK10, 15.0MM WAXING SCREWS/GUIDE PIN- KNURLED - WSK15, KNURLED IMPLANT WAXING SCREW/ GUIDE PIN - WSU30, PROVIDE®ABUTMENT ANALOG 4.8MM(P)X 4.0MM(PH) - PAA484, PROVIDE®ABUTMENT ANALOG 4.8MM(P)X 5.5MM(PH) - PAA485, PROVIDE®ABUTMENT ANALOG 6.5MM(P)X 4.0MM(PH) - PAA654, PROVIDE®ABUTMENT ANALOG 6.5MM(P)X5.5MM(PH) - PAA655, PROVIDE® ABUTMENT ANALOG W/PIN 4.8MM(P) - PAAP48, PROVIDE® ABUTMENT ANALOG W/PIN 6.MM(P) - PAAP65, POSTERIOR ABUTMENT DRIVER 17.0MM - PAD00, POSTERIOR ABUTMENT DRIVER 24.0MM - PAD24, STANDARD ABUTMENT 4.1mm (D) X 2mm (H) - AB200, STANDARD ABUTMENT 4.1mm (D) X 3mm (H) - AB300, STANDARD ABUTMENT 4.1mm (D) X 4mm (H) - AB400, STANDARD ABUTMENT 4.1mm (D) X 5.5mm (H) - AB550, STANDARD ABUTMENT 4.1mm (D) X 7mm (H) - AB700, STANDARD ABUTMENT POLISHING PROTECTOR - PPSA3, STANDARD ABUTMENT GOLD CYLINDER - SGC30, STANDARD ABUTMENT CASTABLE PLASTIC CYLINDER - SGC34, STANDARD ABUTMENT TRANSFER COPING - SIC70, STANDARD ABUTMENT LABORATORY ANALOG - SLA20, STANDARD ABUTMENT PICK-UP COPING - SQIC7, TEMPORARY CYLINDER (STANDARD ABUTMENT) - TC300, TEMP HEALING RETENTION CYLINDER 4.1MM (D) X 4MM (H) - THRC4, TEMP HEALING RETENTION CYLINDER 4.1MM (D) X 6MM (H) - THRC6, CONICAL 17° ANGLED ABUTMENT 4.1mm(D) X 2mm(H) - AC4217, CONICAL 25° ANGLED ABUTMENT 4.1mm(D) X 2mm(H) - AC4225, CONICAL 17° ANGLED ABUTMENT 4.1mm(D) X 4mm(H) - AC4417, CONICAL 25° ANGLED ABUTMENT 4.1mm(D) X 4mm(H) - AC4425, CONICAL ABUTMENT 4.1MM (D) X 1MM (H) - CA001, CONICAL ABUTMENT 4.1MM (D) X 2MM (H) - CA002, CONICAL ABUTMENT 4.1MM (D) X 3MM (H) - CA003, CONICAL ABUTMENT 4.1MM (D) X 4MM (H) - CA004, CONICAL ABUTMENT 4.1MM (D) X 5.5MM (H) - CA055, MICROMINI CONICAL ABUTMENT 3.4MM (D) X 1MM (H) - MCA31, MICROMINI CONICAL ABUTMENT 3.4MM (D) X 2MM (H) - MCA32, MICROMINI CONICAL ABUTMENT 3.4MM (D) X 3MM (H) - MCA33, MICROMINI CONICAL ABUTMENT 3.4MM (D) X 4MM (H) - MCA34, CONICAL ABUTMENT GOLD STANDARD ZR 5MM (D) X 1MM (H) - SWCA51, CONICAL ABUTMENT GOLD STANDARD ZR 5MM (D) X 2MM (H) - SWCA52, CONICAL ABUTMENT GOLD STANDARD ZR 5MM (D) X 3MM (H) - SWCA53, CONICAL ABUTMENT GOLD STANDARD ZR 5MM (D) X 4MM (H) - SWCA54, CONICAL ABUTMENT GOLD STANDARD ZR 5MM (D) X 5.5MM (H) - SWCA55, CONICAL ABUTMENT GOLD STANDARD ZR 6MM (D) X 1MM (H) - SWCA61, CONICAL ABUTMENT GOLD STANDARD ZR 6MM (D) X 2MM (H) - SWCA62, CONICAL ABUTMENT GOLD STANDARD ZR 6MM (D) X 3MM (H) - SWCA63, CONICAL ABUTMENT GOLD STANDARD ZR 6MM (D) X 4MM (H) - SWCA64, CONICAL ABUTMENT GOLD STANDARD ZR 6MM (D) X 5MM (H) - SWCA65, CONICAL ABUTMENT 5MM (D) X 1MM (H) - WCA51, CONICAL ABUTMENT 5MM (D) X 2MM (H) - WCA52, CONICAL ABUTMENT 5MM (D) X 3MM (H) - WCA53, CONICAL ABUTMENT 5MM (D) X 4MM (H) - WCA54, CONICAL ABUTMENT 5MM (D) X 5.5MM (H) - WCA55, CONICAL ABUTMENT 6MM (D) X 2MM (H) - WCA62, CONICAL ABUTMENT 6MM (D) X 3MM (H) - WCA63, CONICAL ABUTMENT 6MM (D) X 5.5MM (H) - WCA65, LOW PROFILE 17° ABUTMENT 3.4MM+661:680(D) X 2MM(H) - LPAC3217, LOW PROFILE 30° ABUTMENT 3.4MM(D) X 3MM(H) - LPAC3330, LOW PROFILE 17° ABUTMENT 3.4MM(D) X 4MM(H) - LPAC3417, LOW PROFILE 30° ABUTMENT 3.4MM(D) X 5MM(H) - LPAC3530, LOW PROFILE 17° ABUTMENT 4.1MM(D) X 2MM(H) - LPAC4217, LOW PROFILE 30° ABUTMENT 4.1MM(D) X 3MM(H) - LPAC4330, LOW PROFILE 17° ABUTMENT 4.1MM(D) X 4MM(H) - LPAC4417, LOW PROFILE 30° ABUTMENT 4.1MM(D) X 5MM(H) - LPAC4530, LOW PROFILE 17° ABUTMENT 5.0MM(D) X 2MM(H) - LPAC5217, LOW PROFILE 30° ABUTMENT 5.0MM(D) X 3MM(H) - LPAC5330, LOW PROFILE 17° ABUTMENT 5.0MM(D) X 4MM(H) - LPAC5417, LOW PROFILE 30° ABUTMENT 5.0MM(D) X 5MM(H) - LPAC5530, LOW PROFILE ABUTMENT 3.4MM(D) X 1MM(H) - LPC341, LOW PROFILE ONE-PIECE ABUTMENT 3.4MM(D) X 1MM(H) - LPC341U, LOW PROFILE ABUTMENT 3.4MM(D) X 2MM(H) - LPC342, LOW PROFILE ONE-PIECE ABUTMENT 3.4MM(D) X 2MM(H) - LPC342U, LOW PROFILE ABUTMENT 3.4MM(D) X 3MM(H) - LPC343, LOW PROFILE ONE-PIECE ABUTMENT 3.4MM(D) X 3MM(H) - LPC343U, LOW PROFILE ABUTMENT 3.4MM(D) X 4MM(H) - LPC344, LOW PROFILE ONE-PIECE ABUTMENT 3.4MM(D) X 4MM(H) - LPC344U, LOW PROFILE ABUTMENT 4.1MM(D) X 1MM(H) - LPC441, LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 1MM(H) - LPC441U, LOW PROFILE ABUTMENT 4.1MM(D) X 2MM(H) - LPC442, LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 2MM(H) - LPC442U, LOW PROFILE ABUTMENT 4.1MM(D) X 3MM(H) - LPC443, LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 3MM(H) - LPC443U, LOW PROFILE ABUTMENT 4.1MM(D) X 4MM(H) - LPC444, LOW PROFILE ONE-PIECE ABUTMENT 4.1MM(D) X 4MM(H) - LPC444U, LOW PROFILE ABUTMENT 5.0MM(D) X 1MM(H) - LPC541, LOW PROFILE ONE-PIECE ABUTMENT 5.0MM(D) X 1MM(H) - LPC541U, LOW PROFILE ABUTMENT 5.0MM(D) X 2MM(H) - LPC542, LOW PROFILE ONE-PIECE ABUTMENT 5.0MM(D) X 2MM(H) - LPC542U, LOW PROFILE ABUTMENT 5.0MM(D) X 3MM(H) - LPC543, LOW PROFILE ONE-PIECE ABUTMENT 5.0MM(D) X 3MM(H) - LPC543U, LOW PROFILE ABUTMENT 5.0MM(D) X 4MM(H) - LPC544, LOW PROFILE ONE-PIECE ABUTMENT 5.0MM(D) X 4MM(H) - LPC544U, CAM STRUCTSURE® COPYMILLED BAR 2 IMPLANTS - CSCM02, CAM STRUCTSURE® COPYMILLED BAR 3 IMPLANTS - CSCM03, CAM STRUCTSURE® COPYMILLED BAR 4 IMPLANTS - CSCM04, CAM STRUCTSURE® COPYMILLED BAR 5 IMPLANTS - CSCM05, CAM STRUCTSURE® COPYMILLED BAR 6 IMPLANTS - CSCM06, CAM STRUCTSURE® COPYMILLED BAR 7 IMPLANTS - CSCM07, CAM STRUCTSURE® COPYMILLED BAR 8 IMPLANTS - CSCM08, CAM STRUCTSURE® COPYMILLED BAR 9 IMPLANTS - CSCM09, CAM STRUCTSURE® COPYMILLED BAR 10 IMPLANTS - CSCM10, CAMSTRUCTSURE DOLDER BAR - CSD02, CAMSTRUCTSURE DOLDER BAR - CSD03, CAMSTRUCTSURE DOLDER BAR - CSD04, CAMSTRUCTSURE DOLDER BAR - CSD05, CAMSTRUCTSURE DOLDER BAR - CSD06, CAMSTRUCTSURE DOLDER BAR - CSD07, CAMSTRUCTSURE DOLDER BAR - CSD08, CAMSTRUCTSURE DOLDER BAR - CSD09, CAMSTRUCTSURE DOLDER BAR - CSD10, CAMSTRUCTSURE HADAR BAR - CSH02, CAMSTRUCTSURE HADAR BAR - CSH03, CAMSTRUCTSURE HADAR BAR - CSH04, CAMSTRUCTSURE HADAR BAR - CSH05, CAMSTRUCTSURE HADAR BAR - CSH06, CAMSTRUCTSURE HADAR BAR - CSH07, CAMSTRUCTSURE HADAR BAR - CSH08, CAMSTRUCTSURE HADAR BAR - CSH09, CAMSTRUCTSURE HADAR BAR - CSH10, CAMSTRUCTSURE HYBIRD BAR - CSHY04, CAMSTRUCTSURE HYBIRD BAR - CSHY05, CAMSTRUCTSURE HYBIRD BAR - CSHY06, CAMSTRUCTSURE HYBIRD BAR - CSHY07, CAMSTRUCTSURE HYBIRD BAR - CSHY08, CAMSTRUCTSURE HYBIRD BAR - CSHY09, CAMSTRUCTSURE HYBIRD BAR - CSHY10, CAMSTRUCTSURE PRIMARY BAR - CSP02, CAMSTRUCTSURE PRIMARY BAR - CSP03, CAMSTRUCTSURE PRIMARY BAR - CSP04, CAMSTRUCTSURE PRIMARY BAR - CSP05, CAMSTRUCTSURE PRIMARY BAR - CSP06, CAMSTRUCTSURE PRIMARY BAR - CSP07, CAMSTRUCTSURE PRIMARY BAR - CSP08, CAMSTRUCTSURE PRIMARY BAR - CSP09, CAMSTRUCTSURE PRIMARY BAR - CSP10, DAL-RO THREADED FEMALE - DRAF, DAL-RO CASTABLE SYSTEM - DRCS1, DAL-RO FEMALE METAL - DRFM1, DAL-RO ABUTMENT 4.1MM (D) x 2MM (H) - DRH20, DAL-RO ABUTMENT 4.1MM (D) x 4MM (H) - DRH40, DAL-RO ABUTMENT 4.1MM (D) x 6MM (H) - DRH60, DAL-RO HOUSING/FEMALE ASSEMBLY - DRTH, O-RING ABUTMENT 4.1MM(D) X 2MM(H) - OSO20, O-RING ABUTMENT SCREW-4.1MM(D) X 2MM(H) - OSO20S, O-RING ABUTMENT 4.1MM(D) X 4MM(H) - OSO40, O-RING ABUTMENT SCREW-4.1MM(D) X 4MM(H) - OSO40S, O-RING ABUTMENT 4.1MM(D) X 6MM(H) - OSO60, O-RING ABUTMENT SCREW 4.1MM(D) X 6MM (H) - OSO60S, BLACK REPLACEMENT O-RING - OSOBLK, O-RING CASTABLE SYSTEM - OSOCA, O-RING HOUSING CAP - OSODH, RED PROCESSING O-RING - OSORED, LOCATOR ABUTMENT 1MM - LOA001, LOCATOR ABUTMENT 2MM - LOA002, LOCATOR ABUTMENT 3MM - LOA003, LOCATOR ABUTMENT 4MM - LOA004, LOCATOR ABUTMENT 5MM - LOA005, LOCATOR ABUTMENT 6MM - LOA006, PREP-TITE CAP 5MM: USE WITH MAP32G, MAP34G - PTC345, PRE-TITE CAP 7MM: USE WITH MAP32G, MAP34G - PTC347, PREP-TITE CAP 5MM: USE WITH APP452G, APP454G - PTC455, PREP-TITE CAP 7MM: USE WITH APP452G, APP454G - PTC457, PREP-TITE CAP 5MM: USE WITH APP462G, APP464G, WPP562G, WPP564G - PTC465, PREP-TITE CAP 7MM: USE WITH APP462G, APP464G, WPP562G, WPP564G - PTC467, PREP-TITE CAP 5MM: USE WITH APP472G,APP474G,WPP572G,WPP574G,WPP672G,WPP674G - PTC475, PREP-TITE CAP 7MM: USE WITH APP472G, APP474G, WPP572G, WPP574G, WPP672G, WPP674G - PTC477, PREP-TITE CAP 5MM: USE WITH WPP552G, WPP554G - PTC555, PREP-TITE CAP 7MM: USE WITH WPP552G, WPP554G - PTC557, PREP-TITE CAP 5MM: USE WITH WPP662G, WPP664G - PTC665, PREP-TITE CAP 7MM: USE WITH WPP662G, WPP664G - PTC667, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 1mm(H) - 4.0mm Post - PAK4140, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 1mm(H) - 5.5mm Post - PAK4155, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 2mm(H) - 4.0mm Post - PAK4240, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 2mm(H) - 5.5mm Post - PAK4255, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 3mm(H) - 4.0mm Post - PAK4340, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 3mm(H) - 5.5mm Post - PAK4355, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 4mm(H) - 4.0mm Post - PAK4440, Certain® Provide® Abutment Placement Kit 4.1mm (D) 4.8mm (P) X 4mm(H) - 5.5mm Post - PAK4455, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 1mm(H) - 4.0mm Post - PAK5140, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 1mm(H) - 5.5mm Post - PAK5155, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 2mm(H) - 4.0mm Post - PAK5240, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 2mm(H) - 5.5mm Post - PAK5255, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 3mm(H) - 4.0mm Post - PAK5340, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 3mm(H) - 5.5mm Post - PAK5355, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 4mm(H) - 4.0mm Post - PAK5440, Certain® Provide® Abutment Placement Kit 5.0mm (D) 6.5mm (P) X 4mm(H) - 5.5mm Post - PAK5455, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 1mm(H) - 4.0mm Post - PAK6140, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 1mm(H) - 5.5mm Post - PAK6155, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 2mm(H) - 4.0mm Post - PAK6240, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 2mm(H) - 5.5mm Post - PAK6255, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 3mm(H) - 4.0mm Post - PAK6340, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 3mm(H) - 5.5mm Post - PAK6355, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 4mm(H) - 4.0mm Post - PAK6440, Certain® Provide® Abutment Placement Kit 6.0mm (D) 6.5mm (P) X 4mm(H) - 5.5mm Post - PAK6455, PROVIDE IMPRESSION COPING 4.8MM(P) - 4.0MM POST - PIC484, PROVIDE IMPRESSION COPING WITH HOLES 4.8MM(P) - 4.0MM POST - PIC484H, PROVIDE IMPRESSION COPING 4.8MM(P) - 5.5MM POST - PIC485, PROVIDE IMPRESSION COPING WITH HOLES 4.8MM(P) - 5.5MM POST - PIC485H, PROVIDE IMPRESSION COPING 6.5MM(P) - 4.0MM POST - PIC654, PROVIDE IMPRESSION COPING WITH HOLES 6.5MM(P) - 4.0MM POST - PIC654H, PROVIDE IMPRESSION COPING 6.5MM(P) - 5.5MM POST - PIC655, PROVIDE IMPRESSION COPING WITH HOLES 6.5MM(P) - 5.5MM POST - PIC655H, PROVIDE PROTECTION CAP 4.8MM (P) - 4.0MM POST - PPC484, PROVIDE PROTECTION CAP 4.8MM (P) - 5.5MM POST - PPC485, PROVIDE PROTECTION CAP 6.5MM (P) - 4.0MM POST - PPC654, PROVIDE PROTECTION CAP 6.5MM (P) - 5.5MM POST - PPC655, CERTAIN PROVIDE ABUTMENT RESTORATIVE KIT 4.8MM (P) - 4.0MM (Post) - PRK484, CERTAIN PROVIDE ABUTMENT RESTORATIVE KIT 4.8MM (P) - 5.5MM (Post) - PRK485, CERTAIN PROVIDE ABUTMENT RESTORATIVE KIT 6.5MM (P) - 4.0MM (Post) - PRK654, CERTAIN PROVIDE ABUTMENT RESTORATIVE KIT 6.5MM (P) - 5.5MM (Post) - PRK655, PROVIDE® TEMPORARY CYLINDER 4.8MM(P) - MULTIPLE UNIT - PUA48M, PROVIDE® TEMPORARY CYLINDER 4.8MM(P) - SINGLE UNIT - PUA48S, PROVIDE® TEMPORARY CYLINDER 6.5MM(P) - MULTIPLE UNIT - PUA65M, PROVIDE® TEMPORARY CYLINDER 6.5MM(P) - SINGLE UNIT - PUA65S, PROVIDE® ABUTMENT WAXING SLEEVE 4.8MM(P)MULTI-UNIT - PWS48M, PROVIDE®ABUTMENT WAXING SLEEVE 4.8MM(P)SINGLE- UNIT - PWS48S, PROVIDE® ABUTMENT WAXING SLEEVE 6.5MM(P)MULTI-UNIT - PWS65M, PROVIDE® ABUTMENT WAXING SLEEVE 6.5MM(P)SINGLE- UNIT - PWS65S, CONICAL CASTABLE CYLINDER NON-HEXED 4.1 X 5MM - CACC5, CONICAL GOLD CYLINDER NON-HEXED 6MM(D) - CAGC6, CONICAL TITANIUM CYLINDER NON-HEXED 4.1MM & 5.0MM(D) - CATC5, CONICAL TEMP CYLINDER NON-HEXED - CC300, CHAMFERED GOLD CYLINDER FOR STANDARD ABUTMENT - CGC30, CONICAL EP TWIST LOCK COPING 4.1 & 5MM (D) X 5MM (P) - CIC55, CONICAL EP TWIST LOCK COPING 4.1 & 5MM (D) X 6MM (P) - CIC56, CONICAL EP TWIST LOCK COPING 4.1 & 5MM (D) X 7.5MM (P) - CIC57, CONICAL ABUTMENT LABORATORY ANALOG 4.1MM(D) - CLA20, CONICAL TEMP CYLINDER (HEXED) - CNC30, CONICAL CASTABLE CYLINDER HEXED 4.1MM X 2MM - CNRC5, CONICAL GOLD CYLINDER HEXED 4.1 & 5MM (D) - CNRG5, CONICAL GOLD CYLINDER HEXED 6MM (D) - CNRG6, CONICAL EP PICK-UP COPING (HEXED) 4.1 & 5MM (D) X 5MM (P) - CNRIC, CONICAL EP HEALING CAP 4.1 & 5MM (D) X 5MM (P) - CS250, CONICAL EP HEALING CAP 4.1 & 5MM (D) X 6MM (P) - CS260, CONICAL EP HEALING CAP 4.1 & 5MM (D) X 7.5MM (P) - CS270, CONICAL EP PICK-UP COPING (NON-HEXED) 4.1 & 5MM (D) X 6MM (P) - CSQ06, CONICAL EP PICK-UP COPING (NON-HEXED) 4.1 & 5MM (D) X 7.5MM (P) - CSQ07, CONICAL EP PICK UP COPING NON-HEX 5.0MM(D)X 5.0MM(P)MULTI -UNIT - CSQ17, CONICAL EP PICK-UP COPING (NON-HEXED) 4.1 & 5MM (D) X 5MM (P) - CSQI7, CONICAL EP PICK-UP COPING (HEXED) 4.1 & 5MM (D) X 6MM (P) - CSQN6, CONICAL EP PICK-UP COPING (HEXED) 4.1 & 5MM (D) X 7.5MM (P) - CSQN7, QUICKBRIDGE® CAP - QBCAP, QuickBridge™ Cylinder and Cap - QKBRG, CONICAL ABUTMENT POLISHING PROTECTOR 4.1MM(D) - PPCA3, CONICAL ABUTMENT POLISHING PROTECTOR 3.4MM(D) - PPMC1, CONICAL ABUTMENT GOLD STANDARD ZR 4.1MM (D) X 1MM (H) - SCA001, CONICAL ABUTMENT GOLD STANDARD ZR 4.1MM (D) X 2MM (H) - SCA002, CONICAL ABUTMENT GOLD STANDARD ZR 4.1MM (D) X 3MM (H) - SCA003, CONICAL ABUTMENT GOLD STANDARD ZR 4.1MM (D) X 4MM (H) - SCA004, CONICAL ABUTMENT GOLD STANDARD ZR 4.1MM (D) X 5.5MM (H) - SCA055, MICROMINI CONICAL GOLD CYLINDER (HEXED) - MCAG1, MICROMINI CONICAL GOLD CYLINDER (NON-HEXED) - MCAG2, MICROMINI CONICAL TEMP CYLINDER (HEXED) - MCTC1, MICROMINIMPLANT CONICAL TEMP CYLINDER (NON-HEXED) - MCTC2, MICROMINI CONICAL HEALING CAP 3.4MM (D) - MHC33, CONICAL EP TWIST LOCK COPING (HEXED) 6MM (D) X 6MM (P) - WCT661, CONICAL EP TWIST LOCK COPING (NON-HEXED) 6MM (D) X 7.5MM (P) - WCT672, CONICAL EP TEMP CYLINDER HEXED 6MM(D) X 6MM(P) - WCTC60, CONICAL EP TEMP CYLINDER NON-HEXED 6MM(D) X 6MM(P) - WCTC61, GOLD SLOT SCREW-2MM - GS200, GOLD SLOT SCREW-3MM - GS300, GOLD-TITE HEXED RETAINING SCREW-2MM - GSH20, GOLD-TITE HEXED RETAINING SCREW-3MM - GSH30, GOLD-TITE HEXED RETAINING SCREW-7MM - GSH70, LOW PROFILE LAPPING TOOL - LPCAMI, LOW PROFILE ABUTMENT HEXED CASTABLE CYLINDER - LPCCC1, LOW PROFILE ABUTMENT NON-HEXED CASTABLE CYLINDER - LPCCC2, LOW PROFILE ABUTMENT DISTAL EXTENSION - LPCDE, LOW PROFILE ABUTMENT HEXED GOLD CYLINDER - LPCGC1, LOW PROFILE ABUTMENT NON-HEXED GOLD CYLINDER - LPCGC2, LOW PROFILE ABUTMENT GOLD-TITE RETAINING SCREW - LPCGSH, LOW PROFILE ABUTMENT HEALING CAP - LPCHC, LOW PROFILE LAB ANALOG - LPCLA, LOW PROFILE PICK UP IMPRESSION COPING (HEXED) - LPCPIC1, LOW PROFILE PICK UP IMPRESSION COPING (NON-HEXED) - LPCPIC2, LOW PROFILE POLISHING PROTECTOR - LPCPP, LOW PROFILE ABUTMENT HEXED PREFORMANCE TEMPORARY CYLINDER - LPCPTC1, LOW PROFILE ABUTMENT NON-HEXED PREFORMANCE TEMPORARY CYLINDER - LPCPTC2, LOW PROFILE ABUTMENT QUICKBRIDGE - LPCQB, LOW PROFILE ABUTMENT QUICKBRIDGE REPLACEMENT CAP - LPCQBCAP, LOW PROFILE QUICKBRIDGE® IMPRESSION COPING - LPCRIC, LOW PROFILE ABUTMENT HEXED TEMPORARY CYLINDER - LPCTC1, LOW PROFILE ABUTMENT NON-HEXED TEMPORARY CYLINDER - LPCTC2, LOW PROFILE TWIST LOCK™IMPRESSION COPING(HEXED) - LPCTIC1, LOW PROFILE TWIST LOCK™ IMPRESSION COPING (NON-HEXED) - LPCTIC2, LOW PROFILE ABUTMENT TITANIUM RETAINING SCREW - LPCTSH, LOW PROFILE ABUTMENT LASER WELD CYLINDER - LPCTUCA, LOCATOR EXTRA LIGHT RETENTION MALES 4pk - LAELM, LOCATOR EXTENDED RANGE MALES -4 Pk - LAERM, LOCATOR ABUTMENT IMPRESSION COPING - LAIC1, LOCATOR® ABUTMENT LABORATORY ANALOG - LALA1, LOCATOR REPLACEMENT MALES - 4 Pk - LARMS, LOCATOR® CORE TOOL/ ABUTMENT DRIVER - LCTDR1, LOCATOR EXTRA LIGHT ANGLED REPLACEMENT MALES -4pk - LELARM, LOCATOR LIGHT RETENTION MALES - 4 Pk - LLRMS, LOCATOR CORE TOOL (MALE REMOVAL) - LOA8397, LOCATOR ATTACHMENT - LOAB, LOCATOR® DRIVER TIP 24.0MM(L) - LOADT4, LOCATOR® DRIVER TIP 30.0MM(L) - LOADT9, LOCATOR REPLACEMENT HOUSING - LOAH, LOCATOR REPLACEMENT HOUSING KIT - LORHK, UCLA, PREP-TITE AND ZIREAL® POLISHING PROTECTOR 4.1MM(D) - IPPIA3, UCLA, PREP-TITE AND ZIREAL® POLISHING PROTECTOR 5.0MM(D) - IPPIA5, UCLA, PREP-TITE AND ZIREAL® POLISHING PROTECTOR 6.0MM(D) - IPPIA6, UCLA, PREP-TITE AND ZIREAL® POLISHING PROTECTOR 3.4MM(D) - IPPMM, MANUAL INTERCHANGEABLE DRIVER TIP HANDLE - MIDTH, NARROW POSTERIOR LARGE HEX DRIVER 17.0MM - PHD02N, NARROW STANDARD LARGE HEX DRIVER 24.0MM - PHD03N, NARROW STANDARD SQUARE DRIVER 24.0MM - PSQD1N, NARROW POSTERIOR SQUARE DRIVER 17.0MM - PSQDON, RIGHT ANGLE ABUTMENT DRIVER TIP- STEEL RASA 3 - RASA3, NARROW RIGHT ANGLE HEX DRIVER TIP 24.0MM - RASH3N, LOCATOR®1.25MM .05IN. DRIVER TIP 30.0MM(L)- USED WITH LCTDR1 - RASH4, NARROW RIGHT ANGLE HEX DRIVER TIP 30.0MM - RASH8N, LOCATOR®1.25MM .05IN. DRIVER TIP 24.0MM(L)- USED WITH LCTDR2 - RASH9, SQUARE DRIVER TIP, 24.0MM - RASQ3N, SQUARE DRIVER TIP, 30.0MM - RASQ8N, SCREW REMOVAL KIT - SRT10

Tarikh kebenaran:

2014-06-16