THERMO FLUSH LIQUID ACID DAIRY DETERGENT

Australia - English - APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:
DODICIN; GLYCOLIC ACID; PHOSPHORIC ACID
Available from:
TASMAN CHEMICALS PTY. LIMITED
INN (International Name):
phosphoric acid(750g/L)+glycolic acid(100g/L)+dodicin(12.5g/L)
Pharmaceutical form:
LIQUID
Composition:
DODICIN AMINO ACID-GLYCINE Active 12.5 g/L; GLYCOLIC ACID ACID-GENERAL Active 100.0 g/L; PHOSPHORIC ACID MINERAL-PHOSPHORUS-ACID Active 750.0 g/L
Units in package:
110L; 120L; 200L; 20L; 25L; 5L
Class:
A - Agricultural
Therapeutic group:
MILKING EQUIPMENT | MILKING MACHINE
Therapeutic area:
DAIRY CLEANSER
Therapeutic indications:
MILKSTONE REMOVAL | MILK FAT | MILK PROTEIN | MINERAL DEPOSITS
Product summary:
Poison schedule: 5; Withholding period: WHP: N/A; Host/pest details: MILKING EQUIPMENT: [MILKSTONE REMOVAL]; Low foaming detergent for milkstone removal in milking plants.
Authorization status:
Registered
Authorization number:
48264
Authorization date:
2020-07-01

Issue No 2

Page 1 of 3

Issue Date : 27/11/00

Front Label

POISON

KEEP OUT OF REACH OF CHILDREN

READ SAFETY DIRECTIONS BEFORE OPENING OR USING

THERMO FLUSH

LIQUID ACID DAIRY DETERGENT

ACTIVE CONSTITUENT: 750 g/L PHOSPHORIC ACID

100 g/L GLYCOLIC ACID

12.5 g/L DODICIN

Low Foaming Detergent For Milkstone Removal In Milking Plants

CONTENTS: 20L (5L, 25L, 110L, 200L)

Info

pest

Verified

Issue No 2

Page 2 of 3

Issue Date : 27/11/00

APPLICATION :

THERMOFLUSH is a liquid acid based dairy detergent for use every morning for

milkstone removal.

DIRECTIONS FOR USE: (ALL STATES )

SITUATION PURPOSE: RATE:

CRITICAL

COMMENTS:

Use after morning

milking

Milking Plant

Milkstone Standard solution

1. COLD RINSE

Removal

20 mL per 10L of

Rinse plant with cold

hot water

water using 5L per

(85-95 deg C )

set of cups

2. HOT ACID DETERGENT

Flush plant with standard

solution using 5L per set of

cups

3. HOT RINSE

Rinse plant with boiling

water using 5L per set of

cups

NOT TO BE USED FOR ANY PURPOSE OR IN ANY MANNER CONTRARY

TO THIS LABEL UNLESS AUTHORISED UNDER APPROPRIATE

LEGISLATION

PROTECTION OF WILDLIFE, FISH, CRUSTACEANS AND

ENVIRONMENT :

Dangerous to fish. Do not contaminate streams, rivers or waterways with the chemical

or used containers.

STORAGE AND DISPOSAL:

Store in closed, original container in a well ventilated area, as cool as possible, out of

direct sunlight. Triple or preferably pressure rinse containers before disposal. Add

rinsings to solution. Do not dispose of undiluted chemicals on site. If recycling,

replace cap and return clean container to recycler or point of supply. If not recycling,

break, crush, or puncture and bury empty containers in a local authority landfill. If

there is no local authority landfill readily available in your area, bury the containers at

a depth of 500mm in a disposal pit specifically marked and set up for this purpose

clear of waterways, desirable vegetation and tree roots. Empty containers and product

should not be burnt.

Issue No 2

Page 3 of 3

Issue Date : 27/11/00

SAFETY DIRECTIONS :

Corrosive. Attacks eyes, nose, throat and skin. Avoid contact with eyes, skin and

clothing. Do not inhale vapour or spray mist. When preparing the product for

use wear cotton overalls buttoned to the neck and wrist and washable hat,

rubber apron, elbow length neoprene gloves and face shield and chemical

resistance footwear. If clothing becomes contaminated with the product remove

clothing immediately. If product on skin immediately wash area with soap and

water. If product in eyes wash it out immediately with water. After use and

before eating, drinking or smoking wash hands, arms and face with soap and

water. After each day’s use wash gloves, face shield and contaminated clothing.

FIRST AID :

If poisoning occurs, contact a Doctor or Poisons Information Centre. ( eg Australia

13 1126). If swallowed do NOT induce vomiting. Give a glass of water. If skin

contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes,

hold eyes open, flood with water for at least 15 minutes and see a Doctor. For further

information refer to the MSDS for the product.

NRA Approval No: 48264/1200

Batch No:

Date of Manufacture :

UN 1805 HAZCHEM 2R CLASS 8 P.G. III

Manufactured by:

Tasman Chemicals Pty Ltd

2 – 6 Roberna Street

Moorabbin

Victoria 3189

Phone: (03) 9555 8033

Fax:

(03) 9553 2902

Issue No 4 - THERMOFLUSH

Page 1 of 4

Issue Date : 25/01/2016

Prepared By : Keith Sadlier

SECTION 1 –IDENTIFICATION

Product Name

Thermoflush Liquid Acid Dairy Detergent

Recommended Use

Acid Milkstone & Scale Remover

Supplier TASMAN CHEMICALS PTY LTD

ACN : 005 072 659

Street Address 1-7 Bell Grove, Braeside ,

Victoria 3195 AUSTRALIA

Telephone Number

(03) 9587 6777

Facsimilie

(03) 9587 5255

Email

taschem@taschem.com.au

Website

www.tasmanchemicals.com.au

Emergency Telephone Number

1 800 334 556

SECTION 2 – HAZARDS INDENTIFICATION

Hazardous according to criteria of Safe Work Australia.

Hazard Category :

(Corrosive)

Risk Phrases

Harmful if swallowed

Causes burns

Risk of serious damage to eyes

Safety Phrases

S1/2

Keep locked up and out of reach of children

S24/25

Avoid contact with skin and eyes

In case of contact with eyes, rinse immediately with plenty of water and contact a doctor

or the Poisons Information Centre.

Avoid contact with skin, wash immediately with plenty of soap suds

S36/37/39

Wear suitable protective clothing, gloves and eye/face protection

In case of accident or if you feel unwell, seek medical advice immediately ( show the

label wherever possible )

Thermoflush

is classified as Dangerous Goods Class 8 according to the Australian Code for the Transport of

Dangerous Goods by Road and Rail.

SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS

Ingredient

CAS Number

Proportion (%m/m)

Water

7732-18-5

Phosphoric Acid

7664-38-2

Glycolic Acid

79-14-1

Dodecyl-Di(aminoethyl) glycine

Proprietary

VH>60% H>30-60% M=10-30% L=<10%

MATERIAL SAFETY DATA SHEET

Thermoflush Liquid Acid Dairy Detergent

Issue No 4 - THERMOFLUSH

Page 2 of 4

Issue Date : 25/01/2016

Prepared By : Keith Sadlier

SECTION 4 – FIRST AID MEASURES

First Aid

Swallowed:

If swallowed DO NOT induce vomiting. Give a 1-3 glasses of water to drink.

Seek immediate medical assistance or contact the Poisons Information

Centre immediately.

Eye:

If in eyes, hold eyelids apart and flush continuously with running water.

Continue flushing until advised by the Poisons Information Centre or a doctor,

or for at least 15 minutes. Seek immediate medical assistance or contact the

Poisons Information Centre immediately.

Skin:

If skin or hair contact occurs, remove contaminated clothing and flush skin

and hair with running water.

Inhaled

Remove victim from further exposure. Remove contaminated clothing and

loosen remaining clothing. If NOT breathing, apply artificial resuscitation. If

breathing difficult administer oxygen. Allow patient to assume most

comfortable position. Seek medical attention if effects persist.

Advice to Doctor

Treat symptomatically.

SECTION 5 – FIRE FIGHTING MEASURES

Fire/Explosion Hazard

This material is not combustible under normal conditions. However, it can react with certain metals to

produce flammable hydrogen gas. On burning will emit toxic fumes. Fire fighters should wear self-

contained breathing apparatus if risk of exposure to vapour or products of combustion

Keep containers cool by spraying with water to prevent pressure building up inside the drums, causing

them to burst.

Extinguishing Media

Use water spray, ‘alcohol’ foam, dry chemical or carbon dioxide.

Avoid using large quantities of water.

SECTION 6 – ACCIDENTAL RELEASE MEASURES

Spills

Increase ventilation. Wear protective equipment to prevent skin and eye contamination and inhalation of

vapours or mists. Contain using sand or soil – prevent run off into drains and waterways. Use absorbent (

soil, sand vermiculite or other inert material). Neutralise with lime or soda ash. Collect and seal in

properly labelled drums for disposal. If contamination of sewers or waterways has occurred advise local

emergency services.

SECTION 7 – HANDLING AND STORAGE

Handling :

Avoid skin and eye contact

Storage :

Under normal weather conditions store in a well-ventilated area. Store in a dry cool

environment. Keep containers closed at all times when not in use. Store away from

alkalis or chlorine compounds. Check regularly for leaks. Remove drum bungs slowly to

release any internal pressure.

Issue No 4 - THERMOFLUSH

Page 3 of 4

Issue Date : 25/01/2016

Prepared By : Keith Sadlier

SECTION 8 – EXPOSURE CONTROLS / PERSONALPROTECTION

Occupational Exposure Limits : Threshold Limit Values for Phosphoric Acid

Time Weighted Average ( TWA )

1 mg/m

Short Term Exposure Limit ( STEL )

3 mg/m

Exposure Standards (TWA) is the time-Weighted average airborne concentration over an eight-hour working day, for

a five day working week over an entire working life. According to current knowledge this concentration should neither

impair the health or, cause undue discomfort to, nearly all workers.

STEL (Short Term Exposure Limit): the average airborne concentration over a 15 minute period that should not be

exceeded at any time during a normal eight-hour work day.

NOTICE : Absorption through the skin may be a significant source of exposure

Engineering Control Measures : Ensure ventilation is adequate to maintain air concentrations below

recommended exposure standard. Keep containers closed when not in use

Personal Protective Equipment :

Eye:

Chemical goggles / face shield

Hands:

Impervious plastic or rubber gloves.

Other:

Overalls and protective footwear.

Respirator:

If inhalation risk exists wear organic vapour respirator meeting the requirements of the

relevant Australian Standard

Always wash hands before eating, drinking, smoking or using the toilet.

Wash contaminated clothing and other protective equipment before storage and reuse.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

Appearance/Odour:

Clear Green Liquid

pH (as is):

1 to 2

Melting Point:

Flash Point:

Not applicable

Boiling Point:

100°C (approximately)

Volatiles

Water only

Density:@ 25°C

1.40 grams/mL (approximately)

Flammable Limits:

Not applicable

Solubility:

Miscible

SECTION 10 – STABILITY AND REACTIVITY

Stability

Incompatible with alkalis and strong oxidising agents

Reactivity

May react with strong oxidants. Toxic gases and vapours ( Phosphoric Acid

fumes ) may be released

SECTION 11 – TOXOLOGICAL INFORMATION

Health Effects

No adverse health effects expected if the material is handled in accordance with the Material Safety Data

Sheet. Symptoms that may arise if the material is mishandled are :

Acute Effects

Swallowing:

May cause severe pain and burning of the mouth & oesophagus, nausea,

vomiting & Diarrhoea. Oral LD50 = 1530 mg/kg ( Rat ) – Phosphoric Acid

Eye:

A severe eye irritant. May cause severe eye damage

Issue No 4 - THERMOFLUSH

Page 4 of 4

Issue Date : 25/01/2016

Prepared By : Keith Sadlier

Skin:

Contact with skin will result in severe irritation. Repeated or prolonged skin

contact may cause burns and permanent damage.

Dermal LD50 = 2740 mg/kg ( rabbit ) – Phosphoric Acid

Inhaled:

Vapour or mist may be irritant to mucous membranes and respiratory tract

Human TCL0 = 100 mg/m

– Phosphoric Acid

Chronic Effects

Principal routes of exposure are by accidental skin or eye contact

Prolonged or repeated skin contact may have a corrosive action on human tissues

SECTION 12 – ECOLOGICAL INFORMATION

Avoid contaminating waterways. Spills should be contained, absorbed by sand or earth and placed in

sealed plastic or epoxy-lined drums for disposal

SECTION 13 – DISPOSAL CONSIDERATIONS

Refer to Waste Management Authority .

SECTION 14 – TRANSPORT INFORMATION

Classified as a Dangerous Good by the Criteria of the Australian Dangerous Good Code

Proper Shipping Name :

Phosphoric Acid Solution UN Number :

1805

Dangerous Goods Class :

Subsidiary Risk :

Not applicable

Hazchem Code :

Packing Group :

SECTION 15 – REGULATORY INFORMATION

Classification

Based upon information, classified as hazardous according to criteria of Safe

Work Australia

Poisons Schedule

Schedule 6

SECTION 16 – OTHER INFORMATION

Contact Points

Organisation

Location

Telephone

Ask For

Tasman Chemicals Pty Ltd

Braeside,

Victoria,

Australia

(03) 9587 6777

Technical Manager

Poisons Information Centre

13 1126

MSDS are updated frequently. Please ensure that you have a current copy.

This MSDS summarises our best knowledge of the health and safety hazard information of the product;

how to safely handle and use the product in the workplace. If clarification or further information is needed

to ensure that an appropriate risk assessment can be made, the user should contact Tasman Chemicals

Pty Ltd. Our responsibility for products sold are subject to our standard terms and conditions, a copy of

which appears on all invoices. It is also available on request. Where health or safety data given discloses

a risk to the user or environment, it is the responsibility of the Purchaser to pass on that information to

employees or those who may be using the product, ensuring that adequate safety procedures are used

including good industrial hygiene.

Similar products

Search alerts related to this product

View documents history

Share this information