INCIMAXX DES

Основна информация

  • Търговско наименование:
  • INCIMAXX DES (117011E)
  • Използвай за:
  • Хората
  • Вид на лекарството:
  • Медицински устройство

Документи

Локализация

  • Предлага се в:
  • INCIMAXX DES (117011E)
    Ирландия
  • Език:
  • английски

Състояние

  • Източник:
  • Ecolab
  • Номер на разрешението:
  • 117011E
  • Последна актуализация:
  • 12-03-2018

кратка характеристика на продукта: дозировка, взаимодействия, странични ефекти.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

1 / 17

Section: 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE

COMPANY/UNDERTAKING

1.1 Product identifier

Product name

InciMaxx Des

Product code

117011E

Use of the

Substance/Mixture

Biocide

Substance type:

Mixture

For professional users only.

Product dilution information

No dilution information provided.

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses

Biocide. Spray and rinse manual process

Recommended restrictions

on use

Reserved for industrial and professional use.

1.3 Details of the supplier of the safety data sheet

Company

Ecolab Ltd.

PO Box 11; Winnington Avenue

Northwich, Cheshire, United Kingdom CW8 4DX

+353 (0)1 276 3500

ccs@ecolab.com

1.4 Emergency telephone number

Emergency telephone

number

+353 (0)1 276 3500

Poison Information Centre

telephone number

For medical professionals only:

+353 (0)1 837 9964 (8am-10pm)

Date of Compilation/Revision

02.06.2017

Version

Section: 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture

Classification (REGULATION (EC) No 1272/2008)

Oxidizing liquids, Category 2

H272

Corrosive to metals, Category 1

H290

Skin corrosion, Category 1A

H314

Serious eye damage, Category 1

H318

Specific target organ toxicity - single exposure, Category 3,

Respiratory system

H335

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

2 / 17

Chronic aquatic toxicity, Category 2

H411

The classification of this product is based only on its extreme pH value (in accordance with current

European legislation).

2.2 Label elements

Labelling (REGULATION (EC) No 1272/2008)

Hazard pictograms

Signal Word

Danger

Hazard Statements

H272

May intensify fire; oxidiser.

H290

May be corrosive to metals.

H314

Causes severe skin burns and eye damage.

H411

Toxic to aquatic life with long lasting effects.

Supplemental Hazard

Statements

EUH071

Corrosive to the respiratory tract.

Precautionary Statements

Prevention:

P210

Keep away from heat, hot surfaces, sparks,

open flames and other ignition sources. No

smoking.

P221

Take any precaution to avoid mixing with

combustibles.

P273

Avoid release to the environment.

P280

Wear protective gloves/ eye protection/ face

protection.

Response:

P303 + P361 + P353

IF ON SKIN (or hair): Take off immediately

all contaminated clothing. Rinse skin with

water/shower.

P305 + P351 + P338

IF IN EYES: Rinse cautiously with water

for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing.

P310

Immediately call a POISON CENTER/doctor.

Hazardous components which must be listed on the label:

Acetic acid

Hydrogen peroxide

Peroxyacetic acid

2.3 Other hazards

Do not mix with bleach or other chlorinated products – will cause chlorine gas.

Section: 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.2 Mixtures

Hazardous components

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

3 / 17

Chemical Name

CAS-No.

EC-No.

REACH No.

ClassificationREGULATION (EC) No

1272/2008

Concentration:

Acetic acid

64-19-7

200-580-7

01-2119475328-30

Nota B Flammable liquids Category 3;

H226

Skin corrosion Category 1A; H314

>= 10 - < 20

Hydrogen peroxide

7722-84-1

231-765-0

01-2119485845-22

Nota B Oxidizing liquids Category 1;

H271

Acute toxicity Category 4; H302

Acute toxicity Category 4; H332

Skin corrosion Category 1A; H314

>= 5 - < 8

alkylethersulphates

68891-38-3

500-234-8

01-2119488639-16

Skin irritation Category 2; H315

Serious eye damage Category 1; H318

Chronic aquatic toxicity Category 3;

H412

>= 3 - < 5

Peroxyacetic acid

79-21-0

201-186-8

Flammable liquids Category 3; H226

Organic peroxides Type D; H242

Acute toxicity Category 4; H302

Acute toxicity Category 4; H332

Acute toxicity Category 4; H312

Skin corrosion Category 1A; H314

Acute aquatic toxicity Category 1; H400

Specific target organ toxicity - single

exposure Category 3; H335

Chronic aquatic toxicity Category 1;

H410

>= 1 - < 2.5

octanoic acid

124-07-2

204-677-5

01-2119552491-41

Acute toxicity Category 4; H332

Skin corrosion Category 1C; H314

Serious eye damage Category 1; H318

>= 1 - < 2.5

Peroxyoctanoic acid

33734-57-5

Pyrophoric liquids Category 1; H250

Oxidizing liquids Category 1; H271

Organic peroxides Type F; H242

Skin corrosion Category 1B; H314

Serious eye damage Category 1; H318

Acute aquatic toxicity Category 1; H400

>= 0.1 - < 0.25

For the full text of the H-Statements mentioned in this Section, see Section 16.

Section: 4. FIRST AID MEASURES

4.1 Description of first aid measures

In case of eye contact

Rinse immediately with plenty of water, also under the eyelids, for

at least 15 minutes. Remove contact lenses, if present and easy

to do. Continue rinsing. Get medical attention immediately.

In case of skin contact

Wash off immediately with plenty of water for at least 15 minutes.

Use a mild soap if available. Wash clothing before reuse.

Thoroughly clean shoes before reuse. Get medical attention

immediately.

If swallowed

Rinse mouth with water. Do NOT induce vomiting. Never give

anything by mouth to an unconscious person. Get medical

attention immediately.

If inhaled

Remove to fresh air. Treat symptomatically. Get medical attention

if symptoms occur.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

4 / 17

4.2 Most important symptoms and effects, both acute and delayed

See Section 11 for more detailed information on health effects and symptoms.

4.3 Indication of immediate medical attention and special treatment needed

Treatment

Treat symptomatically.

Section: 5. FIREFIGHTING MEASURES

5.1 Extinguishing media

Suitable extinguishing media

Use extinguishing measures that are appropriate to local

circumstances and the surrounding environment.

Unsuitable extinguishing

media

None known.

5.2 Special hazards arising from the substance or mixture

Specific hazards during

firefighting

Fire Hazard

Keep away from heat and sources of ignition.

Flash back possible over considerable distance.

Special protective equipment for firefighters

Oxidizer. Contact with other material may cause fire.

Oxidizer; material is an oxidizer which may readily react with other

materials, especially upon heating.

Hazardous combustion

products

Decomposition products may include the following materials:

Carbon oxides

nitrogen oxides (NOx)

Sulphur oxides

Oxides of phosphorus

5.3 Advice for firefighters

Special protective equipment

for firefighters

: In case of fire, wear a full face positive-pressure self contained

breathing apparatus and protective suit.

Further information

: Use water spray to cool unopened containers. Collect

contaminated fire extinguishing water separately. This must not be

discharged into drains. Fire residues and contaminated fire

extinguishing water must be disposed of in accordance with local

regulations. In the event of fire and/or explosion do not breathe

fumes.

Section: 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures

Advice for non-emergency

personnel

Ensure adequate ventilation. Remove all sources of ignition. Keep

people away from and upwind of spill/leak. Avoid inhalation,

ingestion and contact with skin and eyes. When workers are

facing concentrations above the exposure limit they must use

appropriate certified respirators. Ensure clean-up is conducted by

trained personnel only. Refer to protective measures listed in

sections 7 and 8.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

5 / 17

Advice for emergency

responders

If specialised clothing is required to deal with the spillage, take

note of any information in Section 8 on suitable and unsuitable

materials.

6.2 Environmental precautions

Environmental precautions

Do not allow contact with soil, surface or ground water.

6.3 Methods and materials for containment and cleaning up

Methods for cleaning up

Eliminate all ignition sources if safe to do so. Stop leak if safe to

do so. Never soak up spilled or leaked acids and bases with

sawdust, wood chips or similar materials. Isolate the waste do not

allow it to come into contact with incompatible materials. For small

spills contain with sand or vermiculite and dilute the contained

product at least 10 times with water. Transfer to an open topped

container and remove to a safe place for neutralization* / disposal.

For large spills contain spill and evacuate the area, leave until the

reaction subsides, then collect up for disposal. Obtain consent

from the local water company / authority if considering discharge

to sewer. *NEUTRALIZATION : once diluted, neutralize with a

suitable alkali such as sodium bicarbonate.

6.4 Reference to other sections

See Section 1 for emergency contact information.

For personal protection see section 8.

See Section 13 for additional waste treatment information.

Section: 7. HANDLING AND STORAGE

7.1 Precautions for safe handling

Advice on safe handling

Do not ingest. Do not get in eyes, on skin, or on clothing. Do not

breathe dust/fume/gas/mist/vapours/spray. Use only with

adequate ventilation. Keep away from fire, sparks and heated

surfaces. Take necessary action to avoid static electricity

discharge (which might cause ignition of organic vapours). Wash

hands thoroughly after handling. Do not mix with bleach or other

chlorinated products – will cause chlorine gas.

Hygiene measures

Handle in accordance with good industrial hygiene and safety

practice. Remove and wash contaminated clothing before re-use.

Wash face, hands and any exposed skin thoroughly after

handling. Provide suitable facilities for quick drenching or flushing

of the eyes and body in case of contact or splash hazard.

7.2 Conditions for safe storage, including any incompatibilities

Requirements for storage

areas and containers

Keep away from heat and sources of ignition. Keep in a cool, well-

ventilated place. Keep away from oxidizing agents. Keep away

from reducing agents. Keep away from strong bases. Keep away

from combustible material. Keep out of reach of children. Keep

container tightly closed. Store in suitable labeled containers.

Pressure bursts may occur due to gas evolution if the container is

not adequately vented.

Keep only in original container. Absorb spillage to prevent material

damage.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

6 / 17

Storage temperature

0 °C to 25 °C

Packaging material

Suitable material: Plastic material

Unsuitable material: Aluminium, Mild steel

7.3 Specific end uses

Specific use(s)

Biocide. Spray and rinse manual process

Section: 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters

Occupational Exposure Limits

Components

CAS-No.

Value type (Form

of exposure)

Control parameters

Basis

Acetic acid

64-19-7

OELV - 15 min

(STEL)

15 ppm

37 mg/m3

IR_OEL

Further information

IOEL

Indicative Occupational Exposure Limit Value

OELV - 8 hrs

(TWA)

10 ppm

25 mg/m3

IR_OEL

Further information

IOEL

Indicative Occupational Exposure Limit Value

Hydrogen peroxide

7722-84-1

OELV - 15 min

(STEL)

2 ppm

3 mg/m3

IR_OEL

OELV - 8 hrs

(TWA)

1 ppm

1.5 mg/m3

IR_OEL

DNEL

Hydrogen peroxide

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Short-term - local

Value: 3 mg/m3

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Long-term local effects

Value: 1.4 mg/m3

Alkylethersulphates

End Use: Workers

Exposure routes: Dermal

Potential health effects: Long-term systemic effects

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Long-term systemic effects

Value: 175 mg/m3

peracetic acid

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Long-term systemic effects

Value: 0.6 mg/m3

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Acute systemic effects

Value: 0.6 mg/m3

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

7 / 17

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Long-term local effects

Value: 0.6 mg/m3

End Use: Workers

Exposure routes: Inhalation

Potential health effects: Acute local effects

Value: 0.6 mg/m3

End Use: Workers

Exposure routes: Skin contact

Potential health effects: Acute local effects

Value: 0.12

End Use: Consumers

Exposure routes: Inhalation

Potential health effects: Long-term systemic effects

Value: 0.6 mg/m3

End Use: Consumers

Exposure routes: Inhalation

Potential health effects: Acute systemic effects

Value: 0.6 mg/m3

End Use: Consumers

Exposure routes: Inhalation

Potential health effects: Long-term local effects

Value: 0.6 mg/m3

End Use: Consumers

Exposure routes: Inhalation

Potential health effects: Acute local effects

Value: 0.3 mg/m3

PNEC

Alkylethersulphates

Fresh water

Value: 0.24 mg/l

Marine water

Value: 0.024 mg/l

Intermittent use/release

Value: 0.071 mg/l

Sewage treatment plant

Value: 10000 mg/l

Fresh water sediment

Value: 5.45 mg/kg

Marine sediment

Value: 0.545 mg/kg

Soil

Value: 0.946 mg/kg

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

8 / 17

peracetic acid

Fresh water

Value: 0.000224 mg/l

Fresh water sediment

Value: 0.00018 mg/kg

Water

Value: 0.051 mg/l

Soil

Value: 0.32 mg/kg

8.2 Exposure controls

Appropriate engineering controls

Engineering measures

Effective exhaust ventilation system. Maintain air concentrations

below occupational exposure standards.

Individual protection measures

Hygiene measures

Handle in accordance with good industrial hygiene and safety

practice. Remove and wash contaminated clothing before re-use.

Wash face, hands and any exposed skin thoroughly after

handling. Provide suitable facilities for quick drenching or flushing

of the eyes and body in case of contact or splash hazard.

Eye/face protection (EN 166)

Safety goggles

Face-shield

Hand protection (EN 374)

Recommended preventive skin protection

Gloves

Nitrile rubber

butyl-rubber

Breakthrough time: 1 – 4 hours

Minimum thickness for butyl-rubber 0.7 mm for nitrile rubber 0.4

mm or equivalent (please refer to the gloves

manufacturer/distributor for advise).

Gloves should be discarded and replaced if there is any indication

of degradation or chemical breakthrough.

Skin and body protection

(EN 14605)

Personal protective equipment comprising: suitable protective

gloves, safety goggles and protective clothing

Respiratory protection (EN

143, 14387)

None required if airborne concentrations are maintained below the

exposure limit listed in Exposure Limit Information. Use certified

respiratory protection equipment meeting EU

requirements(89/656/EEC, 89/686/EEC ), or equivalent, when

respiratory risks cannot be avoided or sufficiently limited by

technical means of collective protection or by measures, methods

or procedures of work organization.

Environmental exposure controls

General advice

: Consider the provision of containment around storage vessels.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

9 / 17

Section: 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties

Appearance

: liquid

Colour

: colourless

Odour

: pungent

1.0 - 1.5, 100 %

Flash point

88 °C closed cup

Odour Threshold

Not applicable and/or not determined for the mixture

Melting point/freezing point

Not applicable and/or not determined for the mixture

Initial boiling point and

boiling range

Not applicable and/or not determined for the mixture

Evaporation rate

Not applicable and/or not determined for the mixture

Flammability (solid, gas)

Not applicable and/or not determined for the mixture

Upper explosion limit

Not applicable and/or not determined for the mixture

Lower explosion limit

Not applicable and/or not determined for the mixture

Vapour pressure

Not applicable and/or not determined for the mixture

Relative vapour density

Not applicable and/or not determined for the mixture

Relative density

1.04 - 1.06

Water solubility

soluble

Solubility in other solvents

Not applicable and/or not determined for the mixture

Partition coefficient: n-

octanol/water

Not applicable and/or not determined for the mixture

Auto-ignition temperature

Not applicable and/or not determined for the mixture

Thermal decomposition

Not applicable and/or not determined for the mixture

Viscosity, kinematic

Not applicable and/or not determined for the mixture

Explosive properties

Not applicable and/or not determined for the mixture

Oxidizing properties

9.2 Other information

Not applicable and/or not determined for the mixture

Section: 10. STABILITY AND REACTIVITY

10.1 Reactivity

No dangerous reaction known under conditions of normal use.

10.2 Chemical stability

Stable under normal conditions.

10.3 Possibility of hazardous reactions

Do not mix with bleach or other chlorinated products – will cause chlorine gas.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

10 / 17

10.4 Conditions to avoid

Heat, flames and sparks.

Direct sources of heat.

Exposure to sunlight.

10.5 Incompatible materials

Bases

Metals

Organic materials

Aluminium

Mild steel

10.6 Hazardous decomposition products

Decomposition products may include the following materials:

Carbon oxides

nitrogen oxides (NOx)

Sulphur oxides

Oxides of phosphorus

Section: 11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects

Information on likely routes of

exposure

Inhalation, Eye contact, Skin contact

Product

Acute oral toxicity

: Acute toxicity estimate : > 2,000 mg/kg

Acute inhalation toxicity

: 4 h Acute toxicity estimate : > 5 mg/l

Acute dermal toxicity

: Acute toxicity estimate : > 2,000 mg/kg

Skin corrosion/irritation

: There is no data available for this product.

Serious eye damage/eye

irritation

: There is no data available for this product.

Respiratory or skin

sensitization

: There is no data available for this product.

Carcinogenicity

: There is no data available for this product.

Reproductive effects

: There is no data available for this product.

Germ cell mutagenicity

: There is no data available for this product.

Teratogenicity

: There is no data available for this product.

STOT - single exposure

: There is no data available for this product.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

11 / 17

STOT - repeated exposure

: There is no data available for this product.

Aspiration toxicity

: There is no data available for this product.

Components

Acute oral toxicity

: Acetic acid

LD50 rat: 3,310 mg/kg

Hydrogen peroxide

LD50 rat: 486 mg/kg

alkylethersulphates

LD50 rat: 3,350 mg/kg

octanoic acid

LD50 rat: 2,000 mg/kg

Peroxyoctanoic acid

LD50 rat: 2,000 mg/kg

Components

Acute inhalation toxicity

: Peroxyacetic acid

4 h LC50 rat: 1.5 mg/l

octanoic acid

4 h LC50 rat: 4.6 mg/l

Components

Acute dermal toxicity

: Acetic acid

LD50 rabbit: 1,060 mg/kg

alkylethersulphates

LD50 rabbit: 8,000 mg/kg

octanoic acid

LD50 rabbit: 5,000 mg/kg

Potential Health Effects

Eyes

Causes serious eye damage.

Skin

Causes severe skin burns.

Ingestion

Causes digestive tract burns.

Inhalation

May cause nose, throat, and lung irritation.

Chronic Exposure

Health injuries are not known or expected under normal use.

Experience with human exposure

Eye contact

Redness, Pain, Corrosion

Skin contact

Redness, Pain, Corrosion

Ingestion

Corrosion, Abdominal pain

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

12 / 17

Inhalation

Respiratory irritation, Cough

Section: 12. ECOLOGICAL INFORMATION

12.1 Ecotoxicity

Environmental Effects

Toxic to aquatic life with long lasting effects.

Product

Toxicity to fish

: no data available

Toxicity to daphnia and other

aquatic invertebrates

: no data available

Toxicity to algae

: no data available

Components

Toxicity to fish

: Acetic acid

96 h LC50 Oncorhynchus mykiss (rainbow trout): 1,000 mg/l

alkylethersulphates

96 h LC50 Fish: 7.1 mg/l

Peroxyacetic acid

96 h LC50: 0.8 mg/l

octanoic acid

96 h LC50 Fish: 22 mg/l

Peroxyoctanoic acid

96 h LC50 Fish: 0.15 mg/l

Components

Toxicity to daphnia and other

aquatic invertebrates

: Acetic acid

48 h EC50 Daphnia magna (Water flea): 39.6 mg/l

Peroxyacetic acid

48 h EC50: 0.73 mg/l

Components

Toxicity to algae

: Acetic acid

72 h EC50 Skeletonema costatum (marine diatom): 1,000 mg/l

Hydrogen peroxide

72 h EC50: 1.38 mg/l

Peroxyacetic acid

72 h EC50: 0.7 mg/l

12.2 Persistence and degradability

Product

Biodegradability

: The surfactants contained in the product are biodegradable

according to the requirements of the detergent regulation

648/2004/EC

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

13 / 17

Components

Biodegradability

Acetic acid

Result: Readily biodegradable.

Hydrogen peroxide

Result: Not applicable - inorganic

alkylethersulphates

Result: Readily biodegradable.

Peroxyacetic acid

Result: Readily biodegradable.

octanoic acid

Result: Readily biodegradable.

Peroxyoctanoic acid

Result: Readily biodegradable.

12.3 Bioaccumulative potential

no data available

12.4 Mobility in soil

no data available

12.5 Results of PBT and vPvB assessment

Product

Assessment

This substance/mixture contains no components considered to be

either persistent, bioaccumulative and toxic (PBT), or very

persistent and very bioaccumulative (vPvB) at levels of 0.1% or

higher.

12.6 Other adverse effects

no data available

Section: 13. DISPOSAL CONSIDERATIONS

Dispose of in accordance with the European Directives on waste and hazardous waste.Waste

codes should be assigned by the user, preferably in discussion with the waste disposal authorities.

13.1 Waste treatment methods

Product

: The product should not be allowed to enter drains, water courses

or the soil. Where possible recycling is preferred to disposal or

incineration. If recycling is not practicable, dispose of in

compliance with local regulations. Dispose of wastes in an

approved waste disposal facility.

Contaminated packaging

: Dispose of as unused product. Empty containers should be taken

to an approved waste handling site for recycling or disposal. Do

not re-use empty containers. Dispose of in accordance with local,

state, and federal regulations.

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

14 / 17

Guidance for Waste Code

selection

: Organic wastes containing dangerous substances. If this product

is used in any further processes, the final user must redefine and

assign the most appropriate European Waste Catalogue Code. It

is the responsibility of the waste generator to determine the

toxicity and physical properties of the material generated to

determine the proper waste identification and disposal methods in

compliance with applicable European (EU Directive 2008/98/EC)

and local regulations.

Section: 14. TRANSPORT INFORMATION

The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are

in compliance with the selected mode of transport.

Land transport (ADR/ADN/RID)

14.1 UN number

3149

14.2 UN proper shipping

name

HYDROGEN PEROXIDE AND PEROXYACETIC ACID

MIXTURE, STABILIZED

14.3 Transport hazard

class(es)

5.1 (8)

14.4 Packing group

14.5 Environmental hazards

14.6 Special precautions for

user

None

Air transport (IATA)

14.1 UN number

3149

14.2 UN proper shipping

name

Hydrogen peroxide and peroxyacetic acid mixture stabilized

14.3 Transport hazard

class(es)

5.1 (8)

14.4 Packing group

14.5 Environmental hazards

14.6 Special precautions for

user

None

Sea transport (IMDG/IMO)

14.1 UN number

3149

14.2 UN proper shipping

name

HYDROGEN PEROXIDE AND PEROXYACETIC ACID

MIXTURE, STABILIZED

14.3 Transport hazard

class(es)

5.1 (8)

14.4 Packing group

14.5 Environmental hazards

14.6 Special precautions for

user

None

14.7 Transport in bulk

according to Annex II of

MARPOL 73/78 and the IBC

Code

Not applicable.

Section: 15. REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

15 / 17

according to Detergents

Regulation EC 648/2004

5 % or over but less than 15 %: Oxygen-based bleaching agents

Contains: Disinfectants

less than 5 %: Anionic surfactants

National Regulations

Take note of Dir 94/33/EC on the protection of young people at work.

Other regulations

Safety, Health and Welfare at Work Act, 2005

European Communities (Classification, Packaging, Labelling and

Notification of Dangerous Preparations) Regulations 1995. (S.I.

272 of 1995) as amended

15.2 Chemical Safety Assessment

This product contains substances for which Chemical Safety Assessments are still required.

Section: 16. OTHER INFORMATION

Procedure used to derive the classification according to REGULATION (EC) No 1272/2008

Classification

Justification

Oxidizing liquids 2, H272

On basis of test data.

Corrosive to metals 1, H290

On basis of test data.

Skin corrosion 1A, H314

On basis of test data.

Serious eye damage 1, H318

On basis of test data.

Specific target organ toxicity - single exposure

3, H335

Calculation method

Chronic aquatic toxicity 2, H411

Calculation method

Full text of H-Statements

H226

Flammable liquid and vapour.

H242

Heating may cause a fire.

H250

Catches fire spontaneously if exposed to air.

H271

May cause fire or explosion; strong oxidiser.

H302

Harmful if swallowed.

H312

Harmful in contact with skin.

H314

Causes severe skin burns and eye damage.

H315

Causes skin irritation.

H318

Causes serious eye damage.

H332

Harmful if inhaled.

H335

May cause respiratory irritation.

H400

Very toxic to aquatic life.

H410

Very toxic to aquatic life with long lasting effects.

H412

Harmful to aquatic life with long lasting effects.

Full text of other abbreviations

ADN – European Agreement concerning the International Carriage of Dangerous Goods by

Inland Waterways; ADR – European Agreement concerning the International Carriage of

Dangerous Goods by Road; AICS – Australian Inventory of Chemical Substances; ASTM –

American Society for the Testing of Materials; bw – Body weight; CLP – Classification Labelling

Packaging Regulation; Regulation (EC) No 1272/2008; CMR – Carcinogen, Mutagen or

Reproductive Toxicant; DIN – Standard of the German Institute for Standardisation; DSL –

Domestic Substances List (Canada); ECHA – European Chemicals Agency; EC-Number –

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

16 / 17

European Community number; ECx – Concentration associated with x% response; ELx – Loading

rate associated with x% response; EmS – Emergency Schedule; ENCS – Existing and New

Chemical Substances (Japan); ErCx – Concentration associated with x% growth rate response;

GHS – Globally Harmonized System; GLP – Good Laboratory Practice; IARC – International

Agency for Research on Cancer; IATA – International Air Transport Association; IBC –

International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in

Bulk; IC50 – Half maximal inhibitory concentration; ICAO – International Civil Aviation

Organization; IECSC – Inventory of Existing Chemical Substances in China; IMDG – International

Maritime Dangerous Goods; IMO – International Maritime Organization; ISHL – Industrial Safety

and Health Law (Japan); ISO – International Organisation for Standardization; KECI – Korea

Existing Chemicals Inventory; LC50 – Lethal Concentration to 50 % of a test population; LD50 –

Lethal Dose to 50% of a test population (Median Lethal Dose); MARPOL – International

Convention for the Prevention of Pollution from Ships; n.o.s. – Not Otherwise Specified; NO(A)EC

– No Observed (Adverse) Effect Concentration; NO(A)EL – No Observed (Adverse) Effect Level;

NOELR – No Observable Effect Loading Rate; NZIoC – New Zealand Inventory of Chemicals;

OECD – Organization for Economic Co-operation and Development; OPPTS – Office of Chemical

Safety and Pollution Prevention; PBT – Persistent, Bioaccumulative and Toxic substance; PICCS

– Philippines Inventory of Chemicals and Chemical Substances; (Q)SAR – (Quantitative)

Structure Activity Relationship; REACH – Regulation (EC) No 1907/2006 of the European

Parliament and of the Council concerning the Registration, Evaluation, Authorisation and

Restriction of Chemicals; RID – Regulations concerning the International Carriage of Dangerous

Goods by Rail; SADT – Self-Accelerating Decomposition Temperature; SDS – Safety Data Sheet;

TCSI – Taiwan Chemical Substance Inventory; TRGS – Technical Rule for Hazardous

Substances; TSCA – Toxic Substances Control Act (United States); UN – United Nations; vPvB –

Very Persistent and Very Bioaccumulative

Prepared by

Regulatory Affairs

Numbers quoted in the MSDS are given in the format: 1,000,000 = 1 million and 1,000 = 1

thousand. 0.1 = 1 tenth and 0.001 = 1 thousandth

REVISED INFORMATION: Significant changes to regulatory or health information for this revision

is indicated by a bar in the left-hand margin of the SDS.

The information provided in this Safety Data Sheet is correct to the best of our knowledge,

information and belief at the date of its publication. The information given is designed only as a

guidance for safe handling, use, processing, storage, transportation, disposal and release and is

not to be considered a warranty or quality specification. The information relates only to the specific

material designated and may not be valid for such material used in combination with any other

materials or in any process, unless specified in the text.

ANNEX: EXPOSURE SCENARIOS

DPD+ Substances:

The following substances are the lead substances that contribute to the mixture Exposure

Scenario according to the DPD+ Rule:

Route

Substance

CAS-No.

EINECS-No.

Ingestion

Acetic acid

64-19-7

200-580-7

Inhalation

Acetic acid

64-19-7

200-580-7

Dermal

Acetic acid

64-19-7

200-580-7

SAFETY DATA SHEET

according to Regulation (EC) No. 1907/2006

InciMaxx Des

117011E

17 / 17

Eyes

Acetic acid

64-19-7

200-580-7

aquatic environment

Peroxyacetic acid

79-21-0

201-186-8

Physical properties DPD+ Substances:

Substance

Vapour pressure

Water solubility

Pow

Molar Mass

Acetic acid

2.079 kPa

60.06 g/mol

Peroxyacetic acid

0.217 Pa

76.0 g/mol

To calculate if your downstream Operating Conditions and Risk management Measures are

safe, please calculate your risk factor at the website below:

www.ecetoc.org/tra

Short title of Exposure

Scenario

Biocide. Spray and rinse manual process

Use descriptors

Main User Groups

Professional uses: Public domain (administration, education,

entertainment, services, craftsmen)

Sectors of end-use

SU22: Professional uses: Public domain (administration,

education, entertainment, services, craftsmen)

Process categories

PROC11: Non industrial spraying

PROC8a: Transfer of substance or preparation (charging/

discharging) from/ to vessels/ large containers at non-dedicated

facilities

Product categories

PC35: Washing and cleaning products (including solvent based

products)

Environmental Release

Categories

ERC8a: Wide dispersive indoor use of processing aids in open

systems