AC-BPL

Основна информация

  • Търговско наименование:
  • AC-BPL
  • Използвай за:
  • Хората
  • Вид на лекарството:
  • Медицински устройство

Документи

Локализация

  • Предлага се в:
  • AC-BPL
    Ирландия
  • Език:
  • английски

Състояние

  • Източник:
  • Ecolab
  • Номер на разрешението:
  • 115006E
  • Последна актуализация:
  • 12-03-2018

кратка характеристика на продукта: дозировка, взаимодействия, странични ефекти.

AC-BPL

SAFETY DATA SHEET

Product name

AC-BPL

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II (453/2010) - Europe

:

1.1 Product identifier

1.3 Details of the supplier of the safety data sheet

1.2 Relevant identified uses of the substance or mixture and uses advised against

Identified uses

SECTION 1: Identification of the substance/mixture and of the company/

undertaking

Product code

:

Uses advised against

1.4 Emergency telephone number

National advisory body/Poison Centre

Process cleaner. Cleaning In place (CIP) process

None known.

Ecolab Ltd.

La Vallee House

Upper Dargle Road

Bray

Co. Wicklow

Ireland

Tel +353 (0)1 276 3500

Fax + 353 (0)1 2761900

infoireland@ecolab.com

:

Manufacturer/ Distributor/

Importer

115006E

Product use

:

Cleaning product

Product is for professional use only

Manufacturer/ Distributor/ Importer

:

Telephone number

01 8379964 (For professionals only)

:

Telephone number

01 276 3500 (8.30 to 17.00 Monday to Friday (excluding public holidays))

Version

: 2

Classification

C; R35

:

:

Human health hazards

Causes severe burns.

See Section 11 for more detailed information on health effects and symptoms.

Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Product definition

:

Mixture

See Section 16 for the full text of the R phrases or H statements declared above.

Classification according to Directive 1999/45/EC [DPD]

The product is classified as dangerous according to Directive 1999/45/EC and its amendments.

2.2 Label elements

Hazard pictograms

:

Skin Corr. 1, H314

Date of issue/Date of revision

:

1/11

7 November 2013

AC-BPL

SECTION 2: Hazards identification

:

Other hazards which do

not result in classification

Signal word

:

Hazard statements

:

Prevention

:

Precautionary statements

Response

:

Danger

P280 - Wear protective gloves and eye/face protection.

P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated

clothing. Rinse skin with water or shower.

P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes.

Remove contact lenses, if present and easy to do. Continue rinsing.

P310 - Immediately call a POISON CENTER or doctor/physician.

2.3 Other hazards

Contains

:

Not applicable.

Sodium hydroxide

H314

Causes severe skin burns and eye damage.

Occupational exposure limits, if available, are listed in Section 8.

There are no additional ingredients present which, within the current knowledge of the supplier and in the

concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this

section.

SECTION 3: Composition/information on ingredients

[1] Substance classified with a health or environmental hazard

[2] Substance with a workplace exposure limit

[3] Substance meets the criteria for PBT according to Regulation (EC) No. 1907/2006, Annex XIII

[4] Substance meets the criteria for vPvB according to Regulation (EC) No. 1907/2006, Annex XIII

[5] Substance of equivalent concern

Type

Identifiers

67/548/EEC

Product/ingredient

name

See Section 16 for

the full text of the R-

phrases declared

above.

%

Type

Regulation (EC) No.

1272/2008 [CLP]

Classification

See Section 16 for the

full text of the H

statements declared

above.

Sodium hydroxide

REACH #:

01-2119457892-27

EC: 215-185-5

CAS: 1310-73-2

Index: 011-002-00-6

25 -

<35

C; R35

Skin Corr. 1A, H314

[1] [2]

Mixtures

3.2

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower

eyelids. Check for and remove any contact lenses. Continue to rinse for at least 15

minutes. Chemical burns must be treated promptly by a physician. Get medical

attention immediately. Call a poison center or physician.

4.1 Description of first aid measures

Eye contact

:

SECTION 4: First aid measures

Date of issue/Date of revision

:

2/11

7 November 2013

AC-BPL

SECTION 4: First aid measures

Wash out mouth with water. Remove dentures if any. If material has been

swallowed and the exposed person is conscious, give small quantities of water to

drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not

induce vomiting unless directed to do so by medical personnel. If vomiting occurs,

the head should be kept low so that vomit does not enter the lungs. Chemical burns

must be treated promptly by a physician. Never give anything by mouth to an

unconscious person. If unconscious, place in recovery position and get medical

attention immediately. Maintain an open airway. Loosen tight clothing such as a

collar, tie, belt or waistband. Remove victim to fresh air and keep at rest in a

position comfortable for breathing. Get medical attention immediately. Call a

poison center or physician.

Skin contact

Flush contaminated skin with plenty of water. Remove contaminated clothing and

shoes. Continue to rinse for at least 15 minutes. Chemical burns must be treated

promptly by a physician. Wash contaminated clothing before reusing. Clean shoes

thoroughly before reuse. Get medical attention immediately. Call a poison center or

physician.

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

If not breathing, if breathing is irregular or if respiratory arrest occurs, provide

artificial respiration or oxygen by trained personnel. If unconscious, place in

recovery position and get medical attention immediately. Maintain an open airway.

Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention

immediately. Call a poison center or physician.

Notes to physician

Treat symptomatically. Contact poison treatment specialist immediately if large

quantities have been ingested or inhaled.

Ingestion

Inhalation

:

:

:

:

Specific treatments

Protection of first-aiders

:

4.2 Most important symptoms and effects, both acute and delayed

Potential acute health effects

Inhalation

:

May give off gas, vapour or dust that is very irritating or corrosive to the respiratory

system.

Corrosive to the digestive tract. Causes burns. May cause burns to mouth, throat

and stomach.

:

Ingestion

Skin contact

:

Causes severe burns.

Causes serious eye damage.

:

Eye contact

Over-exposure signs/symptoms

Skin contact

Ingestion

Inhalation

Adverse symptoms may include the following:

respiratory tract irritation

coughing

Adverse symptoms may include the following:

stomach pains

Adverse symptoms may include the following:

pain or irritation

redness

blistering may occur

:

:

:

Eye contact

:

Adverse symptoms may include the following:

pain

watering

redness

4.3 Indication of any immediate medical attention and special treatment needed

No specific treatment.

:

No action shall be taken involving any personal risk or without suitable training.

Wash contaminated clothing thoroughly with water before removing it, or wear

gloves.

Date of issue/Date of revision

:

3/11

7 November 2013

AC-BPL

Promptly isolate the scene by removing all persons from the vicinity of the incident if

there is a fire. No action shall be taken involving any personal risk or without

suitable training.

Hazardous combustion

products

Hazards from the

substance or mixture

Decomposition products may include the following materials:

metal oxide/oxides

In a fire or if heated, a pressure increase will occur and the container may burst.

Fire-fighters should wear appropriate protective equipment and self-contained

breathing apparatus (SCBA) with a full face-piece operated in positive pressure

mode.

Special protective

equipment for fire-fighters

In case of fire, use water spray (fog), foam, dry chemical, or CO

5.1 Extinguishing media

:

:

:

None known.

Suitable extinguishing

media

:

Unsuitable extinguishing

media

:

SECTION 5: Firefighting measures

5.2 Special hazards arising from the substance or mixture

5.3 Advice for firefighters

Special precautions for

fire-fighters

:

6.2 Environmental

precautions

Stop leak if without risk. Move containers from spill area. Approach the release

from upwind. Prevent entry into sewers, water courses, basements or confined

areas. Wash spillages into an effluent treatment plant or proceed as follows.

Contain and collect spillage with non-combustible, absorbent material e.g. sand,

earth, vermiculite or diatomaceous earth and place in container for disposal

according to local regulations. Contaminated absorbent material may pose the

same hazard as the spilt product.

Avoid dispersal of spilt material and runoff and contact with soil, waterways, drains

and sewers. Inform the relevant authorities if the product has caused environmental

pollution (sewers, waterways, soil or air).

Large spill

:

Stop leak if without risk. Move containers from spill area. Dilute with water and mop

up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry

material and place in an appropriate waste disposal container.

Small spill:

:

6.3 Methods and materials for containment and cleaning up

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

For non-emergency

personnel

:

For emergency responders

:

6.4 Reference to other

sections

See Section 1 for emergency contact information.

See Section 8 for information on appropriate personal protective equipment.

See Section 13 for additional waste treatment information.

No action shall be taken involving any personal risk or without suitable training.

Keep unnecessary and unprotected personnel from entering. Try to avoid touching

or walking through spilt material. Do not breathe vapour or mist. Provide adequate

ventilation. Wear appropriate respirator when ventilation is inadequate. Put on

appropriate personal protective equipment.

If specialised clothing is required to deal with the spillage, take note of any

information in Section 8 on suitable and unsuitable materials. See also the

information in "For non-emergency personnel".

:

:

Date of issue/Date of revision

:

4/11

7 November 2013

AC-BPL

Store between the following temperatures: 0 to 40°C (32 to 104°F). Store in

accordance with local regulations. Store in original container protected from direct

sunlight in a dry, cool and well-ventilated area, away from incompatible materials

(see Section 10) and food and drink. Separate from acids. Keep container tightly

closed and sealed until ready for use. Containers that have been opened must be

carefully resealed and kept upright to prevent leakage. Do not store in unlabelled

containers. Use appropriate containment to avoid environmental contamination.

SECTION 7: Handling and storage

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be

consulted for any available use-specific information provided in the Exposure Scenario(s).

7.1 Precautions for safe handling

Protective measures

:

Advice on general

occupational hygiene

:

7.2 Conditions for safe

storage, including any

incompatibilities

7.3 Specific end use(s)

Put on appropriate personal protective equipment (see Section 8). Do not get in

eyes or on skin or clothing. Do not breathe vapour or mist. Do not ingest. If during

normal use the material presents a respiratory hazard, use only with adequate

ventilation or wear appropriate respirator. Keep in the original container or an

approved alternative made from a compatible material, kept tightly closed when not

in use. Keep away from acids.

Workers should wash hands and face before eating, drinking and smoking. See

also Section 8 for additional information on hygiene measures.

:

Recommendations

:

Industrial sector specific

solutions

:

Not applicable until Exposure Scenarios for substances become available.

Not applicable until Exposure Scenarios for substances become available.

Highly recommended : Goggles, face shield, or other full-face protection.

Eye/face protection

(EN 166)

:

Skin protection

Appropriate engineering

controls

:

If user operations generate dust, fumes, gas, vapour or mist, use process

enclosures, local exhaust ventilation or other engineering controls to keep worker

exposure to airborne contaminants below any recommended or statutory limits.

Wash hands, forearms and face thoroughly after handling chemical products,

before eating, smoking and using the lavatory and at the end of the working period.

Appropriate techniques should be used to remove potentially contaminated clothing.

Wash contaminated clothing before reusing. Ensure that eyewash stations and

safety showers are close to the workstation location.

8.2 Exposure controls

Hygiene measures

:

No DNELs available for the mixture.

Predicted effect concentrations

No PNECs available for the mixture.

SECTION 8: Exposure controls/personal protection

8.1 Control parameters

Derived effect levels

Individual protection measures

Product/ingredient name

Exposure limit values

Occupational exposure limits

Sodium hydroxide

NAOSH (Ireland, 5/2010).

STEL: 2 mg/m³ 15 minutes.

Date of issue/Date of revision

:

5/11

7 November 2013

AC-BPL

SECTION 8: Exposure controls/personal protection

Hand protection

(EN 374)

Use a properly fitted, air-purifying or air-fed respirator complying with an approved

standard if a risk assessment indicates this is necessary. Respirator selection

must be based on known or anticipated exposure levels, the hazards of the product

and the safe working limits of the selected respirator.

Highly recommended : Gloves - butyl rubber , nitrile rubber ( Breakthrough time: 1 -

4 hours ) .

Respiratory protection

(EN 143, 14387)

:

:

Personal protective equipment for the body should be selected based on the task

being performed and the risks involved and should be approved by a specialist

before handling this product.

:

Environmental exposure

controls

:

Emissions from ventilation or work process equipment should be checked to

ensure they comply with the requirements of environmental protection legislation.

In some cases, fume scrubbers, filters or engineering modifications to the process

equipment will be necessary to reduce emissions to acceptable levels.

Body protection

(EN 14605)

:

Other skin protection

Thermal hazards

:

Appropriate footwear and any additional skin protection measures should be

selected based on the task being performed and the risks involved and should be

approved by a specialist before handling this product.

Not applicable.

SECTION 9: Physical and chemical properties

Physical state

Melting point/freezing point

Initial boiling point and

boiling range

Vapour pressure

Relative density

Vapour density

Solubility(ies)

Liquid.

1.325 to 1.34

Easily soluble in the following materials: cold water and hot water.

Faint odour

Odour

pH

Amber [Light]

Colour

Evaporation rate

Auto-ignition temperature

Flash point

> 100°C

Product does not support combustion.

13 to 14 [Conc. (% w/w): 100%]

Odour threshold

Partition coefficient: n-octanol/

water

Explosive properties

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

:

None.

Oxidising properties

:

9.1 Information on basic physical and chemical properties

Appearance

Burning time

Burning rate

:

:

Decomposition temperature

:

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable and/or not determined for the mixture.

Not applicable.

Not applicable and/or not determined for the mixture.

Viscosity

:

Upper/lower flammability or

explosive limits

:

Not applicable and/or not determined for the mixture.

Flammability (solid, gas)

:

Not applicable and/or not determined for the mixture.

Date of issue/Date of revision

:

6/11

7 November 2013

AC-BPL

SECTION 9: Physical and chemical properties

9.2 Other information

No additional information.

10.6 Hazardous

decomposition products

10.4 Conditions to avoid

No specific data.

Under normal conditions of storage and use, hazardous decomposition products

should not be produced.

The product is stable.

10.2 Chemical stability

:

:

:

10.5 Incompatible materials

:

10.3 Possibility of

hazardous reactions

:

Under normal conditions of storage and use, hazardous reactions will not occur.

SECTION 10: Stability and reactivity

10.1 Reactivity

:

No specific test data related to reactivity available for this product or its ingredients.

Extremely reactive or incompatible with the following materials: organic materials,

metals and acids.

Potential acute health effects

Acute toxicity

Carcinogenicity

Mutagenicity

Teratogenicity

Reproductive toxicity

Irritation/Corrosion

Conclusion/Summary

:

No known significant effects or critical hazards.

Sensitiser

Conclusion/Summary

:

No known significant effects or critical hazards.

SECTION 11: Toxicological information

11.1 Information on toxicological effects

Acute toxicity estimates

Not determined for the mixture.

Specific target organ toxicity (single exposure)

Specific target organ toxicity (repeated exposure)

Aspiration hazard

No known significant effects or critical hazards.

No known significant effects or critical hazards.

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Information on the likely

routes of exposure

:

No known significant effects or critical hazards.

Date of issue/Date of revision

:

7/11

7 November 2013

AC-BPL

SECTION 11: Toxicological information

Potential chronic health effects

Inhalation

:

May give off gas, vapour or dust that is very irritating or corrosive to the respiratory

system.

Corrosive to the digestive tract. Causes burns. May cause burns to mouth, throat

and stomach.

:

Ingestion

Skin contact

:

Causes severe burns.

Causes serious eye damage.

:

Eye contact

No known significant effects or critical hazards.

General

:

No known significant effects or critical hazards.

Carcinogenicity

:

No known significant effects or critical hazards.

Mutagenicity

:

No known significant effects or critical hazards.

Teratogenicity

:

Developmental effects

:

No known significant effects or critical hazards.

Fertility effects

:

No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Skin contact

Ingestion

Inhalation

No specific data.

Adverse symptoms may include the following:

stomach pains

Adverse symptoms may include the following:

pain or irritation

redness

blistering may occur

:

:

:

Eye contact

:

Adverse symptoms may include the following:

pain

watering

redness

Delayed and immediate effects and also chronic effects from short and long term exposure

Short term exposure

Long term exposure

Potential immediate

effects

:

Potential delayed effects

:

Potential immediate

effects

:

Potential delayed effects

:

No known significant effects or critical hazards.

No known significant effects or critical hazards.

No known significant effects or critical hazards.

No known significant effects or critical hazards.

Conclusion/Summary

:

No known significant effects or critical hazards.

Other information

:

No known significant effects or critical hazards.

SECTION 12: Ecological information

12.1 Toxicity

Sodium hydroxide

Acute EC50 40 mg/l

Daphnia

48 hours

Product/ingredient name

Species

Result

Exposure

12.2 Persistence and degradability

Conclusion/Summary

:

No known significant effects or critical hazards.

Date of issue/Date of revision

:

8/11

7 November 2013

AC-BPL

SECTION 12: Ecological information

12.3 Bioaccumulative potential

12.6 Other adverse effects

No known significant effects or critical hazards.

Conclusion/Summary

:

If acidic or alkaline products are discharged into wastewater installations care must

be taken that the discharged wastewater has a pH in the range pH 6 - 10, as pH

variations could cause disorders in wastewater channels and biological sewage

treatment plants. The local discharge regulations take precedence. The rest of the

organic substances are (can be) removed in sewage treatment plants to the extent

of 80 % or more. This product contains other organic substances which do not

reach the threshold values for "readily biodegradable" (e.g. EDTA).

PBT

:

Not applicable.

vPvB

:

Not applicable.

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

:

Soil/water partition

coefficient (K

OC

)

:

Not determined for the mixture.

Mobility

:

Not determined for the mixture.

Conclusion/Summary

:

Not determined for the mixture.

European waste catalogue (EWC)

Yes.

Hazardous waste

:

The generation of waste should be avoided or minimised wherever possible. Empty

containers or liners may retain some product residues. This material and its

container must be disposed of in a safe way. Significant quantities of waste product

residues should not be disposed of via the foul sewer but processed in a suitable

effluent treatment plant. Dispose of surplus and non-recyclable products via a

licensed waste disposal contractor. Disposal of this product, solutions and any by-

products should at all times comply with the requirements of environmental

protection and waste disposal legislation and any regional local authority

requirements. Avoid dispersal of spilt material and runoff and contact with soil,

waterways, drains and sewers.

:

Methods of disposal

SECTION 13: Disposal considerations

The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be

consulted for any available use-specific information provided in the Exposure Scenario(s).

13.1 Waste treatment methods

Product

Packaging

Waste code

Waste designation

Methods of disposal

:

Special precautions

:

20 01 15*

alkalines

The generation of waste should be avoided or minimised wherever possible. Waste

packaging should be recycled.

This material and its container must be disposed of in a safe way. Care should be

taken when handling emptied containers that have not been cleaned or rinsed out.

Empty containers or liners may retain some product residues. Avoid dispersal of

spilt material and runoff and contact with soil, waterways, drains and sewers.

Date of issue/Date of revision

:

9/11

7 November 2013

AC-BPL

SODIUM

HYDROXIDE

SOLUTION

SODIUM

HYDROXIDE

SOLUTION

Sodium hydroxide

solution

UN1824

SODIUM

HYDROXIDE

SOLUTION

UN1824

UN1824

UN1824

SECTION 14: Transport information

ADR/RID

IMDG

IATA

14.1 UN number

14.2 UN proper

shipping name

14.3 Transport

hazard class(es)

14.4 Packing

group

ADN/ADNR

14.5

Environmental

hazards

14.6 Special

precautions for

user

14.7 Transport in bulk

according to Annex II of

MARPOL 73/78 and the IBC

Code

:

Not applicable.

None.

None.

None.

None.

National regulations

Other EU regulations

Not applicable.

Annex XVII - Restrictions

on the manufacture,

placing on the market

and use of certain

dangerous substances,

mixtures and articles

:

Ireland

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

EU Regulation (EC) No. 1907/2006 (REACH)

Annex XIV - List of substances subject to authorisation

Substances of very high concern

None of the components are listed.

<5% polycarboxylates

Ingredient declaration according to detergent regulation 648/2004/EC:

Safety, Health and Welfare at Work Act, 2005

European Communities (Classification, Packaging, Labelling and Notification of Dangerous Preparations)

Regulations 1995. (S.I. 272 of 1995) as amended

Date of issue/Date of revision

:

10/11

7 November 2013

AC-BPL

SECTION 15: Regulatory information

15.2 Chemical Safety

Assessment

This product contains substances for which Chemical Safety Assessments are still

required.

:

7 November 2013

Date of printing

Date of issue/ Date of

revision

Version

The above information is believed to be correct with respect to the formula used to manufacture the product

in the country of origin. As data, standards, and regulations change, and conditions of use and handling are

beyond our control, NO WARRANTY, EXPRESS OR IMPLIED, IS MADE AS TO THE COMPLETENESS OR

CONTINUING ACCURACY OF THIS INFORMATION.

Notice to reader

Date of previous issue

:

:

:

:

R35- Causes severe burns.

:

Full text of abbreviated R

phrases

Full text of classifications

[DSD/DPD]

:

C - Corrosive

Indicates information that has changed from previously issued version.

7 November 2013

25 July 2012

SECTION 16: Other information

Full text of abbreviated H

statements

:

Abbreviations and

acronyms

:

ADN = European Provisions concerning the International Carriage of Dangerous

Goods by Inland Waterway

ADR = The European Agreement concerning the International Carriage of

Dangerous Goods by Road

ATE = Acute Toxicity Estimate

BCF = Bioconcentration Factor

CLP = Classification, Labelling and Packaging Regulation [Regulation (EC) No.

1272/2008]

DNEL = Derived No Effect Level

DPD = Dangerous Preparations Directive [1999/45/EC]

EC = European Commission

EUH statement = CLP-specific Hazard statement

IATA = International Air Transport Association

IBC = Intermediate Bulk Container

IMDG = International Maritime Dangerous Goods

LogPow = logarithm of the octanol/water partition coefficient

MARPOL 73/78 = International Convention for the Prevention of Pollution From

Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)

OEL = Occupational Exposure Limit

PBT = Persistent, Bioaccumulative and Toxic

PNEC = Predicted No Effect Concentration

REACH = Registration, Evaluation, Authorisation and Restriction of Chemicals

Regulation [Regulation (EC) No. 1907/2006]

RID = The Regulations concerning the International Carriage of Dangerous Goods

by Rail

REACH # = REACH Registration Number

vPvB = Very Persistent and Very Bioaccumulative

Procedure used to derive the classification according to Regulation (EC) No. 1272/2008 [CLP/GHS]

Classification

Justification

Skin Corr. 1, H314

On basis of test data

Full text of classifications

[CLP/GHS]

:

H314

Causes severe skin burns and eye damage.

Skin Corr. 1, H314

SKIN CORROSION/IRRITATION - Category 1

Skin Corr. 1A, H314

SKIN CORROSION/IRRITATION - Category 1A

Date of issue/Date of revision

:

11/11

7 November 2013