UNIPHOR DAIRY EQUIPMENT SANITISER

Australia - English - APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:
IODINE; PHOSPHORIC ACID
Available from:
Nutrien Ag Solutions Limited
INN (International Name):
available iodine(20g/L)+phosphoric acid(120g/L)
Pharmaceutical form:
AQUEOUS CONCENTRATE
Composition:
IODINE MINERAL-IODINE Active 20.0 g/L; PHOSPHORIC ACID MINERAL-PHOSPHORUS-ACID Active 120.0 g/L
Units in package:
100L; 200L; 20L; 5L
Class:
A - Agricultural
Manufactured by:
LANDMARK OPERATIONS
Therapeutic group:
BULK TANK | MILKING EQUIPMENT | MILKING MACHINE
Therapeutic area:
DAIRY CLEANSER
Therapeutic indications:
BACTERIA | MILKSTONE REMOVAL | MILK FAT | MILK PROTEIN | MINERAL DEPOSITS
Product summary:
Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: BULK TANK: [BACTERIA, MILKSTONE REMOVAL]; MILKING EQUIPMENT: [BACTERIA, MILKSTONE REMOVAL]; Poison schedule: 6; Withholding period: ; Host/pest details: BULK TANK: [BACTERIA, MILKSTONE REMOVAL]; MILKING EQUIPMENT: [BACTERIA, MILKSTONE REMOVAL]; Low foaming dairy sanitiser and milkstone removal.
Authorization status:
Registered
Authorization number:
52871
Authorization date:
2020-07-01

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

1/61 Dowd Street, Welshpool, WA, AUSTRALIA, 6106

(08) 9365 3888

(08) 9365 3888 (08) 9365 3899 AGVANTAGE PTY LTD UNIPHOR SANITISER

CATTLE TREATMENT EYE IRRIGATING SOLUTION UNIPHOR

07 Sep 2007 Fax Supplier Name

Address

Telephone

Emergency

Synonym(s)

Use(s)

Product Name

CLASSIFIED AS HAZARDOUS ACCORDING TO ASCC CRITERIA 2. HAZARDS IDENTIFICATION

RISK PHRASES

Causes severe burns.

SAFETY PHRASES

Avoid contact with skin.

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

None Allocated None Allocated None Allocated

None Allocated None Allocated None Allocated UN No.

Packing Group DG Class

Hazchem Code Subsidiary Risk(s)

EPG

3. COMPOSITION/ INFORMATION ON INGREDIENTS

Ingredient Formula CAS No. Content

PHOSPHOROUS ACID H3-O3-P 10294-56-1 12%

IODINE I2 7553-56-2 2%

WATER H2O 7732-18-5 >60%

Eye If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to

stop by the Poisons Information Centre or a doctor, or for at least 15 minutes.

Skin If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Inhalation If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.

Ingestion For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed,

do not induce vomiting.

Advice to Doctor Treat symptomatically for Iodism. Sodium thiosulphate is used in treatment of chronic ingestion.

4. FIRST AID MEASURES

Page 1 of4

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010 RMT

UNIPHOR SANITISER

Product Name

Fire and

Explosion Treat as per requirements for Surrounding Fires: Evacuate area and contact emergency services. Remain upwind

and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing

Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas.

Extinguishing Prevent contamination of drains or waterways. Flammability Non flammable. May evolve toxic gases (phosphorus oxides) when heated to decomposition. Contact with most

metals may evolve flammable hydrogen gas.

5. FIRE FIGHTING MEASURES

Spillage Contact emergency services where appropriate. Use personal protective equipment. Clear area of all unprotected

personnel. Ventilate area where possible. Contain spillage, then cover / absorb spill with sodium bicarbonate or 50

-50 mixture of sodium carbonate and calcium hydroxide. Collect for complete neutralisation and appropriate

disposal.

Handling Store in a cool, dry, well ventilated area, removed from alkalis, metals, nitromethane, sodium tetrahydroborate,

heat or ignition sources and foodstuffs. Ensure containers are adequately labelled, protected from physical

damage and sealed when not in use. Storage

Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin

contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,

6. ACCIDENTAL RELEASE MEASURES

7. STORAGE AND HANDLING

8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

TWA STEL

ppm mg/m3 ppm mg/m3 Exposure Stds

Ingredient Reference

Iodine ASCC (AUS) 0.1 1 -- --

No biological limit allocated. Biological Limits

Engineering

Controls Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is

recommended. Maintain vapour levels below the recommended exposure standard.

Wear splash-proof goggles, rubber or PVC gloves, coveralls and a faceshield. When using large quantities or

where heavy contamination is likely, wear: a PVC apron and rubber boots. Where an inhalation risk exists, wear:

a Full-face Type B (Inorganic and Acid gas) respirator. If spraying, wear: a Full-face Type B-Class P1 (Inorganic

and Acid Gas and Particulate) or an Air-line respirator. PPE

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance BROWN TO BLACK LIQUID Solubility (Water) SOLUBLE

Odour ODOURLESS Specific Gravity 1.10 to 2.0

pH 1.2 to 2.0 % Volatiles > 60 % (Water)

Vapour Pressure 18 mm Hg @ 20°C Flammability NON FLAMMABLE

Vapour Density NOT AVAILABLE Flash Point NOT RELEVANT

Boiling Point 100°C (Approximately) Upper Explosion Limit NOT RELEVANT

Melting Point < 0°C Lower Explosion Limit NOT RELEVANT

Evaporation Rate AS FOR WATER

Page 2 of4

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010 RMT

UNIPHOR SANITISER

Product Name

Chemical Stability Stable under recommended conditions of storage.

Conditions to Avoid Avoid heat, sparks, open flames and other ignition sources. 10. STABILITY AND REACTIVITY

Material to Avoid Incompatible with alkalis (eg. hydroxides) and metals. Also incompatible with acetic anhydride, acetyl

bromide, ammonia & silver nitrate, disulphuric acid & nitric acid, dichloromethane & sulphuric acid,

disulphuryl difluoride, magnesium perchlorate, nitric acid & silver, phosphorous oxide, platinum,

potassium, potassium tert-butoxide, silver nitrate, tetrachlorosilane, silver oxide and sodium.

Decomposition May evolve toxic gases (phosphorus oxides) when heated to decomposition.

Hazardous Reactions Polymerization is not expected to occur.

Health Hazard

Summary This product has the potential to cause adverse health effects. Use safe work practices to avoid eye or skin

contact and inhalation. Over exposure may result in corrosive tissue damage.

Eye Contact may result in irritation, lacrimation, pain, redness, corneal burns and possible permanent damage.

Inhalation Over exposure may result in irritation of the nose and throat, coughing and bronchitis. High level exposure may

result in ulceration of the respiratory tract, lung tissue damage, chemical pneumonitis and pulmonary oedema.

Effects may be delayed.

Skin Contact may result in irritation, redness, pain, rash, dermatitis and possible burns. Prolonged or repeated contact

may result in ulceration.

Ingestion Ingestion may result in ulceration and burns to the mouth and throat, nausea, vomiting, abdominal pain and

diarrhoea.

Toxicity Data IODINE (7553-56-2)

LCLo (Inhalation): 137 ppm.1 hour (rat)

LD50 (Ingestion): 14000 mg/kg (rat)

LD50 (Subcutaneous): 10500 mg/kg (rat)

LDLo (Ingestion): 28 mg/kg (human)

LDLo (Intravenous): 40 mg/kg (dog)

LDLo (Subcutaneous): 175 mg/kg (rabbit)

11. TOXICOLOGICAL INFORMATION

Environment Phosphoric acid is hazardous to aquatic life at high concentrations. While acidity may be reduced by natural water

minerals, the phosphate may persist indefinitely. When spilled onto soil, it will permeate downward, and may

dissolve some of the soil matter, especially carbonate-based materials. Some acid will be neutralised, however

significant amounts will remain for transport to groundwater. 12. ECOLOGICAL INFORMATION

Waste Disposal Wearing the protective equipment detailed above, neutralise to pH 6-8 by SLOW addition to a saturated sodium

bicarbonate solution or similar basic solution. Dilute with excess water and flush to drain. Waste disposal should

only be undertaken in a well ventilated area.

Legislation Dispose of in accordance with relevant local legislation. 13. DISPOSAL CONSIDERATIONS

14. TRANSPORT INFORMATION

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

None Allocated None Allocated None Allocated

None Allocated None Allocated None Allocated Shipping Name

UN No.

Packing Group DG Class

Hazchem Code Subsidiary Risk(s)

EPG None Allocated

Poison Schedule Classified as a Schedule 5 (S5) Poison using the criteria in the Standard for the Uniform Scheduling of Drugs and

Poisons (SUSDP).

AICS All chemicals listed on the Australian Inventory of Chemical Substances (AICS). 15. REGULATORY INFORMATION

Page 3 of4

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010 RMT

UNIPHOR SANITISER

Product Name

Additional

Information ACIDS: When mixing acids with water (diluting), caution must be taken as heat will be generated which causes

violent spattering. Always add a small volume of acid to a large volume of water, NEVER the reverse.

RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid

exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken.

Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air

powered or air supplied respirators should be considered where prolonged or repeated use is necessary.

ABBREVIATIONS:

ADB - Air-Dry Basis.

BEI - Biological Exposure Indice(s)

CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.

CNS - Central Nervous System.

EINECS - European INventory of Existing Commercial chemical Substances.

IARC - International Agency for Research on Cancer.

M - moles per litre, a unit of concentration.

mg/m3 - Milligrams per cubic metre.

NOS - Not Otherwise Specified.

NTP - National Toxicology Program.

OSHA - Occupational Safety and Health Administration.

pH - relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline).

ppm - Parts Per Million.

RTECS - Registry of Toxic Effects of Chemical Substances.

TWA/ES - Time Weighted Average or Exposure Standard.

HEALTH EFFECTS FROM EXPOSURE:

It should be noted that the effects from exposure to this product will depend on several factors including: frequency

and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of

application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible

scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.

PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:

The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only.

Factors such as method of application, working environment, quantity used, product concentration and the

availability of engineering controls should be considered before final selection of personal protective equipment is

16. OTHER INFORMATION

Report Status This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the

manufacturer's Safety Data Sheet ('SDS').

It is based on information concerning the product which has been provided to RMT by the manufacturer or

obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate

safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of

the product should be obtained directly from the manufacturer.

While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide

any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss,

injury or damage (including consequential loss) which may be suffered or incurred by any person as a

consequence of their reliance on the information contained in this SDS.

Prepared By Risk Management Technologies

5 Ventnor Ave, West Perth

Western Australia 6005

Phone: +61 8 9322 1711

Fax: +61 8 9322 1794

Email: info@rmt.com.au

Web: www.rmt.com.au

07 Sep 2007

End of Report SDS Date:

Page 4 of4

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010 RMT

Similar products

Search alerts related to this product

View documents history

Share this information