Connector

Main information

  • Trade name:
  • Connector, tubing
  • Class:
  • Class IIa
  • Medicine domain:
  • Humans
  • Medicine type:
  • Medical device

Documents

Localization

  • Available in:
  • Connector, tubing
    Australia
  • Language:
  • English

Other information

Status

  • Source:
  • Dept. of Health,Therapeutic Goods Administration - Australia
  • Authorization number:
  • 217725
  • Last update:
  • 08-10-2017

Public Assessment Report

Public Summary

Summary for ARTG Entry:

217725

Device Technologies Australia Pty Ltd - Connector, tubing

ARTG entry for

Medical Device Included Class IIa

Sponsor

Device Technologies Australia Pty Ltd

Postal Address

Locked Bag 521,FRENCHS FOREST, NSW, 2086

Australia

ARTG Start Date

25/11/2013

Product category

Medical Device Class IIa

Status

Active

Approval area

Medical Devices

Conditions

- The inclusion of the kind of device in the ARTG is subject to compliance with all conditions placed or imposed on the ARTG entry. Refer Part 4-5,

Division 2 (Conditions) of the Therapeutic Goods Act 1989 and Part 5, Division 5.2 (Conditions) of the Therapeutic Goods (Medical Devices) Regulations

2002 for relevant information.

- Breaching conditions of the inclusion related to the device of the kind may lead to suspension or cancellation of the ARTG entry; may be a criminal

offence; and civil penalties may apply.

Manufacturers

Name

Address

WOM World of Medicine GmbH

Salzufer 8

Berlin, Deutschland, 10587

Germany

Products

1. Connector, tubing

Product Type

Single Device Product

Effective date

25/11/2013

GMDN

42988 Low-pressure tubing connector

Intended purpose

A device intended to connect together gas supply tubing to an insufflator.The insufflator is supplied

separately and is an electrically powered device.

Specific Conditions

No Specific Conditions included on Record

© Commonwealth of Australia.This work is copyright.You are not permitted to re-transmit, distribute or commercialise the material without obtaining prior

written approval from the Commonwealth.Further details can be found at http://www.tga.gov.au/about/website-copyright.htm.

Public Summary

Page 1 of

Produced at 10.11.2017 at 01:15:04 AEDT

This is not an ARTG Certificate document.

The onus is on the reader to verify the current accuracy of the information on the document subsequent to the date shown.

Visit www.tga.gov.au for contact information

27-9-2018

Oscor Inc. Issues Recall of TB – Temporary Bipolar Pacing Lead (Unshrouded 2 mm Pins Models)

Oscor Inc. Issues Recall of TB – Temporary Bipolar Pacing Lead (Unshrouded 2 mm Pins Models)

During the use of some TB - Temporary Bipolar Pacing Leads, featuring the 2mm unshrouded connectors, the connector cap housing (see Picture 1, No. 2 Pin Cap and Cover) may slide and potentially expose the connection wire. In some instances, this may cause the wire to be more susceptible to loss of connectivity or breakage during movement of the cables causing interruption of the pacing system. The analysis of the returned devices attributed the failure to a design change of the cap housing of the pins. ...

FDA - U.S. Food and Drug Administration

11-9-2018

Emerson Electric Canada Limited recalls RIDGID NXT 6 Gallon and 9 Gallon Wet/Dry Vacuum Cleaners

Emerson Electric Canada Limited recalls RIDGID NXT 6 Gallon and 9 Gallon Wet/Dry Vacuum Cleaners

The on/off switch can be dislodged or pulled out from the vacuum motor cover. Doing so while the vacuum is plugged in could expose the user to energised wiring connectors and pose a potential shock hazard.

Health Canada

There are no news related to this product.