INTERSMOOTH 360 SPC ANTIFOULING

Australia - English - APVMA (Australian Pesticides and Veterinary Medicines Authority)

Active ingredient:
CUPROUS OXIDE; CUPROUS OXIDE; ZINC PYRITHIONE
Available from:
AKZO NOBEL PTY LIMITED
INN (International Name):
zinc pyrithione(66g/L)+Cu as cuprous oxide(619-626g/L)
Pharmaceutical form:
PAINT
Composition:
CUPROUS OXIDE MINERAL-COPPER Active 619.0 g/L; CUPROUS OXIDE MINERAL-COPPER Active 626.0 g/L; ZINC PYRITHIONE MINERAL-ZINC Active 66.0 g/L
Units in package:
10L
Class:
A - Agricultural
Manufactured by:
AKZO NOBEL
Therapeutic group:
COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS | NAVAL VESSELS (STEEL,FIBREGLASS,TIMBER) | FIBREGLASS HULL | STEEL HULL | TIMBER HULL
Therapeutic area:
ANTIFOULING
Therapeutic indications:
MARINE GROWTH | BARNACLES | FRESH-WATER FOULING ORGANISMS | MARINE FOULING ORGANISMS | MUSSELS
Product summary:
Poison schedule: 6; Withholding period: WHP: N/A; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE GROWTH]; NAVAL VESSELS (STEEL,FIBREGLASS,TIMBER): [MARINE GROWTH]; Poison schedule: 6; Withholding period: ; Host/pest details: COMMERCIAL VESSEL(STEEL,TIMBER,FIBREGLAS: [MARINE GROWTH]; NAVAL VESSELS (STEEL,FIBREGLASS,TIMBER): [MARINE GROWTH]; Use as an antifouling paint to control marine growth.
Authorization status:
Registered
Authorization number:
51971
Authorization date:
2020-07-01

APPROVED

LABEL

Info

pest

Verified

APPROVED

LABEL

High performance, TBT free, self polishing copolymer (SPC) antifouling system with patented Copper Acrylate

technology. PRODUCT DESCRIPTION

Specifically designed for Coastal Vessels.

For use at Maintenance & Repair. INTENDED USES

BEA361-Black, BEA362-Blue, BEA368-Dark Brown, BEA369-Dark Red,

BEA387-Brown

40% ±2% (ISO 3233:1998)

125 microns dry (313 microns wet)

3.2 m²/litre at 125 microns dft, allow appropriate loss factors

Airless Spray, Brush, Roller PRODUCT INFORMATION

Volume Solids

Typical Film Thickness

Theoretical Coverage

Method of Application Finish/Sheen Not applicable

Part B (Curing Agent) Not applicable

Flash Point Single Pack 22°C (Product produced and supplied in North America has a

flashpoint of 21°C due to locally sourced solvents. There is no detrimental

effect on product performance.)

Colour

Drying Information -5°C 5°C 25°C 35°C

Touch Dry [ISO 1517:73] 2 hrs 60 mins 40 mins 30 mins

Before Flooding 30 hrs 18 hrs 12 hrs 10 hrs

Overcoated By -5°C 5°C 25°C 35°C

Intersmooth 360 SPC 12 hrs 28 days 6 hrs 28 days 4 hrs 28 days 3 hrs 28 days

REGULATORY DATA VOC

Note:VOC values are typical and are provided for guidance purposes only. These may be subject to variation

depending on factors such as differences in colour and normal manufacturing tolerances.

518 g/lt as supplied (EPA Method 24)

343 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council

Directive 1999/13/EC)

EPA USA Federal EPA Registration No. 2693-187

This product is not registered in Canada.

See Page 4 for additional Regulatory Data.

This product does not contain organotin compounds acting as biocides and as such is in compliance with the

International Convention on the Control of Harmful Anti-fouling Systems on ships as adopted by IMO in

Intersmooth 360 SPC

TBT Free Self Polishing Copolymer A/F

Page 1 of 4

Ref:77 Issue Date:02/02/2010 Marine Coatings

Intersmooth 360 SPC

TBT Free Self Polishing Copolymer A/F

When used as part of an approved scheme, this material has the following certification:

Product recognised by the following classification societies as compliant with the International Convention on the

Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001):

Lloyds Register

Germanischer Lloyd

Korean Register of Shipping

Det Norske Veritas

Bureau Veritas

CERTIFICATION

Consult your International Paint representative for the system best suited for the surfaces to be protected. SYSTEMS AND

COMPATIBILITY

Use in accordance with the standard Worldwide Marine Specifications.

All surfaces to be coated should be clean, dry and free from contamination.

High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble

contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. SURFACE PREPARATIONS

MAJOR REFURBISHMENT

Intersmooth 360 SPC should always be applied over a recommended primer coating scheme. The primer surface

should be dry and free from all contamination, and Intersmooth 360 SPC must be applied within the overcoating

intervals specified (consult the relevant product data sheet).Areas of breakdown, damage etc., should be prepared to

the specified standard (e.g. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Intersmooth 360 SPC

REPAIR

Application of Intersmooth 360 SPC over self:

Clean the entire area with close high pressure fresh water washing using a fan-jet lance held close to the surface

(3,000 p.s.i., 211 kg/cm²) as soon as the vessel enters dock and before it dries out.

Consult International Paint for alternative methods of surface preparation.

Repair corroded areas with the recommended anticorrosive primer system and apply Intersmooth 360 SPC within

the overcoating interval specified for the primer (consult relevant primer data sheets).

Application of Intersmooth 360 SPC over International Paint TBT-Free, International Paint Intersmooth SPC

or competitors antifoulings:

Consult your International Paint representative for specific recommendations.

NOTE

For use in Marine situations in North America, the following surface preparation standards can be used:

SSPC-SP10 in place of Sa2½ (ISO 8501-1:2007)

Page 2 of 4

Ref:77 Issue Date:02/02/2010 Marine Coatings

Intersmooth 360 SPC

TBT Free Self Polishing Copolymer A/F

This material is a one pack coating. Always mix thoroughly with a power agitator before application.

Application by brush is recommended for small areas only. Multiple coats may be required to achieve specified

film thickness.

Application by roller is recommended for small areas only. Multiple coats may be required to achieve specified

film thickness. Not Recommended. Use International GTA007 only in exceptional circumstances (max 5% by volume). DO NOT

thin more than allowed by local environmental legislation.

International GTA007

In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be

emitted which will require the use of appropriate personal protective equipment and adequate local exhaust

ventilation. In North America do so in accordance with instruction in ANSI/ASC Z49.1 "Safety in Welding and

Recommended

Tip Range 0.46-0.66 mm (18-26 thou)

Total output fluid pressure at spray tip not less than 211 kg/cm² (3000 p.s.i.)

Application by conventional spray is not recommended. APPLICATION

Mixing

Airless Spray

Conventional Spray

Brush

Roller Thinner

Cleaner

Welding Work Stoppages and Cleanup Thoroughly flush all equipment with GTA007. All unused material should be stored in tightly closed containers.

Partially filled containers may show surface skinning and/or a viscosity increase of the material after storage.

Material should be filtered prior to use.

All work involving the application and use of this product should be performed in compliance with all

relevant national Health, Safety & Environmental standards and regulations.

Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health

and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and

container labels. If you do not fully understand these warnings and instructions or if you can not strictly

comply with them, do not use this product. Proper ventilation and protective measures must be provided

during application and drying to keep solvent vapour concentrations within safe limits and to protect

against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (ie. gloves,

goggles, face masks, barrier creams etc.) Actual safety measures are dependant on application methods

and work environment.

EMERGENCY CONTACT NUMBERS:

USA/Canada - Medical Advisory Number 1-800-854-6813

Europe - Contact (44) 191 4696111. For advice to Doctors & Hospitals only contact (44) 207 6359191

SAFETY

Page 3 of 4

Ref:77 Issue Date:02/02/2010 Marine Coatings

Intersmooth 360 SPC

TBT Free Self Polishing Copolymer A/F

Coating lifetime is directly proportional to thickness applied. Performance of the product is dependent upon the

specified film thickness being achieved.

On immersion, Intersmooth 360 SPC will exhibit a slight colour change.

Overcoating information is given for guidance only and is subject to regional variation depending upon local climate

and environmental conditions. Consult your local International Paint representative for specific recommendations.

Apply in good weather. Temperature of the surface to be coated must be at least 3°C above the dew point. For

optimum application properties bring the material to 21-27°C, unless specifically instructed otherwise, prior to mixing

and application. Unmixed material (in closed containers) should be maintained in protected storage in accordance

with information given in the STORAGE Section of this data sheet. Technical and application data herein is for the

purpose of establishing a general guideline of the coating application procedures. Test performance results were

obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published

test results, or any other tests, accurately represent results found in all field environments. As application,

environmental and design factors can vary significantly, due care should be exercised in the selection, verification of

LIMITATIONS

Refer to container label for information concerning Precautionary Statements, Directions for Use and Storage and

Disposal. ADDITIONAL REGULATORY

DATA

UNIT SIZE Unit Size

Pack

For availability of other unit sizes consult International Paint 20 lt 20 lt 20 lt

5 US gal 5 US gal 5 US gal

UNIT SHIPPING WEIGHT Unit Size Unit Weight

20 lt 33.14 Kg

5 US gal 69 lb

Shelf Life 6 months minimum at all temperatures. Subject to reinspection thereafter. Store in dry,

shaded conditions away from sources of heat and ignition. STORAGE

Consult International Paint.

BEA356-Pink available in Singapore, Taiwan and Korea only. WORLDWIDE AVAILABILITY

The information in this data sheet is not intended to be exhaustive; any person using the product for any purpose other than that specifically

recommended in this data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at

their own risk. All advice given or statements made about the product (whether in this data sheet or otherwise) is correct to the best of our knowledge but

we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless

we specifically agree in writing to do so, we do not accept any liability at all for the performance of the product or for (subject to the maximum extent

permitted by law) any loss or damage arising out of the use of the product. We hereby disclaim any warranties or representations, express or implied, by

operation of law or otherwise, including, without limitation, any implied warranty of merchantability or fitness for a particular purpose. All products supplied

and technical advice given are subject to our Conditions of Sale. You should request a copy of this document and review it carefully. The information

contained in this data sheet is liable to modification from time to time in the light of experience and our policy of continuous development. It is the user's

responsibility to check with their local International Paint representative that this data sheet is current prior to using the product. IMPORTANT NOTE

and product names mentioned in this data sheet are trademarks of, or are licensed to, AkzoNobel.

© AkzoNobel, 2010

www.international-marine.com

Page 4 of 4

Ref:77 Issue Date:02/02/2010 Marine Coatings

Similar products

Search alerts related to this product

View documents history

Share this information