IDEDEX TEAT DIP & SPRAY

Australia - English - APVMA (Australian Pesticides and Veterinary Medicines Authority)

Buy It Now

Active ingredient:
IODINE; PHOSPHORIC ACID; GLYCEROL
Available from:
Nutrien Ag Solutions Limited
INN (International Name):
available iodine(20g/L)+glycerol(200g/L)+phosphoric acid(2g/L)
Pharmaceutical form:
TOPICAL SOLUTION/SUSPENSION
Composition:
IODINE MINERAL-IODINE Active 20.0 g/L; PHOSPHORIC ACID MINERAL-PHOSPHORUS-ACID Active 2.0 g/L; GLYCEROL SOLVENT Active 200.0 g/L
Units in package:
1000L; 100L; 200L; 20L; 5L
Class:
VM - Veterinary Medicine
Manufactured by:
LANDMARK OPERATIONS
Therapeutic group:
DAIRY CATTLE | BOVINE | BREEDERS | CALVES | DAIRY COW | GROWERS | LACTATING COW | MILKING COW
Therapeutic area:
DERMATOLOGICAL PREPS.
Therapeutic indications:
WATER TREATMENT/SANITISER
Product summary:
Poison schedule: 6; Withholding period: WITHHOLDING PERIOD: MILK: ZERO (0) DAY S TRADE ADVICE: EXPORT SLAUGHTER INT ERVAL (ESI): THIS PRODUCT DOES NOT HAVE AN ESI ESTABLISHED. FOR ADVICE ON TH E ESI, CONTACT THE MANUFACTURER ON 130 0 255 347 BEFORE USING THIS PRODUCT.; Host/pest details: DAIRY CATTLE: [WATER TREATMENT/SANITISER]; Poison schedule: 6; Withholding period: ; Host/pest details: DAIRY CATTLE: [WATER TREATMENT/SANITISER]; Post milking teat sanitiser with emollient for dairy cattle.
Authorization status:
Registered
Authorization number:
52064
Authorization date:
2020-07-01

TEXT LABEL: IDEDEX

TEAT

&

SPRAY

Immediate Container Label:

Front

Panei-SL,

20L, 100L, 200L, 1000L

Text appearing above the Header and below the Footer lines is not included

the label

POISON

KEEP OUT OF REACH OF CHILDREN

READ SAFETY DIRECTIONS BEFORE OPENING OR USING

FOR ANIMAL TREATMENT ONLY

IDEDEX TEAT DIP

&

SPRAY

Active

Constituents:20

Available Iodine, 200 g/L Glycerol,

2 g/L

Phosphoric

Acid

Post milking teat sanitiser with emollient for dairy cattle

5 L [20L, 1

OOL,

200L, 1

OOOL]

14 October 2013

Approved

Page 1

TEXT LABEL: IDEDEX TEAT

& SPRAY

Immediate

Container

Label:

Ancillary

Panels

-

5L,

20L,

1

OOL,

200L,

1

OOOL

Text

appearing

above

the

Header

and

below

the

Footer

lines

is

not

included

in

the

label

DIRECTIONS FOR USE:

Ensure teats are CLEAN and DRY before milking

reduce organic and bacterial

contaminations and iodine residue

the milk. If washing is required for heavily soiled udders

or teats, ensure they are properly dried.

Thoroughly spray or dip all teats after every milking.

Mix fresh solutions daily.

not top up solutions made up on previous day.

Dosage and Administration:

To make a minimum of 0.5% available iodine

the final solution, dilute 1 part of ldedex in 3

part of clean potable water.

Emollient (food-grade glycerine or propylene glycol emollients) may be included to a

maximum of 10% of the final solution. If emollient is added, dilute 1 part of ldedex

3 part of

water and 0.4 part of emollient.

Dip: Use a plastic or other non-metal type container for iodine solutions. Clean out dip cup

as teat dip gets low.

not top up the dip cup.

Spray: Spray upwards from underneath the teats, not from the side and ensure the whole

surface of each teat is covered.

WITHHOLDING PERIOD: MILK: Zero (0) Days

TRADE ADVICE:

EXPORT SLAUGHTER INTERVAL (ESI): This product does not have an ESI established.

For advice

the ESI, contact the Manufacturer

1300 255 347 before using this product.

SAFETY DIRECTIONS:

Will irritate the eyes and skin. Avoid contact with eyes and skin. If product

eyes, wash it

out immediately with water. When opening the container and preparing the product for use

wear cotton overalls buttoned to the neck and wrist (or equivalent clothing) and elbow-length

chemical resistant gloves and face shield. Wash hands after use. After each day's use, wash

gloves and goggles and face shield.

FIRST AID:

If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 131126.

If swallowed, do NOT induce vomiting. Give a glass of water. If skin contact occurs, remove

contaminated clothing and wash skin thoroughly. If

eyes, hold eyes open, flood with water

for at least 15 minutes and see a doctor.

DISPOSAL:

This container can

recycled

is clean, dry, free of visible residues and has the

drumMUSTER logo visible. Triple or pressure rinse container for disposal. Dispose of rinsate

or any undiluted chemical according

State legislative requirements. Wash outside of the

container and the cap. Store cleaned container

a sheltered place with cap removed. It will

then

acceptable for recycling at any drumMUSTER collection

similar container

management program site. The cap should not be replaced but may be taken separately.

14 October 2013

Page 2

of3

TEXT

lABEL:

IDEDEX TEAT DIP

&

SPRAY

Immediate Container Label:

Ancillary

Panels-5L,

20L, 100L, 200L, 1000L

Text

appearing

above

the

Header

and

below

the

Footer

lines

is

not

included

in

the

label

STORAGE:

Store below 30°C (Room Temperature). Protect from light.

APVMA Approval No. 52064/60199

Batch:

Expiry:

Landmark Operations Ltd

24-26 Hydrive Close

Dandenong VIC 3175

Customer Service 1300 255 347

14 October 2013

Page 3 of 3

1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER

1/61 Dowd Street, Welshpool, WA, AUSTRALIA, 6106

(08) 9365 3888

(08) 9365 3888

(08) 9365 3899

AGVANTAGE PTY LTD

IDEDEX TEAT DIP & SPRAY

AGRICULTURAL APPLICATIONS CATTLE TREATMENT TEAT SANITISER

IDEDEX

07 Sep 2007

Fax

Supplier Name

Address

Telephone

Emergency

Synonym(s)

Use(s)

SDS Date

Product Name

CLASSIFIED AS HAZARDOUS ACCORDING TO ASCC CRITERIA

2. HAZARDS IDENTIFICATION

RISK PHRASES

Irritating to eyes.

SAFETY PHRASES

Avoid contact with skin.

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

None Allocated

None Allocated

None Allocated

None Allocated

None Allocated

None Allocated

UN No.

Packing Group

DG Class

Hazchem Code

Subsidiary Risk(s)

EPG

3. COMPOSITION/ INFORMATION ON INGREDIENTS

Ingredient

Formula

CAS No.

Content

IODINE

7553-56-2

PHOSPHORIC ACID

H3-P-O4

7664-38-2

0.2%

WATER

7732-18-5

>60%

ADDITIVE(S)

Not Available

Not Available

Not Available

Eye

If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to

stop by the Poisons Information Centre or a doctor, or for at least 15 minutes.

Skin

If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue

flushing with water until advised to stop by the Poisons Information Centre or a doctor.

Inhalation

If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.

Ingestion

For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed,

do not induce vomiting.

Advice to Doctor

Treat symptomatically

4. FIRST AID MEASURES

Page 1 of 5

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010

IDEDEX TEAT DIP & SPRAY

Product Name

Fire and

Explosion

Treat as per requirements for Surrounding Fires: Evacuate area and contact emergency services. Remain upwind

and notify those downwind of hazard. Wear full protective equipment including Self Contained Breathing

Apparatus (SCBA) when combating fire. Use waterfog to cool intact containers and nearby storage areas.

Extinguishing

Prevent contamination of drains or waterways.

Flammability

Non flammable. May evolve toxic gases (iodides) when heated to decomposition.

Hazchem Code

None Allocated

5. FIRE FIGHTING MEASURES

Spillage

Contact emergency services where appropriate. Use personal protective equipment. Clear area of all unprotected

personnel. Ventilate area where possible. Contain spillage, then cover / absorb spill with non-combustible

absorbant material (vermiculite, sand, or similar), collect and place in suitable containers for disposal.

Handling

Store in a cool, dry, well ventilated area, removed from acetaldehyde, chlorine, fluorine, ammonia, metals and

reducing agents, heat or ignition sources and foodstuffs. Ensure containers are adequately labelled, protected

from physical damage and sealed when not in use. Check regularly for leaks or spills. Large storage areas should

have appropriate ventilation systems.

Storage

Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin

contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating,

drinking and smoking in contaminated areas.

6. ACCIDENTAL RELEASE MEASURES

7. STORAGE AND HANDLING

8. EXPOSURE CONTROLS/ PERSONAL PROTECTION

TWA

STEL

ppm

mg/m3

ppm

mg/m3

Exposure Stds

Ingredient

Reference

Iodine

ASCC (AUS)

Phosphoric acid

ASCC (AUS)

No biological limit allocated.

Biological Limits

Engineering

Controls

Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is

recommended.

Wear splash-proof goggles and neoprene or viton (R) gloves. When using large quantities or where heavy

contamination is likely, wear: coveralls. Where an inhalation risk exists, wear: an Air-line respirator.

PPE

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance

BROWN TO BLACK LIQUID

Solubility (Water)

SOLUBLE

Odour

SLIGHT ODOUR

Specific Gravity

1.08

pH

1.5 to 2.0

% Volatiles

NOT AVAILABLE

Vapour Pressure

NOT AVAILABLE

Flammability

NON FLAMMABLE

Vapour Density

NOT AVAILABLE

Flash Point

NOT RELEVANT

Boiling Point

NOT AVAILABLE

Upper Explosion Limit

NOT RELEVANT

Melting Point

NOT AVAILABLE

Lower Explosion Limit

NOT RELEVANT

Evaporation Rate

NOT AVAILABLE

Page 2 of 5

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010

IDEDEX TEAT DIP & SPRAY

Product Name

Chemical Stability

Stable under recommended conditions of storage.

Conditions to Avoid

Avoid heat, sparks, open flames and other ignition sources.

10. STABILITY AND REACTIVITY

Material to Avoid

Incompatible with acetaldehyde, chlorine, fluorine, ammonia, metals and reducing agents (eg.

phosphorus).

Decomposition

May evolve toxic gases (iodides) when heated to decomposition.

Hazardous Reactions

Hazardous polymerization is not expected to occur.

Health Hazard

Summary

Chronic exposure may result in iodism, with symptoms of thyroid damage, rapid heart beat, tremor, weight loss,

diarrhoea, insomnia, eye irritation, bronchitis and skin rash. Use safe work practices to avoid eye or skin contact

and vapour/mist generation - inhalation.

Eye

Contact may result in irritation, lacrimation, pain, redness and conjunctivitis. May result in burns with prolonged

contact.

Inhalation

Over exposure to vapours may result in irritation of the nose and throat, with coughing. High level exposure may

result in chronic throat irritation. Due to product form / nature of use, an inhalation hazard is not anticipated with

normal use.

Skin

Contact may result in irritation, redness, rash and dermatitis. May cause skin lesions or eruptions in severe cases.

May cause sensitisation by skin contact.

Ingestion

Ingestion of large quantities may result in nausea, vomiting and gastrointestinal irritation. Chronic exposure may

result in liver, kidney and blood damage.

Toxicity Data

IODINE (7553-56-2)

LCLo (Inhalation): 137 ppm.1 hour (rat)

LD50 (Ingestion): 14000 mg/kg (rat)

LD50 (Subcutaneous): 10500 mg/kg (rat)

LDLo (Ingestion): 28 mg/kg (human)

LDLo (Intravenous): 40 mg/kg (dog)

LDLo (Subcutaneous): 175 mg/kg (rabbit)

TDLo (Ingestion): 26 mg/kg/1 year-intermittent (women)

PHOSPHORIC ACID (7664-38-2)

LD50 (Ingestion): 1530 mg/kg (rat)

LD50 (Skin): 2740 mg/kg (rabbit)

11. TOXICOLOGICAL INFORMATION

Environment

Limited ecotoxicity data was available for this product at the time this report was prepared. Ensure appropriate

measures are taken to prevent this product from entering the environment.

12. ECOLOGICAL INFORMATION

Waste Disposal

Add to a large volume of reducing solution (eg thiosulphate, metabisulphite, but not carbon, sulphur or strong

reducer) and acidify with 3M sulphuric acid. When reduction is complete, add mixture to water and neutralise.

Absorb with sand or similar non-combustible material and dispose of to an approved landfill site. Contact the

manufacturer for additional information.

Legislation

Dispose of in accordance with relevant local legislation.

13. DISPOSAL CONSIDERATIONS

14. TRANSPORT INFORMATION

NOT CLASSIFIED AS A DANGEROUS GOOD BY THE CRITERIA OF THE ADG CODE

None Allocated

None Allocated

None Allocated

None Allocated

None Allocated

None Allocated

Shipping Name

UN No.

Packing Group

DG Class

Hazchem Code

Subsidiary Risk(s)

EPG

None Allocated

Poison Schedule

A poison schedule number has not been allocated to this product using the criteria in the Standard for the Uniform

Scheduling of Drugs and Poisons (SUSDP).

AICS

All chemicals listed on the Australian Inventory of Chemical Substances (AICS).

15. REGULATORY INFORMATION

Page 3 of 5

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010

IDEDEX TEAT DIP & SPRAY

Product Name

Additional

Information

RESPIRATORS: In general the use of respirators should be limited and engineering controls employed to avoid

exposure. If respiratory equipment must be worn ensure correct respirator selection and training is undertaken.

Remember that some respirators may be extremely uncomfortable when used for long periods. The use of air

powered or air supplied respirators should be considered where prolonged or repeated use is necessary.

EXPOSURE STANDARDS - TIME WEIGHTED AVERAGE (TWA) or WES (WORKPLACE EXPOSURE

STANDARD) (NZ): Exposure standards are established on the premise of an 8 hour work period of normal

intensity, under normal climatic conditions and where a 16 hour break between shifts exists to enable the body to

eliminate absorbed contaminants. In the following circumstances, exposure standards must be reduced: strenuous

work conditions; hot, humid climates; high altitude conditions; extended shifts (which increase the exposure period

and shorten the period of recuperation).

ABBREVIATIONS:

ADB - Air-Dry Basis.

BEI - Biological Exposure Indice(s)

CAS# - Chemical Abstract Service number - used to uniquely identify chemical compounds.

CNS - Central Nervous System.

EINECS - European INventory of Existing Commercial chemical Substances.

IARC - International Agency for Research on Cancer.

M - moles per litre, a unit of concentration.

mg/m3 - Milligrams per cubic metre.

NOS - Not Otherwise Specified.

NTP - National Toxicology Program.

OSHA - Occupational Safety and Health Administration.

pH - relates to hydrogen ion concentration using a scale of 0 (high acidic) to 14 (highly alkaline).

ppm - Parts Per Million.

RTECS - Registry of Toxic Effects of Chemical Substances.

TWA/ES - Time Weighted Average or Exposure Standard.

HEALTH EFFECTS FROM EXPOSURE:

It should be noted that the effects from exposure to this product will depend on several factors including: frequency

and duration of use; quantity used; effectiveness of control measures; protective equipment used and method of

application. Given that it is impractical to prepare a Chem Alert report which would encompass all possible

scenarios, it is anticipated that users will assess the risks and apply control methods where appropriate.

PERSONAL PROTECTIVE EQUIPMENT GUIDELINES:

The recommendation for protective equipment contained within this Chem Alert report is provided as a guide only.

Factors such as method of application, working environment, quantity used, product concentration and the

availability of engineering controls should be considered before final selection of personal protective equipment is

made.

16. OTHER INFORMATION

Report Status

This document has been compiled by RMT on behalf of the manufacturer of the product and serves as the

manufacturer's Safety Data Sheet ('SDS').

It is based on information concerning the product which has been provided to RMT by the manufacturer or

obtained from third party sources and is believed to represent the current state of knowledge as to the appropriate

safety and handling precautions for the product at the time of issue. Further clarification regarding any aspect of

the product should be obtained directly from the manufacturer.

While RMT has taken all due care to include accurate and up-to-date information in this SDS, it does not provide

any warranty as to accuracy or completeness. As far as lawfully possible, RMT accepts no liability for any loss,

injury or damage (including consequential loss) which may be suffered or incurred by any person as a

consequence of their reliance on the information contained in this SDS.

Prepared By

Risk Management Technologies

5 Ventnor Ave, West Perth

Western Australia 6005

Phone: +61 8 9322 1711

Fax: +61 8 9322 1794

Email: info@rmt.com.au

Web: www.rmt.com.au

Page 4 of 5

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010

IDEDEX TEAT DIP & SPRAY

Product Name

07 Sep 2007

End of Report

SDS Date:

Page 5 of 5

Reviewed: 28 Sep 2007

Printed: 14 Jan 2010

Similar products

Search alerts related to this product

View documents history

Share this information